CMake-armcc/Drivers/CMSIS/Include/core_armv8mbl.h [742:1904]: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ } TPI_Type; /* TPI Asynchronous Clock Prescaler Register Definitions */ #define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ #define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ /* TPI Selected Pin Protocol Register Definitions */ #define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ #define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ /* TPI Formatter and Flush Status Register Definitions */ #define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ #define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ #define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ #define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ #define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ #define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ #define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ #define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ /* TPI Formatter and Flush Control Register Definitions */ #define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ #define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ #define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ #define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ #define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ #define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ /* TPI Periodic Synchronization Control Register Definitions */ #define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ #define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ /* TPI Software Lock Status Register Definitions */ #define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ #define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ #define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ #define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ #define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ #define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ /* TPI DEVID Register Definitions */ #define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ #define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ #define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ #define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ #define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ #define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ #define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ #define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ /* TPI DEVTYPE Register Definitions */ #define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ #define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ #define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ #define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ /*@}*/ /* end of group CMSIS_TPI */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) /** \ingroup CMSIS_core_register \defgroup CMSIS_MPU Memory Protection Unit (MPU) \brief Type definitions for the Memory Protection Unit (MPU) @{ */ /** \brief Structure type to access the Memory Protection Unit (MPU). */ typedef struct { __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ uint32_t RESERVED0[7U]; union { __IOM uint32_t MAIR[2]; struct { __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ }; }; } MPU_Type; #define MPU_TYPE_RALIASES 1U /* MPU Type Register Definitions */ #define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ #define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ #define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ #define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ #define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ #define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ /* MPU Control Register Definitions */ #define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ #define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ #define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ #define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ #define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ #define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ /* MPU Region Number Register Definitions */ #define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ #define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ /* MPU Region Base Address Register Definitions */ #define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ #define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ #define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ #define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ #define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ #define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ #define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ #define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ /* MPU Region Limit Address Register Definitions */ #define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ #define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ #define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ #define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ #define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ #define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ /* MPU Memory Attribute Indirection Register 0 Definitions */ #define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ #define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ #define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ #define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ #define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ #define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ #define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ #define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ /* MPU Memory Attribute Indirection Register 1 Definitions */ #define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ #define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ #define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ #define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ #define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ #define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ #define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ #define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ /*@} end of group CMSIS_MPU */ #endif #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \ingroup CMSIS_core_register \defgroup CMSIS_SAU Security Attribution Unit (SAU) \brief Type definitions for the Security Attribution Unit (SAU) @{ */ /** \brief Structure type to access the Security Attribution Unit (SAU). */ typedef struct { __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ #if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ #endif } SAU_Type; /* SAU Control Register Definitions */ #define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ #define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ #define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ #define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ /* SAU Type Register Definitions */ #define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ #define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ #if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) /* SAU Region Number Register Definitions */ #define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ #define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ /* SAU Region Base Address Register Definitions */ #define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ #define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ /* SAU Region Limit Address Register Definitions */ #define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ #define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ #define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ #define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ #define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ #define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ #endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ /*@} end of group CMSIS_SAU */ #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) \brief Type definitions for the Core Debug Registers @{ */ /** \brief Structure type to access the Core Debug Register (CoreDebug). */ typedef struct { __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ uint32_t RESERVED4[1U]; __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ } CoreDebug_Type; /* Debug Halting Control and Status Register Definitions */ #define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ #define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ #define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ #define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ #define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ #define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ #define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ #define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ #define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ #define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ #define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ #define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ #define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ #define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ #define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ #define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ #define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ #define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ #define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ #define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ #define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ #define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ #define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ #define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register Definitions */ #define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ #define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ #define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ #define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register */ #define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ #define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ #define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ #define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ #define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ #define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ /* Debug Authentication Control Register Definitions */ #define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ #define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ #define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ #define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ #define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ #define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ #define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ #define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ /* Debug Security Control and Status Register Definitions */ #define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ #define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ #define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ #define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ #define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ #define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ /*@} end of group CMSIS_CoreDebug */ /** \ingroup CMSIS_core_register \defgroup CMSIS_core_bitfield Core register bit field macros \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). @{ */ /** \brief Mask and shift a bit field value for use in a register bit range. \param[in] field Name of the register bit field. \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. \return Masked and shifted value. */ #define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) /** \brief Mask and shift a register value to extract a bit filed value. \param[in] field Name of the register bit field. \param[in] value Value of register. This parameter is interpreted as an uint32_t type. \return Masked and shifted bit field value. */ #define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) /*@} end of group CMSIS_core_bitfield */ /** \ingroup CMSIS_core_register \defgroup CMSIS_core_base Core Definitions \brief Definitions for base addresses, unions, and structures. @{ */ /* Memory mapping of Core Hardware */ #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ #endif #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ #endif #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ #endif #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /*@} */ /******************************************************************************* * Hardware Abstraction Layer Core Function Interface contains: - Core NVIC Functions - Core SysTick Functions - Core Register Access Functions ******************************************************************************/ /** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference */ /* ########################## NVIC functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_NVICFunctions NVIC Functions \brief Functions that manage interrupts and exceptions via the NVIC. @{ */ #ifdef CMSIS_NVIC_VIRTUAL #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" #endif #include CMSIS_NVIC_VIRTUAL_HEADER_FILE #else #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping #define NVIC_EnableIRQ __NVIC_EnableIRQ #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ #define NVIC_DisableIRQ __NVIC_DisableIRQ #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ #define NVIC_GetActive __NVIC_GetActive #define NVIC_SetPriority __NVIC_SetPriority #define NVIC_GetPriority __NVIC_GetPriority #define NVIC_SystemReset __NVIC_SystemReset #endif /* CMSIS_NVIC_VIRTUAL */ #ifdef CMSIS_VECTAB_VIRTUAL #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" #endif #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE #else #define NVIC_SetVector __NVIC_SetVector #define NVIC_GetVector __NVIC_GetVector #endif /* (CMSIS_VECTAB_VIRTUAL) */ #define NVIC_USER_IRQ_OFFSET 16 /* Special LR values for Secure/Non-Secure call handling and exception handling */ /* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ #define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ /* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ #define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ #define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ #define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ #define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ #else #define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ #endif /* Interrupt Priorities are WORD accessible only under Armv6-M */ /* The following MACROS handle generation of the register offset and byte masks */ #define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) #define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) #define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) #define __NVIC_SetPriorityGrouping(X) (void)(X) #define __NVIC_GetPriorityGrouping() (0U) /** \brief Enable Interrupt \details Enables a device specific interrupt in the NVIC interrupt controller. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); __COMPILER_BARRIER(); } } /** \brief Get Interrupt Enable status \details Returns a device specific interrupt enable status from the NVIC interrupt controller. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt is not enabled. \return 1 Interrupt is enabled. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Disable Interrupt \details Disables a device specific interrupt in the NVIC interrupt controller. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); __DSB(); __ISB(); } } /** \brief Get Pending Interrupt \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Pending Interrupt \details Sets the pending bit of a device specific interrupt in the NVIC pending register. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Clear Pending Interrupt \details Clears the pending bit of a device specific interrupt in the NVIC pending register. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Active Interrupt \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not active. \return 1 Interrupt status is active. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief Get Interrupt Target State \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 if interrupt is assigned to Secure \return 1 if interrupt is assigned to Non Secure \note IRQn must not be negative. */ __STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Interrupt Target State \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 if interrupt is assigned to Secure 1 if interrupt is assigned to Non Secure \note IRQn must not be negative. */ __STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Clear Interrupt Target State \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 if interrupt is assigned to Secure 1 if interrupt is assigned to Non Secure \note IRQn must not be negative. */ __STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** \brief Set Interrupt Priority \details Sets the priority of a device specific interrupt or a processor exception. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \param [in] priority Priority to set. \note The priority cannot be set for every processor exception. */ __STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) { if ((int32_t)(IRQn) >= 0) { NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } else { SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } } /** \brief Get Interrupt Priority \details Reads the priority of a device specific interrupt or a processor exception. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ __STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } else { return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } } /** \brief Encode Priority \details Encodes the priority for an interrupt with the given priority group, preemptive priority value, and subpriority value. In case of a conflict between priority grouping and available priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. \param [in] PriorityGroup Used priority group. \param [in] PreemptPriority Preemptive priority value (starting from 0). \param [in] SubPriority Subpriority value (starting from 0). \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). */ __STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) { uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ uint32_t PreemptPriorityBits; uint32_t SubPriorityBits; PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); return ( ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) ); } /** \brief Decode Priority \details Decodes an interrupt priority value with a given priority group to preemptive priority value and subpriority value. In case of a conflict between priority grouping and available priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). \param [in] PriorityGroup Used priority group. \param [out] pPreemptPriority Preemptive priority value (starting from 0). \param [out] pSubPriority Subpriority value (starting from 0). */ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) { uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ uint32_t PreemptPriorityBits; uint32_t SubPriorityBits; PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); } /** \brief Set Interrupt Vector \details Sets an interrupt vector in SRAM based interrupt vector table. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. VTOR must been relocated to SRAM before. If VTOR is not present address 0 must be mapped to SRAM. \param [in] IRQn Interrupt number \param [in] vector Address of interrupt handler function */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) uint32_t *vectors = (uint32_t *)SCB->VTOR; #else uint32_t *vectors = (uint32_t *)0x0U; #endif vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; __DSB(); } /** \brief Get Interrupt Vector \details Reads an interrupt vector from interrupt vector table. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \return Address of interrupt handler function */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) uint32_t *vectors = (uint32_t *)SCB->VTOR; #else uint32_t *vectors = (uint32_t *)0x0U; #endif return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; } /** \brief System Reset \details Initiates a system reset request to reset the MCU. */ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) { __DSB(); /* Ensure all outstanding memory accesses included buffered write are completed before reset */ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | SCB_AIRCR_SYSRESETREQ_Msk); __DSB(); /* Ensure completion of memory access */ for(;;) /* wait until reset */ { __NOP(); } } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief Enable Interrupt (non-secure) \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Interrupt Enable status (non-secure) \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt is not enabled. \return 1 Interrupt is enabled. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Disable Interrupt (non-secure) \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Pending Interrupt (non-secure) \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Pending Interrupt (non-secure) \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Clear Pending Interrupt (non-secure) \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Active Interrupt (non-secure) \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not active. \return 1 Interrupt status is active. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Interrupt Priority (non-secure) \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \param [in] priority Priority to set. \note The priority cannot be set for every non-secure processor exception. */ __STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } else { SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } } /** \brief Get Interrupt Priority (non-secure) \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ __STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } else { return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } } #endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ /*@} end of CMSIS_Core_NVICFunctions */ /* ########################## MPU functions #################################### */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #include "mpu_armv8.h" #endif /* ########################## FPU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_FpuFunctions FPU Functions \brief Function that provides FPU type. @{ */ /** \brief get FPU type \details returns the FPU type \returns - \b 0: No FPU - \b 1: Single precision FPU - \b 2: Double + Single precision FPU */ __STATIC_INLINE uint32_t SCB_GetFPUType(void) { return 0U; /* No FPU */ } /*@} end of CMSIS_Core_FpuFunctions */ /* ########################## SAU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SAUFunctions SAU Functions \brief Functions that configure the SAU. @{ */ #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief Enable SAU \details Enables the Security Attribution Unit (SAU). */ __STATIC_INLINE void TZ_SAU_Enable(void) { SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); } /** \brief Disable SAU \details Disables the Security Attribution Unit (SAU). */ __STATIC_INLINE void TZ_SAU_Disable(void) { SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); } #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /*@} end of CMSIS_Core_SAUFunctions */ /* ################################## SysTick function ############################################ */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SysTickFunctions SysTick Functions \brief Functions that configure the System. @{ */ #if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) /** \brief System Tick Configuration \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. \param [in] ticks Number of ticks between two interrupts. \return 0 Function succeeded. \return 1 Function failed. \note When the variable __Vendor_SysTickConfig is set to 1, then the function SysTick_Config is not included. In this case, the file device.h must contain a vendor-specific implementation of this function. */ __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) { if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); /* Reload value impossible */ } SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ return (0UL); /* Function successful */ } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief System Tick Configuration (non-secure) \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. \param [in] ticks Number of ticks between two interrupts. \return 0 Function succeeded. \return 1 Function failed. \note When the variable __Vendor_SysTickConfig is set to 1, then the function TZ_SysTick_Config_NS is not included. In this case, the file device.h must contain a vendor-specific implementation of this function. */ __STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) { if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); /* Reload value impossible */ } SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ return (0UL); /* Function successful */ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - CMake-armcc/Drivers/CMSIS/Include/core_cm23.h [750:1979]: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ } TPI_Type; /* TPI Asynchronous Clock Prescaler Register Definitions */ #define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ #define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ /* TPI Selected Pin Protocol Register Definitions */ #define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ #define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ /* TPI Formatter and Flush Status Register Definitions */ #define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ #define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ #define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ #define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ #define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ #define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ #define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ #define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ /* TPI Formatter and Flush Control Register Definitions */ #define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ #define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ #define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ #define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ #define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ #define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ /* TPI TRIGGER Register Definitions */ #define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ #define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ /* TPI Integration Test FIFO Test Data 0 Register Definitions */ #define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ #define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ #define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ #define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ #define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ #define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ #define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ #define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ #define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ #define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ #define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ #define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ #define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ #define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ /* TPI Integration Test ATB Control Register 2 Register Definitions */ #define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ #define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ #define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ #define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ #define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ #define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ #define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ #define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ /* TPI Integration Test FIFO Test Data 1 Register Definitions */ #define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ #define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ #define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ #define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ #define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ #define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ #define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ #define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ #define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ #define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ #define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ #define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ #define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ #define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ /* TPI Integration Test ATB Control Register 0 Definitions */ #define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ #define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ #define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ #define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ #define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ #define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ #define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ #define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ /* TPI Integration Mode Control Register Definitions */ #define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ #define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ /* TPI DEVID Register Definitions */ #define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ #define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ #define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ #define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ #define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ #define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ #define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ #define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ #define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ #define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ /* TPI DEVTYPE Register Definitions */ #define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ #define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ #define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ #define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ /*@}*/ /* end of group CMSIS_TPI */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) /** \ingroup CMSIS_core_register \defgroup CMSIS_MPU Memory Protection Unit (MPU) \brief Type definitions for the Memory Protection Unit (MPU) @{ */ /** \brief Structure type to access the Memory Protection Unit (MPU). */ typedef struct { __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ uint32_t RESERVED0[7U]; union { __IOM uint32_t MAIR[2]; struct { __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ }; }; } MPU_Type; #define MPU_TYPE_RALIASES 1U /* MPU Type Register Definitions */ #define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ #define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ #define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ #define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ #define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ #define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ /* MPU Control Register Definitions */ #define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ #define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ #define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ #define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ #define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ #define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ /* MPU Region Number Register Definitions */ #define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ #define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ /* MPU Region Base Address Register Definitions */ #define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ #define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ #define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ #define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ #define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ #define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ #define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ #define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ /* MPU Region Limit Address Register Definitions */ #define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ #define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ #define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ #define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ #define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ #define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ /* MPU Memory Attribute Indirection Register 0 Definitions */ #define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ #define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ #define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ #define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ #define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ #define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ #define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ #define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ /* MPU Memory Attribute Indirection Register 1 Definitions */ #define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ #define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ #define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ #define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ #define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ #define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ #define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ #define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ /*@} end of group CMSIS_MPU */ #endif #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \ingroup CMSIS_core_register \defgroup CMSIS_SAU Security Attribution Unit (SAU) \brief Type definitions for the Security Attribution Unit (SAU) @{ */ /** \brief Structure type to access the Security Attribution Unit (SAU). */ typedef struct { __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ #if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ #endif } SAU_Type; /* SAU Control Register Definitions */ #define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ #define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ #define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ #define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ /* SAU Type Register Definitions */ #define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ #define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ #if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) /* SAU Region Number Register Definitions */ #define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ #define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ /* SAU Region Base Address Register Definitions */ #define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ #define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ /* SAU Region Limit Address Register Definitions */ #define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ #define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ #define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ #define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ #define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ #define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ #endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ /*@} end of group CMSIS_SAU */ #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) \brief Type definitions for the Core Debug Registers @{ */ /** \brief Structure type to access the Core Debug Register (CoreDebug). */ typedef struct { __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ uint32_t RESERVED4[1U]; __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ } CoreDebug_Type; /* Debug Halting Control and Status Register Definitions */ #define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ #define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ #define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ #define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ #define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ #define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ #define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ #define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ #define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ #define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ #define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ #define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ #define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ #define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ #define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ #define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ #define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ #define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ #define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ #define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ #define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ #define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ #define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ #define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register Definitions */ #define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ #define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ #define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ #define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register */ #define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ #define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ #define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ #define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ #define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ #define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ /* Debug Authentication Control Register Definitions */ #define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ #define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ #define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ #define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ #define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ #define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ #define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ #define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ /* Debug Security Control and Status Register Definitions */ #define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ #define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ #define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ #define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ #define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ #define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ /*@} end of group CMSIS_CoreDebug */ /** \ingroup CMSIS_core_register \defgroup CMSIS_core_bitfield Core register bit field macros \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). @{ */ /** \brief Mask and shift a bit field value for use in a register bit range. \param[in] field Name of the register bit field. \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. \return Masked and shifted value. */ #define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) /** \brief Mask and shift a register value to extract a bit filed value. \param[in] field Name of the register bit field. \param[in] value Value of register. This parameter is interpreted as an uint32_t type. \return Masked and shifted bit field value. */ #define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) /*@} end of group CMSIS_core_bitfield */ /** \ingroup CMSIS_core_register \defgroup CMSIS_core_base Core Definitions \brief Definitions for base addresses, unions, and structures. @{ */ /* Memory mapping of Core Hardware */ #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ #endif #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ #endif #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ #endif #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /*@} */ /******************************************************************************* * Hardware Abstraction Layer Core Function Interface contains: - Core NVIC Functions - Core SysTick Functions - Core Register Access Functions ******************************************************************************/ /** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference */ /* ########################## NVIC functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_NVICFunctions NVIC Functions \brief Functions that manage interrupts and exceptions via the NVIC. @{ */ #ifdef CMSIS_NVIC_VIRTUAL #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" #endif #include CMSIS_NVIC_VIRTUAL_HEADER_FILE #else /*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ /*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ #define NVIC_EnableIRQ __NVIC_EnableIRQ #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ #define NVIC_DisableIRQ __NVIC_DisableIRQ #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ #define NVIC_GetActive __NVIC_GetActive #define NVIC_SetPriority __NVIC_SetPriority #define NVIC_GetPriority __NVIC_GetPriority #define NVIC_SystemReset __NVIC_SystemReset #endif /* CMSIS_NVIC_VIRTUAL */ #ifdef CMSIS_VECTAB_VIRTUAL #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" #endif #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE #else #define NVIC_SetVector __NVIC_SetVector #define NVIC_GetVector __NVIC_GetVector #endif /* (CMSIS_VECTAB_VIRTUAL) */ #define NVIC_USER_IRQ_OFFSET 16 /* Special LR values for Secure/Non-Secure call handling and exception handling */ /* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ #define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ /* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ #define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ #define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ #define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ #define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ #else #define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ #endif /* Interrupt Priorities are WORD accessible only under Armv6-M */ /* The following MACROS handle generation of the register offset and byte masks */ #define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) #define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) #define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) #define __NVIC_SetPriorityGrouping(X) (void)(X) #define __NVIC_GetPriorityGrouping() (0U) /** \brief Enable Interrupt \details Enables a device specific interrupt in the NVIC interrupt controller. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); __COMPILER_BARRIER(); } } /** \brief Get Interrupt Enable status \details Returns a device specific interrupt enable status from the NVIC interrupt controller. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt is not enabled. \return 1 Interrupt is enabled. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Disable Interrupt \details Disables a device specific interrupt in the NVIC interrupt controller. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); __DSB(); __ISB(); } } /** \brief Get Pending Interrupt \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Pending Interrupt \details Sets the pending bit of a device specific interrupt in the NVIC pending register. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Clear Pending Interrupt \details Clears the pending bit of a device specific interrupt in the NVIC pending register. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Active Interrupt \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not active. \return 1 Interrupt status is active. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief Get Interrupt Target State \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 if interrupt is assigned to Secure \return 1 if interrupt is assigned to Non Secure \note IRQn must not be negative. */ __STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Interrupt Target State \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 if interrupt is assigned to Secure 1 if interrupt is assigned to Non Secure \note IRQn must not be negative. */ __STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Clear Interrupt Target State \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 if interrupt is assigned to Secure 1 if interrupt is assigned to Non Secure \note IRQn must not be negative. */ __STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** \brief Set Interrupt Priority \details Sets the priority of a device specific interrupt or a processor exception. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \param [in] priority Priority to set. \note The priority cannot be set for every processor exception. */ __STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) { if ((int32_t)(IRQn) >= 0) { NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } else { SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } } /** \brief Get Interrupt Priority \details Reads the priority of a device specific interrupt or a processor exception. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ __STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } else { return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } } /** \brief Encode Priority \details Encodes the priority for an interrupt with the given priority group, preemptive priority value, and subpriority value. In case of a conflict between priority grouping and available priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. \param [in] PriorityGroup Used priority group. \param [in] PreemptPriority Preemptive priority value (starting from 0). \param [in] SubPriority Subpriority value (starting from 0). \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). */ __STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) { uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ uint32_t PreemptPriorityBits; uint32_t SubPriorityBits; PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); return ( ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) ); } /** \brief Decode Priority \details Decodes an interrupt priority value with a given priority group to preemptive priority value and subpriority value. In case of a conflict between priority grouping and available priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). \param [in] PriorityGroup Used priority group. \param [out] pPreemptPriority Preemptive priority value (starting from 0). \param [out] pSubPriority Subpriority value (starting from 0). */ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) { uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ uint32_t PreemptPriorityBits; uint32_t SubPriorityBits; PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); } /** \brief Set Interrupt Vector \details Sets an interrupt vector in SRAM based interrupt vector table. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. VTOR must been relocated to SRAM before. If VTOR is not present address 0 must be mapped to SRAM. \param [in] IRQn Interrupt number \param [in] vector Address of interrupt handler function */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) uint32_t *vectors = (uint32_t *)SCB->VTOR; #else uint32_t *vectors = (uint32_t *)0x0U; #endif vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; __DSB(); } /** \brief Get Interrupt Vector \details Reads an interrupt vector from interrupt vector table. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \return Address of interrupt handler function */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) uint32_t *vectors = (uint32_t *)SCB->VTOR; #else uint32_t *vectors = (uint32_t *)0x0U; #endif return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; } /** \brief System Reset \details Initiates a system reset request to reset the MCU. */ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) { __DSB(); /* Ensure all outstanding memory accesses included buffered write are completed before reset */ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | SCB_AIRCR_SYSRