# Copyright 2025 Google LLC. All Rights Reserved.
# 
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# 
#     http://www.apache.org/licenses/LICENSE-2.0
# 
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
info:
  title: Compute/UrlMap
  description: The Compute UrlMap resource
  x-dcl-struct-name: UrlMap
  x-dcl-has-iam: false
paths:
  get:
    description: The function used to get information about a UrlMap
    parameters:
    - name: urlMap
      required: true
      description: A full instance of a UrlMap
  apply:
    description: The function used to apply information about a UrlMap
    parameters:
    - name: urlMap
      required: true
      description: A full instance of a UrlMap
  delete:
    description: The function used to delete a UrlMap
    parameters:
    - name: urlMap
      required: true
      description: A full instance of a UrlMap
  deleteAll:
    description: The function used to delete all UrlMap
    parameters:
    - name: project
      required: true
      schema:
        type: string
    - name: location
      required: true
      schema:
        type: string
  list:
    description: The function used to list information about many UrlMap
    parameters:
    - name: project
      required: true
      schema:
        type: string
    - name: location
      required: true
      schema:
        type: string
components:
  schemas:
    UrlMap:
      title: UrlMap
      x-dcl-id: projects/{{project}}/global/urlMaps/{{name}}
      x-dcl-locations:
      - region
      - global
      x-dcl-parent-container: project
      x-dcl-has-create: true
      x-dcl-has-iam: false
      x-dcl-read-timeout: 0
      x-dcl-apply-timeout: 0
      x-dcl-delete-timeout: 0
      type: object
      properties:
        defaultRouteAction:
          type: object
          x-dcl-go-name: DefaultRouteAction
          x-dcl-go-type: UrlMapDefaultRouteAction
          description: |-
            `defaultRouteAction` takes effect when none of the `hostRule`s match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If `defaultRouteAction` specifies any `weightedBackendService`s, `defaultService` must not be set. Conversely if `defaultService` is set, `defaultRouteAction` cannot contain any weightedBackendServices.

            Only one of `defaultRouteAction` or `defaultUrlRedirect` must be set.
          properties:
            corsPolicy:
              type: object
              x-dcl-go-name: CorsPolicy
              x-dcl-go-type: UrlMapDefaultRouteActionCorsPolicy
              description: The specification for allowing client side cross-origin
                requests. Please see [W3C Recommendation for Cross Origin Resource
                Sharing](https://www.w3.org/TR/cors/)
              properties:
                allowCredentials:
                  type: boolean
                  x-dcl-go-name: AllowCredentials
                  description: |-
                    In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the `Access-Control-Allow-Credentials` header.

                    Default is false.
                allowHeader:
                  type: array
                  x-dcl-go-name: AllowHeader
                  description: Specifies the content for the `Access-Control-Allow-Headers`
                    header.
                  x-dcl-send-empty: true
                  x-dcl-list-type: list
                  items:
                    type: string
                    x-dcl-go-type: string
                allowMethod:
                  type: array
                  x-dcl-go-name: AllowMethod
                  description: Specifies the content for the `Access-Control-Allow-Methods`
                    header.
                  x-dcl-send-empty: true
                  x-dcl-list-type: list
                  items:
                    type: string
                    x-dcl-go-type: string
                allowOrigin:
                  type: array
                  x-dcl-go-name: AllowOrigin
                  description: |-
                    Specifies the list of origins that will be allowed to do CORS requests.

                    An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                  x-dcl-send-empty: true
                  x-dcl-list-type: list
                  items:
                    type: string
                    x-dcl-go-type: string
                allowOriginRegex:
                  type: array
                  x-dcl-go-name: AllowOriginRegex
                  description: |-
                    Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see [en.cppreference.com/w/cpp/regex/ecmascript](https://en.cppreference.com/w/cpp/regex/ecmascript)

                    An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                  x-dcl-send-empty: true
                  x-dcl-list-type: list
                  items:
                    type: string
                    x-dcl-go-type: string
                disabled:
                  type: boolean
                  x-dcl-go-name: Disabled
                  description: If true, specifies the CORS policy is disabled. The
                    default value of false, which indicates that the CORS policy is
                    in effect.
                exposeHeader:
                  type: array
                  x-dcl-go-name: ExposeHeader
                  description: Specifies the content for the `Access-Control-Expose-Headers`
                    header.
                  x-dcl-send-empty: true
                  x-dcl-list-type: list
                  items:
                    type: string
                    x-dcl-go-type: string
                maxAge:
                  type: integer
                  format: int64
                  x-dcl-go-name: MaxAge
                  description: Specifies how long results of a preflight request can
                    be cached in seconds. This translates to the `Access-Control-Max-Age`
                    header.
            faultInjectionPolicy:
              type: object
              x-dcl-go-name: FaultInjectionPolicy
              x-dcl-go-type: UrlMapDefaultRouteActionFaultInjectionPolicy
              description: |-
                The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests.

                `timeout` and `retry_policy` will be ignored by clients that are configured with a `fault_injection_policy`.
              properties:
                abort:
                  type: object
                  x-dcl-go-name: Abort
                  x-dcl-go-type: UrlMapDefaultRouteActionFaultInjectionPolicyAbort
                  description: The specification for how client requests are aborted
                    as part of fault injection.
                  properties:
                    httpStatus:
                      type: integer
                      format: int64
                      x-dcl-go-name: HttpStatus
                      description: |-
                        The HTTP status code used to abort the request.

                        The value must be between 200 and 599 inclusive.
                    percentage:
                      type: number
                      format: double
                      x-dcl-go-name: Percentage
                      description: |-
                        The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection.

                        The value must be between 0.0 and 100.0 inclusive.
                delay:
                  type: object
                  x-dcl-go-name: Delay
                  x-dcl-go-type: UrlMapDefaultRouteActionFaultInjectionPolicyDelay
                  description: The specification for how client requests are delayed
                    as part of fault injection, before being sent to a backend service.
                  properties:
                    fixedDelay:
                      type: object
                      x-dcl-go-name: FixedDelay
                      x-dcl-go-type: UrlMapDefaultRouteActionFaultInjectionPolicyDelayFixedDelay
                      description: Specifies the value of the fixed delay interval.
                      properties:
                        nanos:
                          type: integer
                          format: int64
                          x-dcl-go-name: Nanos
                          description: Span of time that's a fraction of a second
                            at nanosecond resolution. Durations less than one second
                            are represented with a 0 `seconds` field and a positive
                            `nanos` field. Must be from 0 to 999,999,999 inclusive.
                        seconds:
                          type: integer
                          format: int64
                          x-dcl-go-name: Seconds
                          description: 'Span of time at a resolution of a second.
                            Must be from 0 to 315,576,000,000 inclusive. Note: these
                            bounds are computed from: 60 sec/min * 60 min/hr * 24
                            hr/day * 365.25 days/year * 10000 years'
                    percentage:
                      type: number
                      format: double
                      x-dcl-go-name: Percentage
                      description: |-
                        The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection.

                        The value must be between 0.0 and 100.0 inclusive.
            requestMirrorPolicy:
              type: object
              x-dcl-go-name: RequestMirrorPolicy
              x-dcl-go-type: UrlMapDefaultRouteActionRequestMirrorPolicy
              description: Specifies the policy on how requests intended for the route's
                backends are shadowed to a separate mirrored backend service. Loadbalancer
                does not wait for responses from the shadow service. Prior to sending
                traffic to the shadow service, the host / authority header is suffixed
                with `-shadow`.
              properties:
                backendService:
                  type: string
                  x-dcl-go-name: BackendService
                  description: The full or partial URL to the BackendService resource
                    being mirrored to.
            retryPolicy:
              type: object
              x-dcl-go-name: RetryPolicy
              x-dcl-go-type: UrlMapDefaultRouteActionRetryPolicy
              description: Specifies the retry policy associated with this route.
              properties:
                numRetries:
                  type: integer
                  format: int64
                  x-dcl-go-name: NumRetries
                  description: Specifies the allowed number retries. This number must
                    be > 0. If not specified, defaults to 1.
                perTryTimeout:
                  type: object
                  x-dcl-go-name: PerTryTimeout
                  x-dcl-go-type: UrlMapDefaultRouteActionRetryPolicyPerTryTimeout
                  description: |-
                    Specifies a non-zero timeout per retry attempt.

                    If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route.
                  properties:
                    nanos:
                      type: integer
                      format: int64
                      x-dcl-go-name: Nanos
                      description: Span of time that's a fraction of a second at nanosecond
                        resolution. Durations less than one second are represented
                        with a 0 `seconds` field and a positive `nanos` field. Must
                        be from 0 to 999,999,999 inclusive.
                    seconds:
                      type: integer
                      format: int64
                      x-dcl-go-name: Seconds
                      description: 'Span of time at a resolution of a second. Must
                        be from 0 to 315,576,000,000 inclusive. Note: these bounds
                        are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25
                        days/year * 10000 years'
                retryCondition:
                  type: array
                  x-dcl-go-name: RetryCondition
                  description: |-
                    Specfies one or more conditions when this retry rule applies. Valid values are:

                    *   `5xx`: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout, connection failure, and refused streams.
                    *   `gateway-error`: Similar to 5xx, but only applies to response codes 502, 503 or 504.

                    *   `connect-failure`: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
                    *   `retriable-4xx`: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
                    *   `refused-stream`:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
                    *   `cancelled`Loadbalancer will retry if the gRPC status code in the response header is set to `cancelled`
                    *   `deadline-exceeded`: Loadbalancer will retry if the gRPC status code in the response header is set to `deadline-exceeded`
                    *   `resource-exhausted`: Loadbalancer will retry if the gRPC status code in the response header is set to `resource-exhausted`
                    *   `unavailable`: Loadbalancer will retry if the gRPC status code in the response header is set to `unavailable`
                  x-dcl-send-empty: true
                  x-dcl-list-type: list
                  items:
                    type: string
                    x-dcl-go-type: string
            timeout:
              type: object
              x-dcl-go-name: Timeout
              x-dcl-go-type: UrlMapDefaultRouteActionTimeout
              description: |-
                Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries.

                If not specified, will use the largest timeout among all backend services associated with the route.
              properties:
                nanos:
                  type: integer
                  format: int64
                  x-dcl-go-name: Nanos
                  description: Span of time that's a fraction of a second at nanosecond
                    resolution. Durations less than one second are represented with
                    a 0 `seconds` field and a positive `nanos` field. Must be from
                    0 to 999,999,999 inclusive.
                seconds:
                  type: integer
                  format: int64
                  x-dcl-go-name: Seconds
                  description: 'Span of time at a resolution of a second. Must be
                    from 0 to 315,576,000,000 inclusive. Note: these bounds are computed
                    from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year *
                    10000 years'
            urlRewrite:
              type: object
              x-dcl-go-name: UrlRewrite
              x-dcl-go-type: UrlMapDefaultRouteActionUrlRewrite
              description: The spec to modify the URL of the request, prior to forwarding
                the request to the matched service.
              properties:
                hostRewrite:
                  type: string
                  x-dcl-go-name: HostRewrite
                  description: |-
                    Prior to forwarding the request to the selected service, the request's host header is replaced with contents of `hostRewrite`.

                    The value must be between 1 and 255 characters.
                pathPrefixRewrite:
                  type: string
                  x-dcl-go-name: PathPrefixRewrite
                  description: |-
                    Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by `pathPrefixRewrite`.

                    The value must be between 1 and 1024 characters.
            weightedBackendService:
              type: array
              x-dcl-go-name: WeightedBackendService
              description: |-
                A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding `backend service`. If all traffic needs to go to a single backend service, there must be one `weightedBackendService` with weight set to a non 0 number.

                Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this `HttpRouteAction`.
              x-dcl-send-empty: true
              x-dcl-list-type: list
              items:
                type: object
                x-dcl-go-type: UrlMapDefaultRouteActionWeightedBackendService
                properties:
                  backendService:
                    type: string
                    x-dcl-go-name: BackendService
                    description: The full or partial URL to the default BackendService
                      resource. Before forwarding the request to `backendService`,
                      the loadbalancer applies any relevant `headerActions` specified
                      as part of this `backendServiceWeight`.
                    x-dcl-references:
                    - resource: Compute/BackendBucket
                      field: selfLink
                    - resource: Compute/BackendService
                      field: selfLink
                  headerAction:
                    type: object
                    x-dcl-go-name: HeaderAction
                    x-dcl-go-type: UrlMapDefaultRouteActionWeightedBackendServiceHeaderAction
                    description: |-
                      Specifies changes to request and response headers that need to take effect for the selected `backendService`.

                      `headerAction` specified here take effect before `headerAction` in the enclosing `HttpRouteRule`, `PathMatcher` and `UrlMap`.
                    properties:
                      requestHeadersToAdd:
                        type: array
                        x-dcl-go-name: RequestHeadersToAdd
                        description: Headers to add to a matching request prior to
                          forwarding the request to the `backendService`.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: object
                          x-dcl-go-type: UrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd
                          properties:
                            headerName:
                              type: string
                              x-dcl-go-name: HeaderName
                              description: The name of the header.
                            headerValue:
                              type: string
                              x-dcl-go-name: HeaderValue
                              description: The value of the header to add.
                            replace:
                              type: boolean
                              x-dcl-go-name: Replace
                              description: |-
                                If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                The default value is false.
                      requestHeadersToRemove:
                        type: array
                        x-dcl-go-name: RequestHeadersToRemove
                        description: A list of header names for headers that need
                          to be removed from the request prior to forwarding the request
                          to the `backendService`.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                      responseHeadersToAdd:
                        type: array
                        x-dcl-go-name: ResponseHeadersToAdd
                        description: Headers to add the response prior to sending
                          the response back to the client.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: object
                          x-dcl-go-type: UrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd
                          properties:
                            headerName:
                              type: string
                              x-dcl-go-name: HeaderName
                              description: The name of the header.
                            headerValue:
                              type: string
                              x-dcl-go-name: HeaderValue
                              description: The value of the header to add.
                            replace:
                              type: boolean
                              x-dcl-go-name: Replace
                              description: |-
                                If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                The default value is false.
                      responseHeadersToRemove:
                        type: array
                        x-dcl-go-name: ResponseHeadersToRemove
                        description: A list of header names for headers that need
                          to be removed from the response prior to sending the response
                          back to the client.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                  weight:
                    type: integer
                    format: int64
                    x-dcl-go-name: Weight
                    description: |-
                      Specifies the fraction of traffic sent to backendService, computed as `weight / (sum of all weightedBackendService weights in routeAction)` .

                      The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a `backendService`, subsequent requests will be sent to the same `backendService` as determined by the `BackendService`'s session affinity policy.

                      The value must be between 0 and 1000
        defaultService:
          type: string
          x-dcl-go-name: DefaultService
          description: |-
            The full or partial URL of the `defaultService` resource to which traffic is directed if none of the `hostRule`s match. If `defaultRouteAction` is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if `defaultService` is specified, `defaultRouteAction` cannot contain any `weightedBackendService`s. Conversely, if `routeAction` specifies any `weightedBackendService`s, `service` must not be specified.

            Only one of `defaultService`, `defaultUrlRedirect` or `defaultRouteAction.weightedBackendService` must be set.
        defaultUrlRedirect:
          type: object
          x-dcl-go-name: DefaultUrlRedirect
          x-dcl-go-type: UrlMapDefaultUrlRedirect
          description: |-
            When none of the specified `hostRule`s match, the request is redirected to a URL specified by `defaultUrlRedirect`.

            If `defaultUrlRedirect` is specified, `defaultService` or `defaultRouteAction` must not be set.
          properties:
            hostRedirect:
              type: string
              x-dcl-go-name: HostRedirect
              description: |-
                The host that will be used in the redirect response instead of the one that was supplied in the request.

                The value must be between 1 and 255 characters.
            httpsRedirect:
              type: boolean
              x-dcl-go-name: HttpsRedirect
              description: |-
                If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request.

                This must only be set for `UrlMap`s used in `TargetHttpProxy`s. Setting this true for `TargetHttpsProxy` is not permitted.

                The default is set to false.
            pathRedirect:
              type: string
              x-dcl-go-name: PathRedirect
              description: |-
                The path that will be used in the redirect response instead of the one that was supplied in the request.

                `pathRedirect` cannot be supplied together with `prefixRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                The value must be between 1 and 1024 characters.
            prefixRedirect:
              type: string
              x-dcl-go-name: PrefixRedirect
              description: |-
                The prefix that replaces the `prefixMatch` specified in the `HttpRouteRuleMatch`, retaining the remaining portion of the URL before redirecting the request.

                `prefixRedirect` cannot be supplied together with `pathRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                The value must be between 1 and 1024 characters.
            redirectResponseCode:
              type: string
              x-dcl-go-name: RedirectResponseCode
              x-dcl-go-type: UrlMapDefaultUrlRedirectRedirectResponseCodeEnum
              description: |-
                The HTTP Status code to use for this RedirectAction.

                Supported values are:

                *   MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
                *   FOUND, which corresponds to 302.
                *   SEE_OTHER which corresponds to 303.
                *   TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
                *   PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
              enum:
              - MOVED_PERMANENTLY_DEFAULT
              - FOUND
              - SEE_OTHER
              - TEMPORARY_REDIRECT
              - PERMANENT_REDIRECT
            stripQuery:
              type: boolean
              x-dcl-go-name: StripQuery
              description: |-
                If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained.

                The default is set to false.
        description:
          type: string
          x-dcl-go-name: Description
          description: An optional description of this resource. Provide this property
            when you create the resource.
        headerAction:
          type: object
          x-dcl-go-name: HeaderAction
          x-dcl-go-type: UrlMapHeaderAction
          description: |-
            Specifies changes to request and response headers that need to take effect for the selected `backendService`.

            The `headerAction` specified here take effect after `headerAction` specified under `pathMatcher`.
          properties:
            requestHeadersToAdd:
              type: array
              x-dcl-go-name: RequestHeadersToAdd
              description: Headers to add to a matching request prior to forwarding
                the request to the `backendService`.
              x-dcl-send-empty: true
              x-dcl-list-type: list
              items:
                type: object
                x-dcl-go-type: UrlMapHeaderActionRequestHeadersToAdd
                properties:
                  headerName:
                    type: string
                    x-dcl-go-name: HeaderName
                    description: The name of the header.
                  headerValue:
                    type: string
                    x-dcl-go-name: HeaderValue
                    description: The value of the header to add.
                  replace:
                    type: boolean
                    x-dcl-go-name: Replace
                    description: |-
                      If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                      The default value is false.
            requestHeadersToRemove:
              type: array
              x-dcl-go-name: RequestHeadersToRemove
              description: A list of header names for headers that need to be removed
                from the request prior to forwarding the request to the `backendService`.
              x-dcl-send-empty: true
              x-dcl-list-type: list
              items:
                type: string
                x-dcl-go-type: string
            responseHeadersToAdd:
              type: array
              x-dcl-go-name: ResponseHeadersToAdd
              description: Headers to add the response prior to sending the response
                back to the client.
              x-dcl-send-empty: true
              x-dcl-list-type: list
              items:
                type: object
                x-dcl-go-type: UrlMapHeaderActionResponseHeadersToAdd
                properties:
                  headerName:
                    type: string
                    x-dcl-go-name: HeaderName
                    description: The name of the header.
                  headerValue:
                    type: string
                    x-dcl-go-name: HeaderValue
                    description: The value of the header to add.
                  replace:
                    type: boolean
                    x-dcl-go-name: Replace
                    description: |-
                      If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                      The default value is false.
            responseHeadersToRemove:
              type: array
              x-dcl-go-name: ResponseHeadersToRemove
              description: A list of header names for headers that need to be removed
                from the response prior to sending the response back to the client.
              x-dcl-send-empty: true
              x-dcl-list-type: list
              items:
                type: string
                x-dcl-go-type: string
        hostRule:
          type: array
          x-dcl-go-name: HostRule
          description: The list of HostRules to use against the URL.
          x-dcl-send-empty: true
          x-dcl-list-type: set
          items:
            type: object
            x-dcl-go-type: UrlMapHostRule
            properties:
              description:
                type: string
                x-dcl-go-name: Description
                description: An optional description of this resource. Provide this
                  property when you create the resource.
              host:
                type: array
                x-dcl-go-name: Host
                description: The list of host patterns to match. They must be valid
                  hostnames with optional port numbers in the format `host`:`port`.
                  `*` matches any string of `([a-z0-9-.]*)`. In that case, `*` must
                  be the first character and must be followed in the pattern by either
                  `-` or `.`.
                x-dcl-send-empty: true
                x-dcl-list-type: list
                items:
                  type: string
                  x-dcl-go-type: string
              pathMatcher:
                type: string
                x-dcl-go-name: PathMatcher
                description: The name of the PathMatcher to use to match the path
                  portion of the URL if the `hostRule` matches the URL's host portion.
        location:
          type: string
          x-dcl-go-name: Location
          description: The location this URL Map resides in.
          x-kubernetes-immutable: true
          x-dcl-parameter: true
        name:
          type: string
          x-dcl-go-name: Name
          description: Name of the resource. Provided by the client when the resource
            is created. The name must be 1-63 characters long, and comply with [RFC1035](https://www.ietf.org/rfc/rfc1035.txt).
            Specifically, the name must be 1-63 characters long and match the regular
            expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character
            must be a lowercase letter, and all following characters must be a dash,
            lowercase letter, or digit, except the last character, which cannot be
            a dash.
        pathMatcher:
          type: array
          x-dcl-go-name: PathMatcher
          description: The list of named PathMatchers to use against the URL.
          x-dcl-send-empty: true
          x-dcl-list-type: set
          items:
            type: object
            x-dcl-go-type: UrlMapPathMatcher
            properties:
              defaultRouteAction:
                type: object
                x-dcl-go-name: DefaultRouteAction
                x-dcl-go-type: UrlMapPathMatcherDefaultRouteAction
                description: |-
                  `defaultRouteAction` takes effect when none of the `pathRule`s or `routeRule`s match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If `defaultRouteAction` specifies any `weightedBackendService`s, `defaultService` must not be set. Conversely if `defaultService` is set, `defaultRouteAction` cannot contain any weightedBackendServices.

                  Only one of `defaultRouteAction` or `defaultUrlRedirect` must be set.
                properties:
                  corsPolicy:
                    type: object
                    x-dcl-go-name: CorsPolicy
                    x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionCorsPolicy
                    description: The specification for allowing client side cross-origin
                      requests. Please see [W3C Recommendation for Cross Origin Resource
                      Sharing](https://www.w3.org/TR/cors/)
                    properties:
                      allowCredentials:
                        type: boolean
                        x-dcl-go-name: AllowCredentials
                        description: |-
                          In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the `Access-Control-Allow-Credentials` header.

                          Default is false.
                      allowHeader:
                        type: array
                        x-dcl-go-name: AllowHeader
                        description: Specifies the content for the `Access-Control-Allow-Headers`
                          header.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                      allowMethod:
                        type: array
                        x-dcl-go-name: AllowMethod
                        description: Specifies the content for the `Access-Control-Allow-Methods`
                          header.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                      allowOrigin:
                        type: array
                        x-dcl-go-name: AllowOrigin
                        description: |-
                          Specifies the list of origins that will be allowed to do CORS requests.

                          An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                      allowOriginRegex:
                        type: array
                        x-dcl-go-name: AllowOriginRegex
                        description: |-
                          Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see [en.cppreference.com/w/cpp/regex/ecmascript](https://en.cppreference.com/w/cpp/regex/ecmascript)

                          An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                      disabled:
                        type: boolean
                        x-dcl-go-name: Disabled
                        description: If true, specifies the CORS policy is disabled.
                          The default value of false, which indicates that the CORS
                          policy is in effect.
                      exposeHeader:
                        type: array
                        x-dcl-go-name: ExposeHeader
                        description: Specifies the content for the `Access-Control-Expose-Headers`
                          header.
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                      maxAge:
                        type: integer
                        format: int64
                        x-dcl-go-name: MaxAge
                        description: Specifies how long results of a preflight request
                          can be cached in seconds. This translates to the `Access-Control-Max-Age`
                          header.
                  faultInjectionPolicy:
                    type: object
                    x-dcl-go-name: FaultInjectionPolicy
                    x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionFaultInjectionPolicy
                    description: |-
                      The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests.

                      `timeout` and `retry_policy` will be ignored by clients that are configured with a `fault_injection_policy`.
                    properties:
                      abort:
                        type: object
                        x-dcl-go-name: Abort
                        x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionFaultInjectionPolicyAbort
                        description: The specification for how client requests are
                          aborted as part of fault injection.
                        properties:
                          httpStatus:
                            type: integer
                            format: int64
                            x-dcl-go-name: HttpStatus
                            description: |-
                              The HTTP status code used to abort the request.

                              The value must be between 200 and 599 inclusive.
                          percentage:
                            type: number
                            format: double
                            x-dcl-go-name: Percentage
                            description: |-
                              The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection.

                              The value must be between 0.0 and 100.0 inclusive.
                      delay:
                        type: object
                        x-dcl-go-name: Delay
                        x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelay
                        description: The specification for how client requests are
                          delayed as part of fault injection, before being sent to
                          a backend service.
                        properties:
                          fixedDelay:
                            type: object
                            x-dcl-go-name: FixedDelay
                            x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayFixedDelay
                            description: Specifies the value of the fixed delay interval.
                            properties:
                              nanos:
                                type: integer
                                format: int64
                                x-dcl-go-name: Nanos
                                description: Span of time that's a fraction of a second
                                  at nanosecond resolution. Durations less than one
                                  second are represented with a 0 `seconds` field
                                  and a positive `nanos` field. Must be from 0 to
                                  999,999,999 inclusive.
                              seconds:
                                type: integer
                                format: int64
                                x-dcl-go-name: Seconds
                                description: 'Span of time at a resolution of a second.
                                  Must be from 0 to 315,576,000,000 inclusive. Note:
                                  these bounds are computed from: 60 sec/min * 60
                                  min/hr * 24 hr/day * 365.25 days/year * 10000 years'
                          percentage:
                            type: number
                            format: double
                            x-dcl-go-name: Percentage
                            description: |-
                              The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection.

                              The value must be between 0.0 and 100.0 inclusive.
                  requestMirrorPolicy:
                    type: object
                    x-dcl-go-name: RequestMirrorPolicy
                    x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionRequestMirrorPolicy
                    description: Specifies the policy on how requests intended for
                      the route's backends are shadowed to a separate mirrored backend
                      service. Loadbalancer does not wait for responses from the shadow
                      service. Prior to sending traffic to the shadow service, the
                      host / authority header is suffixed with `-shadow`.
                    properties:
                      backendService:
                        type: string
                        x-dcl-go-name: BackendService
                        description: The full or partial URL to the BackendService
                          resource being mirrored to.
                  retryPolicy:
                    type: object
                    x-dcl-go-name: RetryPolicy
                    x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionRetryPolicy
                    description: Specifies the retry policy associated with this route.
                    properties:
                      numRetries:
                        type: integer
                        format: int64
                        x-dcl-go-name: NumRetries
                        description: Specifies the allowed number retries. This number
                          must be > 0. If not specified, defaults to 1.
                      perTryTimeout:
                        type: object
                        x-dcl-go-name: PerTryTimeout
                        x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionRetryPolicyPerTryTimeout
                        description: |-
                          Specifies a non-zero timeout per retry attempt.

                          If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route.
                        properties:
                          nanos:
                            type: integer
                            format: int64
                            x-dcl-go-name: Nanos
                            description: Span of time that's a fraction of a second
                              at nanosecond resolution. Durations less than one second
                              are represented with a 0 `seconds` field and a positive
                              `nanos` field. Must be from 0 to 999,999,999 inclusive.
                          seconds:
                            type: integer
                            format: int64
                            x-dcl-go-name: Seconds
                            description: 'Span of time at a resolution of a second.
                              Must be from 0 to 315,576,000,000 inclusive. Note: these
                              bounds are computed from: 60 sec/min * 60 min/hr * 24
                              hr/day * 365.25 days/year * 10000 years'
                      retryCondition:
                        type: array
                        x-dcl-go-name: RetryCondition
                        description: |-
                          Specfies one or more conditions when this retry rule applies. Valid values are:

                          *   `5xx`: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout, connection failure, and refused streams.
                          *   `gateway-error`: Similar to 5xx, but only applies to response codes 502, 503 or 504.

                          *   `connect-failure`: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
                          *   `retriable-4xx`: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
                          *   `refused-stream`:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
                          *   `cancelled`Loadbalancer will retry if the gRPC status code in the response header is set to `cancelled`
                          *   `deadline-exceeded`: Loadbalancer will retry if the gRPC status code in the response header is set to `deadline-exceeded`
                          *   `resource-exhausted`: Loadbalancer will retry if the gRPC status code in the response header is set to `resource-exhausted`
                          *   `unavailable`: Loadbalancer will retry if the gRPC status code in the response header is set to `unavailable`
                        x-dcl-send-empty: true
                        x-dcl-list-type: list
                        items:
                          type: string
                          x-dcl-go-type: string
                  timeout:
                    type: object
                    x-dcl-go-name: Timeout
                    x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionTimeout
                    description: |-
                      Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries.

                      If not specified, will use the largest timeout among all backend services associated with the route.
                    properties:
                      nanos:
                        type: integer
                        format: int64
                        x-dcl-go-name: Nanos
                        description: Span of time that's a fraction of a second at
                          nanosecond resolution. Durations less than one second are
                          represented with a 0 `seconds` field and a positive `nanos`
                          field. Must be from 0 to 999,999,999 inclusive.
                      seconds:
                        type: integer
                        format: int64
                        x-dcl-go-name: Seconds
                        description: 'Span of time at a resolution of a second. Must
                          be from 0 to 315,576,000,000 inclusive. Note: these bounds
                          are computed from: 60 sec/min * 60 min/hr * 24 hr/day *
                          365.25 days/year * 10000 years'
                  urlRewrite:
                    type: object
                    x-dcl-go-name: UrlRewrite
                    x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionUrlRewrite
                    description: The spec to modify the URL of the request, prior
                      to forwarding the request to the matched service.
                    properties:
                      hostRewrite:
                        type: string
                        x-dcl-go-name: HostRewrite
                        description: |-
                          Prior to forwarding the request to the selected service, the request's host header is replaced with contents of `hostRewrite`.

                          The value must be between 1 and 255 characters.
                      pathPrefixRewrite:
                        type: string
                        x-dcl-go-name: PathPrefixRewrite
                        description: |-
                          Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by `pathPrefixRewrite`.

                          The value must be between 1 and 1024 characters.
                  weightedBackendService:
                    type: array
                    x-dcl-go-name: WeightedBackendService
                    description: |-
                      A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding `backend service`. If all traffic needs to go to a single backend service, there must be one `weightedBackendService` with weight set to a non 0 number.

                      Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this `HttpRouteAction`.
                    x-dcl-send-empty: true
                    x-dcl-list-type: list
                    items:
                      type: object
                      x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionWeightedBackendService
                      properties:
                        backendService:
                          type: string
                          x-dcl-go-name: BackendService
                          description: The full or partial URL to the default BackendService
                            resource. Before forwarding the request to `backendService`,
                            the loadbalancer applies any relevant `headerActions`
                            specified as part of this `backendServiceWeight`.
                          x-dcl-references:
                          - resource: Compute/BackendBucket
                            field: selfLink
                          - resource: Compute/BackendService
                            field: selfLink
                        headerAction:
                          type: object
                          x-dcl-go-name: HeaderAction
                          x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderAction
                          description: |-
                            Specifies changes to request and response headers that need to take effect for the selected `backendService`.

                            `headerAction` specified here take effect before `headerAction` in the enclosing `HttpRouteRule`, `PathMatcher` and `UrlMap`.
                          properties:
                            requestHeadersToAdd:
                              type: array
                              x-dcl-go-name: RequestHeadersToAdd
                              description: Headers to add to a matching request prior
                                to forwarding the request to the `backendService`.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: object
                                x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd
                                properties:
                                  headerName:
                                    type: string
                                    x-dcl-go-name: HeaderName
                                    description: The name of the header.
                                  headerValue:
                                    type: string
                                    x-dcl-go-name: HeaderValue
                                    description: The value of the header to add.
                                  replace:
                                    type: boolean
                                    x-dcl-go-name: Replace
                                    description: |-
                                      If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                      The default value is false.
                            requestHeadersToRemove:
                              type: array
                              x-dcl-go-name: RequestHeadersToRemove
                              description: A list of header names for headers that
                                need to be removed from the request prior to forwarding
                                the request to the `backendService`.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            responseHeadersToAdd:
                              type: array
                              x-dcl-go-name: ResponseHeadersToAdd
                              description: Headers to add the response prior to sending
                                the response back to the client.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: object
                                x-dcl-go-type: UrlMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd
                                properties:
                                  headerName:
                                    type: string
                                    x-dcl-go-name: HeaderName
                                    description: The name of the header.
                                  headerValue:
                                    type: string
                                    x-dcl-go-name: HeaderValue
                                    description: The value of the header to add.
                                  replace:
                                    type: boolean
                                    x-dcl-go-name: Replace
                                    description: |-
                                      If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                      The default value is false.
                            responseHeadersToRemove:
                              type: array
                              x-dcl-go-name: ResponseHeadersToRemove
                              description: A list of header names for headers that
                                need to be removed from the response prior to sending
                                the response back to the client.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                        weight:
                          type: integer
                          format: int64
                          x-dcl-go-name: Weight
                          description: |-
                            Specifies the fraction of traffic sent to backendService, computed as `weight / (sum of all weightedBackendService weights in routeAction)` .

                            The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a `backendService`, subsequent requests will be sent to the same `backendService` as determined by the `BackendService`'s session affinity policy.

                            The value must be between 0 and 1000
              defaultService:
                type: string
                x-dcl-go-name: DefaultService
                description: |-
                  The full or partial URL to the BackendService resource. This will be used if none of the `pathRule`s or `routeRule`s defined by this PathMatcher are matched. For example, the following are all valid URLs to a BackendService resource:

                  *   `https://www.googleapis.com/compute/v1/projects/project/global/backendServices/backendService`
                  *   `compute/v1/projects/project/global/backendServices/backendService`
                  *   `global/backendServices/backendService`

                  If `defaultRouteAction` is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if `defaultService` is specified, `defaultRouteAction` cannot contain any `weightedBackendService`s. Conversely, if `defaultRouteAction` specifies any `weightedBackendService`s, `defaultService` must not be specified.

                  Only one of `defaultService`, `defaultUrlRedirect` or `defaultRouteAction.weightedBackendService` must be set.

                  Authorization requires one or more of the following [Google IAM](https://cloud.google.com/iam) permissions on the specified resource default_service:

                  *   compute.backendBuckets.use
                  *   compute.backendServices.use
              defaultUrlRedirect:
                type: object
                x-dcl-go-name: DefaultUrlRedirect
                x-dcl-go-type: UrlMapPathMatcherDefaultUrlRedirect
                description: |-
                  When none of the specified `pathRule`s or `routeRule`s match, the request is redirected to a URL specified by `defaultUrlRedirect`.

                  If `defaultUrlRedirect` is specified, `defaultService` or `defaultRouteAction` must not be set.
                properties:
                  hostRedirect:
                    type: string
                    x-dcl-go-name: HostRedirect
                    description: |-
                      The host that will be used in the redirect response instead of the one that was supplied in the request.

                      The value must be between 1 and 255 characters.
                  httpsRedirect:
                    type: boolean
                    x-dcl-go-name: HttpsRedirect
                    description: |-
                      If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request.

                      This must only be set for `UrlMap`s used in `TargetHttpProxy`s. Setting this true for `TargetHttpsProxy` is not permitted.

                      The default is set to false.
                  pathRedirect:
                    type: string
                    x-dcl-go-name: PathRedirect
                    description: |-
                      The path that will be used in the redirect response instead of the one that was supplied in the request.

                      `pathRedirect` cannot be supplied together with `prefixRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                      The value must be between 1 and 1024 characters.
                  prefixRedirect:
                    type: string
                    x-dcl-go-name: PrefixRedirect
                    description: |-
                      The prefix that replaces the `prefixMatch` specified in the `HttpRouteRuleMatch`, retaining the remaining portion of the URL before redirecting the request.

                      `prefixRedirect` cannot be supplied together with `pathRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                      The value must be between 1 and 1024 characters.
                  redirectResponseCode:
                    type: string
                    x-dcl-go-name: RedirectResponseCode
                    x-dcl-go-type: UrlMapPathMatcherDefaultUrlRedirectRedirectResponseCodeEnum
                    description: |-
                      The HTTP Status code to use for this RedirectAction.

                      Supported values are:

                      *   MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
                      *   FOUND, which corresponds to 302.
                      *   SEE_OTHER which corresponds to 303.
                      *   TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
                      *   PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
                    enum:
                    - MOVED_PERMANENTLY_DEFAULT
                    - FOUND
                    - SEE_OTHER
                    - TEMPORARY_REDIRECT
                    - PERMANENT_REDIRECT
                  stripQuery:
                    type: boolean
                    x-dcl-go-name: StripQuery
                    description: |-
                      If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained.

                      The default is set to false.
              description:
                type: string
                x-dcl-go-name: Description
                description: An optional description of this resource. Provide this
                  property when you create the resource.
              headerAction:
                type: object
                x-dcl-go-name: HeaderAction
                x-dcl-go-type: UrlMapPathMatcherHeaderAction
                description: |-
                  Specifies changes to request and response headers that need to take effect for the selected backendService.

                  HeaderAction specified here are applied after the matching `HttpRouteRule` `HeaderAction` and before the `HeaderAction` in the `UrlMap`
                properties:
                  requestHeadersToAdd:
                    type: array
                    x-dcl-go-name: RequestHeadersToAdd
                    description: Headers to add to a matching request prior to forwarding
                      the request to the `backendService`.
                    x-dcl-send-empty: true
                    x-dcl-list-type: list
                    items:
                      type: object
                      x-dcl-go-type: UrlMapPathMatcherHeaderActionRequestHeadersToAdd
                      properties:
                        headerName:
                          type: string
                          x-dcl-go-name: HeaderName
                          description: The name of the header.
                        headerValue:
                          type: string
                          x-dcl-go-name: HeaderValue
                          description: The value of the header to add.
                        replace:
                          type: boolean
                          x-dcl-go-name: Replace
                          description: |-
                            If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                            The default value is false.
                  requestHeadersToRemove:
                    type: array
                    x-dcl-go-name: RequestHeadersToRemove
                    description: A list of header names for headers that need to be
                      removed from the request prior to forwarding the request to
                      the `backendService`.
                    x-dcl-send-empty: true
                    x-dcl-list-type: list
                    items:
                      type: string
                      x-dcl-go-type: string
                  responseHeadersToAdd:
                    type: array
                    x-dcl-go-name: ResponseHeadersToAdd
                    description: Headers to add the response prior to sending the
                      response back to the client.
                    x-dcl-send-empty: true
                    x-dcl-list-type: list
                    items:
                      type: object
                      x-dcl-go-type: UrlMapPathMatcherHeaderActionResponseHeadersToAdd
                      properties:
                        headerName:
                          type: string
                          x-dcl-go-name: HeaderName
                          description: The name of the header.
                        headerValue:
                          type: string
                          x-dcl-go-name: HeaderValue
                          description: The value of the header to add.
                        replace:
                          type: boolean
                          x-dcl-go-name: Replace
                          description: |-
                            If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                            The default value is false.
                  responseHeadersToRemove:
                    type: array
                    x-dcl-go-name: ResponseHeadersToRemove
                    description: A list of header names for headers that need to be
                      removed from the response prior to sending the response back
                      to the client.
                    x-dcl-send-empty: true
                    x-dcl-list-type: list
                    items:
                      type: string
                      x-dcl-go-type: string
              name:
                type: string
                x-dcl-go-name: Name
                description: The name to which this PathMatcher is referred by the
                  HostRule.
              pathRule:
                type: array
                x-dcl-go-name: PathRule
                description: |-
                  The list of path rules. Use this list instead of `routeRules` when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis.

                  For example: a `pathRule` with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list.

                  Within a given `pathMatcher`, only one of `pathRules` or routeRules must be set.
                x-dcl-send-empty: true
                x-dcl-list-type: list
                items:
                  type: object
                  x-dcl-go-type: UrlMapPathMatcherPathRule
                  properties:
                    backendService:
                      type: string
                      x-dcl-go-name: BackendService
                      description: |-
                        The full or partial URL of the backend service resource to which traffic is directed if this rule is matched. If `routeAction` is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if `service` is specified, `routeAction` cannot contain any `weightedBackendService` s. Conversely, if `routeAction` specifies any `weightedBackendService`s, `service` must not be specified.

                        Only one of `urlRedirect`, `service` or `routeAction.weightedBackendService` must be set.
                    path:
                      type: array
                      x-dcl-go-name: Path
                      description: The list of path patterns to match. Each must start
                        with `/` and the only place a `*` is allowed is at the end
                        following a `/`. The string fed to the path matcher does not
                        include any text after the first `?` or `#`, and those chars
                        are not allowed here.
                      x-dcl-send-empty: true
                      x-dcl-list-type: list
                      items:
                        type: string
                        x-dcl-go-type: string
                    routeAction:
                      type: object
                      x-dcl-go-name: RouteAction
                      x-dcl-go-type: UrlMapPathMatcherPathRuleRouteAction
                      description: |-
                        In response to a matching `path`, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If `routeAction` specifies any `weightedBackendService`s, `service` must not be set. Conversely if `service` is set, `routeAction` cannot contain any weightedBackendServices.

                        Only one of `routeAction` or `urlRedirect` must be set.
                      properties:
                        corsPolicy:
                          type: object
                          x-dcl-go-name: CorsPolicy
                          x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionCorsPolicy
                          description: The specification for allowing client side
                            cross-origin requests. Please see [W3C Recommendation
                            for Cross Origin Resource Sharing](https://www.w3.org/TR/cors/)
                          properties:
                            allowCredentials:
                              type: boolean
                              x-dcl-go-name: AllowCredentials
                              description: |-
                                In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the `Access-Control-Allow-Credentials` header.

                                Default is false.
                            allowHeader:
                              type: array
                              x-dcl-go-name: AllowHeader
                              description: Specifies the content for the `Access-Control-Allow-Headers`
                                header.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            allowMethod:
                              type: array
                              x-dcl-go-name: AllowMethod
                              description: Specifies the content for the `Access-Control-Allow-Methods`
                                header.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            allowOrigin:
                              type: array
                              x-dcl-go-name: AllowOrigin
                              description: |-
                                Specifies the list of origins that will be allowed to do CORS requests.

                                An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            allowOriginRegex:
                              type: array
                              x-dcl-go-name: AllowOriginRegex
                              description: |-
                                Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see [en.cppreference.com/w/cpp/regex/ecmascript](https://en.cppreference.com/w/cpp/regex/ecmascript)

                                An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            disabled:
                              type: boolean
                              x-dcl-go-name: Disabled
                              description: If true, specifies the CORS policy is disabled.
                                The default value of false, which indicates that the
                                CORS policy is in effect.
                            exposeHeader:
                              type: array
                              x-dcl-go-name: ExposeHeader
                              description: Specifies the content for the `Access-Control-Expose-Headers`
                                header.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            maxAge:
                              type: integer
                              format: int64
                              x-dcl-go-name: MaxAge
                              description: Specifies how long results of a preflight
                                request can be cached in seconds. This translates
                                to the `Access-Control-Max-Age` header.
                        faultInjectionPolicy:
                          type: object
                          x-dcl-go-name: FaultInjectionPolicy
                          x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicy
                          description: |-
                            The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests.

                            `timeout` and `retry_policy` will be ignored by clients that are configured with a `fault_injection_policy`.
                          properties:
                            abort:
                              type: object
                              x-dcl-go-name: Abort
                              x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort
                              description: The specification for how client requests
                                are aborted as part of fault injection.
                              properties:
                                httpStatus:
                                  type: integer
                                  format: int64
                                  x-dcl-go-name: HttpStatus
                                  description: |-
                                    The HTTP status code used to abort the request.

                                    The value must be between 200 and 599 inclusive.
                                percentage:
                                  type: number
                                  format: double
                                  x-dcl-go-name: Percentage
                                  description: |-
                                    The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection.

                                    The value must be between 0.0 and 100.0 inclusive.
                            delay:
                              type: object
                              x-dcl-go-name: Delay
                              x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay
                              description: The specification for how client requests
                                are delayed as part of fault injection, before being
                                sent to a backend service.
                              properties:
                                fixedDelay:
                                  type: object
                                  x-dcl-go-name: FixedDelay
                                  x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay
                                  description: Specifies the value of the fixed delay
                                    interval.
                                  properties:
                                    nanos:
                                      type: integer
                                      format: int64
                                      x-dcl-go-name: Nanos
                                      description: Span of time that's a fraction
                                        of a second at nanosecond resolution. Durations
                                        less than one second are represented with
                                        a 0 `seconds` field and a positive `nanos`
                                        field. Must be from 0 to 999,999,999 inclusive.
                                    seconds:
                                      type: integer
                                      format: int64
                                      x-dcl-go-name: Seconds
                                      description: 'Span of time at a resolution of
                                        a second. Must be from 0 to 315,576,000,000
                                        inclusive. Note: these bounds are computed
                                        from: 60 sec/min * 60 min/hr * 24 hr/day *
                                        365.25 days/year * 10000 years'
                                percentage:
                                  type: number
                                  format: double
                                  x-dcl-go-name: Percentage
                                  description: |-
                                    The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection.

                                    The value must be between 0.0 and 100.0 inclusive.
                        requestMirrorPolicy:
                          type: object
                          x-dcl-go-name: RequestMirrorPolicy
                          x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicy
                          description: Specifies the policy on how requests intended
                            for the route's backends are shadowed to a separate mirrored
                            backend service. Loadbalancer does not wait for responses
                            from the shadow service. Prior to sending traffic to the
                            shadow service, the host / authority header is suffixed
                            with `-shadow`.
                          properties:
                            backendService:
                              type: string
                              x-dcl-go-name: BackendService
                              description: The full or partial URL to the BackendService
                                resource being mirrored to.
                        retryPolicy:
                          type: object
                          x-dcl-go-name: RetryPolicy
                          x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionRetryPolicy
                          description: Specifies the retry policy associated with
                            this route.
                          properties:
                            numRetries:
                              type: integer
                              format: int64
                              x-dcl-go-name: NumRetries
                              description: Specifies the allowed number retries. This
                                number must be > 0. If not specified, defaults to
                                1.
                            perTryTimeout:
                              type: object
                              x-dcl-go-name: PerTryTimeout
                              x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout
                              description: |-
                                Specifies a non-zero timeout per retry attempt.

                                If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route.
                              properties:
                                nanos:
                                  type: integer
                                  format: int64
                                  x-dcl-go-name: Nanos
                                  description: Span of time that's a fraction of a
                                    second at nanosecond resolution. Durations less
                                    than one second are represented with a 0 `seconds`
                                    field and a positive `nanos` field. Must be from
                                    0 to 999,999,999 inclusive.
                                seconds:
                                  type: integer
                                  format: int64
                                  x-dcl-go-name: Seconds
                                  description: 'Span of time at a resolution of a
                                    second. Must be from 0 to 315,576,000,000 inclusive.
                                    Note: these bounds are computed from: 60 sec/min
                                    * 60 min/hr * 24 hr/day * 365.25 days/year * 10000
                                    years'
                            retryCondition:
                              type: array
                              x-dcl-go-name: RetryCondition
                              description: |-
                                Specfies one or more conditions when this retry rule applies. Valid values are:

                                *   `5xx`: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout, connection failure, and refused streams.
                                *   `gateway-error`: Similar to 5xx, but only applies to response codes 502, 503 or 504.

                                *   `connect-failure`: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
                                *   `retriable-4xx`: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
                                *   `refused-stream`:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
                                *   `cancelled`Loadbalancer will retry if the gRPC status code in the response header is set to `cancelled`
                                *   `deadline-exceeded`: Loadbalancer will retry if the gRPC status code in the response header is set to `deadline-exceeded`
                                *   `resource-exhausted`: Loadbalancer will retry if the gRPC status code in the response header is set to `resource-exhausted`
                                *   `unavailable`: Loadbalancer will retry if the gRPC status code in the response header is set to `unavailable`
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                        timeout:
                          type: object
                          x-dcl-go-name: Timeout
                          x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionTimeout
                          description: |-
                            Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries.

                            If not specified, will use the largest timeout among all backend services associated with the route.
                          properties:
                            nanos:
                              type: integer
                              format: int64
                              x-dcl-go-name: Nanos
                              description: Span of time that's a fraction of a second
                                at nanosecond resolution. Durations less than one
                                second are represented with a 0 `seconds` field and
                                a positive `nanos` field. Must be from 0 to 999,999,999
                                inclusive.
                            seconds:
                              type: integer
                              format: int64
                              x-dcl-go-name: Seconds
                              description: 'Span of time at a resolution of a second.
                                Must be from 0 to 315,576,000,000 inclusive. Note:
                                these bounds are computed from: 60 sec/min * 60 min/hr
                                * 24 hr/day * 365.25 days/year * 10000 years'
                        urlRewrite:
                          type: object
                          x-dcl-go-name: UrlRewrite
                          x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionUrlRewrite
                          description: The spec to modify the URL of the request,
                            prior to forwarding the request to the matched service.
                          properties:
                            hostRewrite:
                              type: string
                              x-dcl-go-name: HostRewrite
                              description: |-
                                Prior to forwarding the request to the selected service, the request's host header is replaced with contents of `hostRewrite`.

                                The value must be between 1 and 255 characters.
                            pathPrefixRewrite:
                              type: string
                              x-dcl-go-name: PathPrefixRewrite
                              description: |-
                                Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by `pathPrefixRewrite`.

                                The value must be between 1 and 1024 characters.
                        weightedBackendService:
                          type: array
                          x-dcl-go-name: WeightedBackendService
                          description: |-
                            A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding `backend service`. If all traffic needs to go to a single backend service, there must be one `weightedBackendService` with weight set to a non 0 number.

                            Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this `HttpRouteAction`.
                          x-dcl-send-empty: true
                          x-dcl-list-type: list
                          items:
                            type: object
                            x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionWeightedBackendService
                            properties:
                              backendService:
                                type: string
                                x-dcl-go-name: BackendService
                                description: The full or partial URL to the default
                                  BackendService resource. Before forwarding the request
                                  to `backendService`, the loadbalancer applies any
                                  relevant `headerActions` specified as part of this
                                  `backendServiceWeight`.
                              headerAction:
                                type: object
                                x-dcl-go-name: HeaderAction
                                x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction
                                description: |-
                                  Specifies changes to request and response headers that need to take effect for the selected `backendService`.

                                  `headerAction` specified here take effect before `headerAction` in the enclosing `HttpRouteRule`, `PathMatcher` and `UrlMap`.
                                properties:
                                  requestHeadersToAdd:
                                    type: array
                                    x-dcl-go-name: RequestHeadersToAdd
                                    description: Headers to add to a matching request
                                      prior to forwarding the request to the `backendService`.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: object
                                      x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd
                                      properties:
                                        headerName:
                                          type: string
                                          x-dcl-go-name: HeaderName
                                          description: The name of the header.
                                        headerValue:
                                          type: string
                                          x-dcl-go-name: HeaderValue
                                          description: The value of the header to
                                            add.
                                        replace:
                                          type: boolean
                                          x-dcl-go-name: Replace
                                          description: |-
                                            If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                            The default value is false.
                                  requestHeadersToRemove:
                                    type: array
                                    x-dcl-go-name: RequestHeadersToRemove
                                    description: A list of header names for headers
                                      that need to be removed from the request prior
                                      to forwarding the request to the `backendService`.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: string
                                      x-dcl-go-type: string
                                  responseHeadersToAdd:
                                    type: array
                                    x-dcl-go-name: ResponseHeadersToAdd
                                    description: Headers to add the response prior
                                      to sending the response back to the client.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: object
                                      x-dcl-go-type: UrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd
                                      properties:
                                        headerName:
                                          type: string
                                          x-dcl-go-name: HeaderName
                                          description: The name of the header.
                                        headerValue:
                                          type: string
                                          x-dcl-go-name: HeaderValue
                                          description: The value of the header to
                                            add.
                                        replace:
                                          type: boolean
                                          x-dcl-go-name: Replace
                                          description: |-
                                            If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                            The default value is false.
                                  responseHeadersToRemove:
                                    type: array
                                    x-dcl-go-name: ResponseHeadersToRemove
                                    description: A list of header names for headers
                                      that need to be removed from the response prior
                                      to sending the response back to the client.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: string
                                      x-dcl-go-type: string
                              weight:
                                type: integer
                                format: int64
                                x-dcl-go-name: Weight
                                description: |-
                                  Specifies the fraction of traffic sent to backendService, computed as `weight / (sum of all weightedBackendService weights in routeAction)` .

                                  The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a `backendService`, subsequent requests will be sent to the same `backendService` as determined by the `BackendService`'s session affinity policy.

                                  The value must be between 0 and 1000
                    urlRedirect:
                      type: object
                      x-dcl-go-name: UrlRedirect
                      x-dcl-go-type: UrlMapPathMatcherPathRuleUrlRedirect
                      description: |-
                        When a path pattern is matched, the request is redirected to a URL specified by `urlRedirect`.

                        If `urlRedirect` is specified, `service` or `routeAction` must not be set.
                      properties:
                        hostRedirect:
                          type: string
                          x-dcl-go-name: HostRedirect
                          description: |-
                            The host that will be used in the redirect response instead of the one that was supplied in the request.

                            The value must be between 1 and 255 characters.
                        httpsRedirect:
                          type: boolean
                          x-dcl-go-name: HttpsRedirect
                          description: |-
                            If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request.

                            This must only be set for `UrlMap`s used in `TargetHttpProxy`s. Setting this true for `TargetHttpsProxy` is not permitted.

                            The default is set to false.
                        pathRedirect:
                          type: string
                          x-dcl-go-name: PathRedirect
                          description: |-
                            The path that will be used in the redirect response instead of the one that was supplied in the request.

                            `pathRedirect` cannot be supplied together with `prefixRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                            The value must be between 1 and 1024 characters.
                        prefixRedirect:
                          type: string
                          x-dcl-go-name: PrefixRedirect
                          description: |-
                            The prefix that replaces the `prefixMatch` specified in the `HttpRouteRuleMatch`, retaining the remaining portion of the URL before redirecting the request.

                            `prefixRedirect` cannot be supplied together with `pathRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                            The value must be between 1 and 1024 characters.
                        redirectResponseCode:
                          type: string
                          x-dcl-go-name: RedirectResponseCode
                          x-dcl-go-type: UrlMapPathMatcherPathRuleUrlRedirectRedirectResponseCodeEnum
                          description: |-
                            The HTTP Status code to use for this RedirectAction.

                            Supported values are:

                            *   MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
                            *   FOUND, which corresponds to 302.
                            *   SEE_OTHER which corresponds to 303.
                            *   TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
                            *   PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
                          enum:
                          - MOVED_PERMANENTLY_DEFAULT
                          - FOUND
                          - SEE_OTHER
                          - TEMPORARY_REDIRECT
                          - PERMANENT_REDIRECT
                        stripQuery:
                          type: boolean
                          x-dcl-go-name: StripQuery
                          description: |-
                            If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained.

                            The default is set to false.
              routeRule:
                type: array
                x-dcl-go-name: RouteRule
                description: |-
                  The list of HTTP route rules. Use this list instead of `pathRule`s when advanced route matching and routing actions are desired. `routeRules` are evaluated in order of priority, from the lowest to highest number.

                  Within a given `pathMatcher`, you can set only one of `pathRules` or routeRules.
                x-dcl-send-empty: true
                x-dcl-list-type: list
                items:
                  type: object
                  x-dcl-go-type: UrlMapPathMatcherRouteRule
                  properties:
                    backendService:
                      type: string
                      x-dcl-go-name: BackendService
                      description: |-
                        The full or partial URL of the backend service resource to which traffic is directed if this rule is matched. If `routeAction` is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if `service` is specified, `routeAction` cannot contain any `weightedBackendService` s. Conversely, if `routeAction` specifies any `weightedBackendService`s, `service` must not be specified.

                        Only one of `urlRedirect`, `service` or `routeAction.weightedBackendService` must be set.
                    description:
                      type: string
                      x-dcl-go-name: Description
                      description: |-
                        The short description conveying the intent of this `routeRule`.

                        The description can have a maximum length of 1024 characters.
                    headerAction:
                      type: object
                      x-dcl-go-name: HeaderAction
                      x-dcl-go-type: UrlMapPathMatcherRouteRuleHeaderAction
                      description: |-
                        Specifies changes to request and response headers that need to take effect for the selected backendService.

                        The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].routeAction.weightedBackendService.backendServiceWeightAction[].headerAction
                      properties:
                        requestHeadersToAdd:
                          type: array
                          x-dcl-go-name: RequestHeadersToAdd
                          description: Headers to add to a matching request prior
                            to forwarding the request to the `backendService`.
                          x-dcl-send-empty: true
                          x-dcl-list-type: list
                          items:
                            type: object
                            x-dcl-go-type: UrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd
                            properties:
                              headerName:
                                type: string
                                x-dcl-go-name: HeaderName
                                description: The name of the header.
                              headerValue:
                                type: string
                                x-dcl-go-name: HeaderValue
                                description: The value of the header to add.
                              replace:
                                type: boolean
                                x-dcl-go-name: Replace
                                description: |-
                                  If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                  The default value is false.
                        requestHeadersToRemove:
                          type: array
                          x-dcl-go-name: RequestHeadersToRemove
                          description: A list of header names for headers that need
                            to be removed from the request prior to forwarding the
                            request to the `backendService`.
                          x-dcl-send-empty: true
                          x-dcl-list-type: list
                          items:
                            type: string
                            x-dcl-go-type: string
                        responseHeadersToAdd:
                          type: array
                          x-dcl-go-name: ResponseHeadersToAdd
                          description: Headers to add the response prior to sending
                            the response back to the client.
                          x-dcl-send-empty: true
                          x-dcl-list-type: list
                          items:
                            type: object
                            x-dcl-go-type: UrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd
                            properties:
                              headerName:
                                type: string
                                x-dcl-go-name: HeaderName
                                description: The name of the header.
                              headerValue:
                                type: string
                                x-dcl-go-name: HeaderValue
                                description: The value of the header to add.
                              replace:
                                type: boolean
                                x-dcl-go-name: Replace
                                description: |-
                                  If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                  The default value is false.
                        responseHeadersToRemove:
                          type: array
                          x-dcl-go-name: ResponseHeadersToRemove
                          description: A list of header names for headers that need
                            to be removed from the response prior to sending the response
                            back to the client.
                          x-dcl-send-empty: true
                          x-dcl-list-type: list
                          items:
                            type: string
                            x-dcl-go-type: string
                    matchRule:
                      type: array
                      x-dcl-go-name: MatchRule
                      description: NO DESCRIPTION FOUND.
                      x-dcl-send-empty: true
                      x-dcl-list-type: list
                      items:
                        type: object
                        x-dcl-go-type: UrlMapPathMatcherRouteRuleMatchRule
                        properties:
                          fullPathMatch:
                            type: string
                            x-dcl-go-name: FullPathMatch
                            description: |-
                              For satisfying the `matchRule` condition, the path of the request must exactly match the value specified in `fullPathMatch` after removing any query parameters and anchor that may be part of the original URL.

                              `fullPathMatch` must be between 1 and 1024 characters.

                              Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
                          headerMatch:
                            type: array
                            x-dcl-go-name: HeaderMatch
                            description: Specifies a list of header match criteria,
                              all of which must match corresponding headers in the
                              request.
                            x-dcl-send-empty: true
                            x-dcl-list-type: list
                            items:
                              type: object
                              x-dcl-go-type: UrlMapPathMatcherRouteRuleMatchRuleHeaderMatch
                              properties:
                                exactMatch:
                                  type: string
                                  x-dcl-go-name: ExactMatch
                                  description: |-
                                    The value should exactly match contents of `exactMatch`.

                                    Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
                                headerName:
                                  type: string
                                  x-dcl-go-name: HeaderName
                                  description: |-
                                    The name of the HTTP header to match.

                                    For matching against the HTTP request's authority, use a headerMatch with the header name ":authority".

                                    For matching a request's method, use the headerName ":method".
                                invertMatch:
                                  type: boolean
                                  x-dcl-go-name: InvertMatch
                                  description: |-
                                    If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met.

                                    The default setting is false.
                                prefixMatch:
                                  type: string
                                  x-dcl-go-name: PrefixMatch
                                  description: |-
                                    The value of the header must start with the contents of `prefixMatch`.

                                    Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
                                presentMatch:
                                  type: boolean
                                  x-dcl-go-name: PresentMatch
                                  description: |-
                                    A header with the contents of `headerName` must exist. The match takes place whether or not the request's header has a value.

                                    Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
                                rangeMatch:
                                  type: object
                                  x-dcl-go-name: RangeMatch
                                  x-dcl-go-type: UrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch
                                  description: |-
                                    The header value must be an integer and its value must be in the range specified in `rangeMatch`. If the header does not contain an integer, number or is empty, the match fails.

                                    For example for a range [-5, 0]

                                    *   -3 will match.
                                    *   0 will not match.
                                    *   0.25 will not match.
                                    *   -3someString will not match.

                                    Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

                                    Note that rangeMatch is not supported for Loadbalancers that have their loadBalancingScheme set to `EXTERNAL`.
                                  properties:
                                    rangeEnd:
                                      type: integer
                                      format: int64
                                      x-dcl-go-name: RangeEnd
                                      description: The end of the range (exclusive)
                                        in signed long integer format.
                                    rangeStart:
                                      type: integer
                                      format: int64
                                      x-dcl-go-name: RangeStart
                                      description: The start of the range (inclusive)
                                        in signed long integer format.
                                regexMatch:
                                  type: string
                                  x-dcl-go-name: RegexMatch
                                  description: |-
                                    The value of the header must match the regular expression specified in `regexMatch`. For regular expression grammar, please see: [en.cppreference.com/w/cpp/regex/ecmascript](https://en.cppreference.com/w/cpp/regex/ecmascript)

                                    For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier.

                                    Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

                                    Note that regexMatch only applies to Loadbalancers that have their loadBalancingScheme set to `INTERNAL_SELF_MANAGED`.
                                suffixMatch:
                                  type: string
                                  x-dcl-go-name: SuffixMatch
                                  description: |-
                                    The value of the header must end with the contents of `suffixMatch`.

                                    Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
                          ignoreCase:
                            type: boolean
                            x-dcl-go-name: IgnoreCase
                            description: |-
                              Specifies that `prefixMatch` and `fullPathMatch` matches are case sensitive.

                              The default value is false.

                              ignoreCase must not be used with regexMatch.
                          metadataFilter:
                            type: array
                            x-dcl-go-name: MetadataFilter
                            description: |-
                              Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set of [xDS](https://github.com/envoyproxy/data-plane-api/blob/master/XDS_PROTOCOL.md) compliant clients. In their xDS requests to Loadbalancer, xDS clients present [node metadata](https://github.com/envoyproxy/data-plane-api/search?q=%22message+Node%22+in%3A%2Fenvoy%2Fapi%2Fv2%2Fcore%2Fbase.proto&). If a match takes place, the relevant routing configuration is made available to those proxies.

                              For each `metadataFilter` in this list, if its `filterMatchCriteria` is set to MATCH_ANY, at least one of the `filterLabel`s must match the corresponding label provided in the metadata. If its `filterMatchCriteria` is set to MATCH_ALL, then all of its `filterLabel`s must match with corresponding labels provided in the metadata.

                              `metadataFilters` specified here will be applied after those specified in `ForwardingRule` that refers to the `UrlMap` this ``HttpRouteRuleMatch `belongs to.` ``

                              ``` `` `metadataFilters` only applies to Loadbalancers that have their`` loadBalancingScheme``` set to `INTERNAL_SELF_MANAGED`.
                            x-dcl-send-empty: true
                            x-dcl-list-type: list
                            items:
                              type: object
                              x-dcl-go-type: UrlMapPathMatcherRouteRuleMatchRuleMetadataFilter
                              properties:
                                filterLabel:
                                  type: array
                                  x-dcl-go-name: FilterLabel
                                  description: |-
                                    The list of label value pairs that must match labels in the provided metadata based on `filterMatchCriteria`

                                    This list must not be empty and can have at the most 64 entries.
                                  x-dcl-send-empty: true
                                  x-dcl-list-type: list
                                  items:
                                    type: object
                                    x-dcl-go-type: UrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel
                                    properties:
                                      name:
                                        type: string
                                        x-dcl-go-name: Name
                                        description: |-
                                          Name of metadata label.

                                          The name can have a maximum length of 1024 characters and must be at least 1 character long.
                                      value:
                                        type: string
                                        x-dcl-go-name: Value
                                        description: |-
                                          The value of the label must match the specified value.

                                          value can have a maximum length of 1024 characters.
                                filterMatchCriteria:
                                  type: string
                                  x-dcl-go-name: FilterMatchCriteria
                                  x-dcl-go-type: UrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterMatchCriteriaEnum
                                  description: |-
                                    Specifies how individual `filterLabel` matches within the list of `filterLabel`s contribute towards the overall `metadataFilter` match.

                                    Supported values are:

                                    *   MATCH_ANY: At least one of the `filterLabels` must have a matching label in the provided metadata.
                                    *   MATCH_ALL: All `filterLabels` must have matching labels in the provided metadata. Possible values: NOT_SET, MATCH_ALL, MATCH_ANY
                                  enum:
                                  - NOT_SET
                                  - MATCH_ALL
                                  - MATCH_ANY
                          prefixMatch:
                            type: string
                            x-dcl-go-name: PrefixMatch
                            description: |-
                              For satisfying the `matchRule` condition, the request's path must begin with the specified `prefixMatch`. `prefixMatch` must begin with a `/`.

                              The value must be between 1 and 1024 characters.

                              Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
                          queryParameterMatch:
                            type: array
                            x-dcl-go-name: QueryParameterMatch
                            description: Specifies a list of query parameter match
                              criteria, all of which must match corresponding query
                              parameters in the request.
                            x-dcl-send-empty: true
                            x-dcl-list-type: list
                            items:
                              type: object
                              x-dcl-go-type: UrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatch
                              properties:
                                exactMatch:
                                  type: string
                                  x-dcl-go-name: ExactMatch
                                  description: |-
                                    The `queryParameterMatch` matches if the value of the parameter exactly matches the contents of `exactMatch`.

                                    Only one of presentMatch, exactMatch or regexMatch must be set.
                                name:
                                  type: string
                                  x-dcl-go-name: Name
                                  description: The name of the query parameter to
                                    match. The query parameter must exist in the request,
                                    in the absence of which the request match fails.
                                presentMatch:
                                  type: boolean
                                  x-dcl-go-name: PresentMatch
                                  description: |-
                                    Specifies that the `queryParameterMatch` matches if the request contains the query parameter, irrespective of whether the parameter has a value or not.

                                    Only one of presentMatch, exactMatch or regexMatch must be set.
                                regexMatch:
                                  type: string
                                  x-dcl-go-name: RegexMatch
                                  description: |-
                                    The `queryParameterMatch` matches if the value of the parameter matches the regular expression specified by `regexMatch`. For the regular expression grammar, please see [en.cppreference.com/w/cpp/regex/ecmascript](https://en.cppreference.com/w/cpp/regex/ecmascript)

                                    Only one of presentMatch, exactMatch or regexMatch must be set.

                                    Note that regexMatch only applies when the loadBalancingScheme is set to `INTERNAL_SELF_MANAGED`.
                          regexMatch:
                            type: string
                            x-dcl-go-name: RegexMatch
                            description: |-
                              For satisfying the `matchRule` condition, the path of the request must satisfy the regular expression specified in `regexMatch` after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see [en.cppreference.com/w/cpp/regex/ecmascript](https://en.cppreference.com/w/cpp/regex/ecmascript)

                              Only one of prefixMatch, fullPathMatch or regexMatch must be specified.

                              Note that regexMatch only applies to Loadbalancers that have their loadBalancingScheme set to `INTERNAL_SELF_MANAGED`.
                    priority:
                      type: integer
                      format: int64
                      x-dcl-go-name: Priority
                      description: |-
                        For `routeRules` within a given `pathMatcher`, priority determines the order in which load balancer will interpret `routeRules`. `RouteRules` are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied.

                        You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive.

                        Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
                    routeAction:
                      type: object
                      x-dcl-go-name: RouteAction
                      x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteAction
                      description: |-
                        In response to a matching `matchRule`, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If `routeAction` specifies any `weightedBackendService`s, `service` must not be set. Conversely if `service` is set, `routeAction` cannot contain any weightedBackendServices.

                        Only one of `urlRedirect`, `service` or `routeAction.weightedBackendService` must be set.
                      properties:
                        corsPolicy:
                          type: object
                          x-dcl-go-name: CorsPolicy
                          x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionCorsPolicy
                          description: The specification for allowing client side
                            cross-origin requests. Please see [W3C Recommendation
                            for Cross Origin Resource Sharing](https://www.w3.org/TR/cors/)
                          properties:
                            allowCredentials:
                              type: boolean
                              x-dcl-go-name: AllowCredentials
                              description: |-
                                In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the `Access-Control-Allow-Credentials` header.

                                Default is false.
                            allowHeader:
                              type: array
                              x-dcl-go-name: AllowHeader
                              description: Specifies the content for the `Access-Control-Allow-Headers`
                                header.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            allowMethod:
                              type: array
                              x-dcl-go-name: AllowMethod
                              description: Specifies the content for the `Access-Control-Allow-Methods`
                                header.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            allowOrigin:
                              type: array
                              x-dcl-go-name: AllowOrigin
                              description: |-
                                Specifies the list of origins that will be allowed to do CORS requests.

                                An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            allowOriginRegex:
                              type: array
                              x-dcl-go-name: AllowOriginRegex
                              description: |-
                                Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see [en.cppreference.com/w/cpp/regex/ecmascript](https://en.cppreference.com/w/cpp/regex/ecmascript)

                                An origin is allowed if it matches either an item in `allowOrigins` or an item in `allowOriginRegexes`.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            disabled:
                              type: boolean
                              x-dcl-go-name: Disabled
                              description: If true, specifies the CORS policy is disabled.
                                The default value of false, which indicates that the
                                CORS policy is in effect.
                            exposeHeader:
                              type: array
                              x-dcl-go-name: ExposeHeader
                              description: Specifies the content for the `Access-Control-Expose-Headers`
                                header.
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                            maxAge:
                              type: integer
                              format: int64
                              x-dcl-go-name: MaxAge
                              description: Specifies how long results of a preflight
                                request can be cached in seconds. This translates
                                to the `Access-Control-Max-Age` header.
                        faultInjectionPolicy:
                          type: object
                          x-dcl-go-name: FaultInjectionPolicy
                          x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy
                          description: |-
                            The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests.

                            `timeout` and `retry_policy` will be ignored by clients that are configured with a `fault_injection_policy`.
                          properties:
                            abort:
                              type: object
                              x-dcl-go-name: Abort
                              x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort
                              description: The specification for how client requests
                                are aborted as part of fault injection.
                              properties:
                                httpStatus:
                                  type: integer
                                  format: int64
                                  x-dcl-go-name: HttpStatus
                                  description: |-
                                    The HTTP status code used to abort the request.

                                    The value must be between 200 and 599 inclusive.
                                percentage:
                                  type: number
                                  format: double
                                  x-dcl-go-name: Percentage
                                  description: |-
                                    The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection.

                                    The value must be between 0.0 and 100.0 inclusive.
                            delay:
                              type: object
                              x-dcl-go-name: Delay
                              x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay
                              description: The specification for how client requests
                                are delayed as part of fault injection, before being
                                sent to a backend service.
                              properties:
                                fixedDelay:
                                  type: object
                                  x-dcl-go-name: FixedDelay
                                  x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay
                                  description: Specifies the value of the fixed delay
                                    interval.
                                  properties:
                                    nanos:
                                      type: integer
                                      format: int64
                                      x-dcl-go-name: Nanos
                                      description: Span of time that's a fraction
                                        of a second at nanosecond resolution. Durations
                                        less than one second are represented with
                                        a 0 `seconds` field and a positive `nanos`
                                        field. Must be from 0 to 999,999,999 inclusive.
                                    seconds:
                                      type: integer
                                      format: int64
                                      x-dcl-go-name: Seconds
                                      description: 'Span of time at a resolution of
                                        a second. Must be from 0 to 315,576,000,000
                                        inclusive. Note: these bounds are computed
                                        from: 60 sec/min * 60 min/hr * 24 hr/day *
                                        365.25 days/year * 10000 years'
                                percentage:
                                  type: number
                                  format: double
                                  x-dcl-go-name: Percentage
                                  description: |-
                                    The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection.

                                    The value must be between 0.0 and 100.0 inclusive.
                        requestMirrorPolicy:
                          type: object
                          x-dcl-go-name: RequestMirrorPolicy
                          x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy
                          description: Specifies the policy on how requests intended
                            for the route's backends are shadowed to a separate mirrored
                            backend service. Loadbalancer does not wait for responses
                            from the shadow service. Prior to sending traffic to the
                            shadow service, the host / authority header is suffixed
                            with `-shadow`.
                          properties:
                            backendService:
                              type: string
                              x-dcl-go-name: BackendService
                              description: The full or partial URL to the BackendService
                                resource being mirrored to.
                        retryPolicy:
                          type: object
                          x-dcl-go-name: RetryPolicy
                          x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionRetryPolicy
                          description: Specifies the retry policy associated with
                            this route.
                          properties:
                            numRetries:
                              type: integer
                              format: int64
                              x-dcl-go-name: NumRetries
                              description: Specifies the allowed number retries. This
                                number must be > 0. If not specified, defaults to
                                1.
                            perTryTimeout:
                              type: object
                              x-dcl-go-name: PerTryTimeout
                              x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout
                              description: |-
                                Specifies a non-zero timeout per retry attempt.

                                If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route.
                              properties:
                                nanos:
                                  type: integer
                                  format: int64
                                  x-dcl-go-name: Nanos
                                  description: Span of time that's a fraction of a
                                    second at nanosecond resolution. Durations less
                                    than one second are represented with a 0 `seconds`
                                    field and a positive `nanos` field. Must be from
                                    0 to 999,999,999 inclusive.
                                seconds:
                                  type: integer
                                  format: int64
                                  x-dcl-go-name: Seconds
                                  description: 'Span of time at a resolution of a
                                    second. Must be from 0 to 315,576,000,000 inclusive.
                                    Note: these bounds are computed from: 60 sec/min
                                    * 60 min/hr * 24 hr/day * 365.25 days/year * 10000
                                    years'
                            retryCondition:
                              type: array
                              x-dcl-go-name: RetryCondition
                              description: |-
                                Specfies one or more conditions when this retry rule applies. Valid values are:

                                *   `5xx`: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout, connection failure, and refused streams.
                                *   `gateway-error`: Similar to 5xx, but only applies to response codes 502, 503 or 504.

                                *   `connect-failure`: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
                                *   `retriable-4xx`: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
                                *   `refused-stream`:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
                                *   `cancelled`Loadbalancer will retry if the gRPC status code in the response header is set to `cancelled`
                                *   `deadline-exceeded`: Loadbalancer will retry if the gRPC status code in the response header is set to `deadline-exceeded`
                                *   `resource-exhausted`: Loadbalancer will retry if the gRPC status code in the response header is set to `resource-exhausted`
                                *   `unavailable`: Loadbalancer will retry if the gRPC status code in the response header is set to `unavailable`
                              x-dcl-send-empty: true
                              x-dcl-list-type: list
                              items:
                                type: string
                                x-dcl-go-type: string
                        timeout:
                          type: object
                          x-dcl-go-name: Timeout
                          x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionTimeout
                          description: |-
                            Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries.

                            If not specified, will use the largest timeout among all backend services associated with the route.
                          properties:
                            nanos:
                              type: integer
                              format: int64
                              x-dcl-go-name: Nanos
                              description: Span of time that's a fraction of a second
                                at nanosecond resolution. Durations less than one
                                second are represented with a 0 `seconds` field and
                                a positive `nanos` field. Must be from 0 to 999,999,999
                                inclusive.
                            seconds:
                              type: integer
                              format: int64
                              x-dcl-go-name: Seconds
                              description: 'Span of time at a resolution of a second.
                                Must be from 0 to 315,576,000,000 inclusive. Note:
                                these bounds are computed from: 60 sec/min * 60 min/hr
                                * 24 hr/day * 365.25 days/year * 10000 years'
                        urlRewrite:
                          type: object
                          x-dcl-go-name: UrlRewrite
                          x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionUrlRewrite
                          description: The spec to modify the URL of the request,
                            prior to forwarding the request to the matched service.
                          properties:
                            hostRewrite:
                              type: string
                              x-dcl-go-name: HostRewrite
                              description: |-
                                Prior to forwarding the request to the selected service, the request's host header is replaced with contents of `hostRewrite`.

                                The value must be between 1 and 255 characters.
                            pathPrefixRewrite:
                              type: string
                              x-dcl-go-name: PathPrefixRewrite
                              description: |-
                                Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by `pathPrefixRewrite`.

                                The value must be between 1 and 1024 characters.
                        weightedBackendService:
                          type: array
                          x-dcl-go-name: WeightedBackendService
                          description: |-
                            A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding `backend service`. If all traffic needs to go to a single backend service, there must be one `weightedBackendService` with weight set to a non 0 number.

                            Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this `HttpRouteAction`.
                          x-dcl-send-empty: true
                          x-dcl-list-type: list
                          items:
                            type: object
                            x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionWeightedBackendService
                            properties:
                              backendService:
                                type: string
                                x-dcl-go-name: BackendService
                                description: The full or partial URL to the default
                                  BackendService resource. Before forwarding the request
                                  to `backendService`, the loadbalancer applies any
                                  relevant `headerActions` specified as part of this
                                  `backendServiceWeight`.
                              headerAction:
                                type: object
                                x-dcl-go-name: HeaderAction
                                x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction
                                description: |-
                                  Specifies changes to request and response headers that need to take effect for the selected `backendService`.

                                  `headerAction` specified here take effect before `headerAction` in the enclosing `HttpRouteRule`, `PathMatcher` and `UrlMap`.
                                properties:
                                  requestHeadersToAdd:
                                    type: array
                                    x-dcl-go-name: RequestHeadersToAdd
                                    description: Headers to add to a matching request
                                      prior to forwarding the request to the `backendService`.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: object
                                      x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd
                                      properties:
                                        headerName:
                                          type: string
                                          x-dcl-go-name: HeaderName
                                          description: The name of the header.
                                        headerValue:
                                          type: string
                                          x-dcl-go-name: HeaderValue
                                          description: The value of the header to
                                            add.
                                        replace:
                                          type: boolean
                                          x-dcl-go-name: Replace
                                          description: |-
                                            If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                            The default value is false.
                                  requestHeadersToRemove:
                                    type: array
                                    x-dcl-go-name: RequestHeadersToRemove
                                    description: A list of header names for headers
                                      that need to be removed from the request prior
                                      to forwarding the request to the `backendService`.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: string
                                      x-dcl-go-type: string
                                  responseHeadersToAdd:
                                    type: array
                                    x-dcl-go-name: ResponseHeadersToAdd
                                    description: Headers to add the response prior
                                      to sending the response back to the client.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: object
                                      x-dcl-go-type: UrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd
                                      properties:
                                        headerName:
                                          type: string
                                          x-dcl-go-name: HeaderName
                                          description: The name of the header.
                                        headerValue:
                                          type: string
                                          x-dcl-go-name: HeaderValue
                                          description: The value of the header to
                                            add.
                                        replace:
                                          type: boolean
                                          x-dcl-go-name: Replace
                                          description: |-
                                            If false, `headerValue` is appended to any values that already exist for the header. If true, `headerValue` is set for the header, discarding any values that were set for that header.

                                            The default value is false.
                                  responseHeadersToRemove:
                                    type: array
                                    x-dcl-go-name: ResponseHeadersToRemove
                                    description: A list of header names for headers
                                      that need to be removed from the response prior
                                      to sending the response back to the client.
                                    x-dcl-send-empty: true
                                    x-dcl-list-type: list
                                    items:
                                      type: string
                                      x-dcl-go-type: string
                              weight:
                                type: integer
                                format: int64
                                x-dcl-go-name: Weight
                                description: |-
                                  Specifies the fraction of traffic sent to backendService, computed as `weight / (sum of all weightedBackendService weights in routeAction)` .

                                  The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a `backendService`, subsequent requests will be sent to the same `backendService` as determined by the `BackendService`'s session affinity policy.

                                  The value must be between 0 and 1000
                    urlRedirect:
                      type: object
                      x-dcl-go-name: UrlRedirect
                      x-dcl-go-type: UrlMapPathMatcherRouteRuleUrlRedirect
                      description: |-
                        When this rule is matched, the request is redirected to a URL specified by `urlRedirect`.

                        If `urlRedirect` is specified, `service` or `routeAction` must not be set.
                      properties:
                        hostRedirect:
                          type: string
                          x-dcl-go-name: HostRedirect
                          description: |-
                            The host that will be used in the redirect response instead of the one that was supplied in the request.

                            The value must be between 1 and 255 characters.
                        httpsRedirect:
                          type: boolean
                          x-dcl-go-name: HttpsRedirect
                          description: |-
                            If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request.

                            This must only be set for `UrlMap`s used in `TargetHttpProxy`s. Setting this true for `TargetHttpsProxy` is not permitted.

                            The default is set to false.
                        pathRedirect:
                          type: string
                          x-dcl-go-name: PathRedirect
                          description: |-
                            The path that will be used in the redirect response instead of the one that was supplied in the request.

                            `pathRedirect` cannot be supplied together with `prefixRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                            The value must be between 1 and 1024 characters.
                        prefixRedirect:
                          type: string
                          x-dcl-go-name: PrefixRedirect
                          description: |-
                            The prefix that replaces the `prefixMatch` specified in the `HttpRouteRuleMatch`, retaining the remaining portion of the URL before redirecting the request.

                            `prefixRedirect` cannot be supplied together with `pathRedirect`. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect.

                            The value must be between 1 and 1024 characters.
                        redirectResponseCode:
                          type: string
                          x-dcl-go-name: RedirectResponseCode
                          x-dcl-go-type: UrlMapPathMatcherRouteRuleUrlRedirectRedirectResponseCodeEnum
                          description: |-
                            The HTTP Status code to use for this RedirectAction.

                            Supported values are:

                            *   MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
                            *   FOUND, which corresponds to 302.
                            *   SEE_OTHER which corresponds to 303.
                            *   TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
                            *   PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
                          enum:
                          - MOVED_PERMANENTLY_DEFAULT
                          - FOUND
                          - SEE_OTHER
                          - TEMPORARY_REDIRECT
                          - PERMANENT_REDIRECT
                        stripQuery:
                          type: boolean
                          x-dcl-go-name: StripQuery
                          description: |-
                            If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained.

                            The default is set to false.
        project:
          type: string
          x-dcl-go-name: Project
          description: The project this URL Map resides in.
          x-kubernetes-immutable: true
          x-dcl-references:
          - resource: Cloudresourcemanager/Project
            field: name
            parent: true
          x-dcl-parameter: true
        region:
          type: string
          x-dcl-go-name: Region
          readOnly: true
          description: '[Output Only] URL of the region where the regional URL map
            resides. This field is not applicable to global URL maps. You must specify
            this field as part of the HTTP request URL. It is not settable as a field
            in the request body.'
          x-kubernetes-immutable: true
        selfLink:
          type: string
          x-dcl-go-name: SelfLink
          readOnly: true
          description: Server-defined URL for the resource.
          x-kubernetes-immutable: true
        test:
          type: array
          x-dcl-go-name: Test
          description: The list of expected URL mapping tests. Request to update this
            UrlMap will succeed only if all of the test cases pass. You can specify
            a maximum of 100 tests per UrlMap.
          x-dcl-send-empty: true
          x-dcl-list-type: list
          items:
            type: object
            x-dcl-go-type: UrlMapTest
            properties:
              description:
                type: string
                x-dcl-go-name: Description
                description: Description of this test case.
              expectedBackendService:
                type: string
                x-dcl-go-name: ExpectedBackendService
                description: Expected BackendService resource the given URL should
                  be mapped to.
              host:
                type: string
                x-dcl-go-name: Host
                description: Host portion of the URL.
              path:
                type: string
                x-dcl-go-name: Path
                description: Path portion of the URL.
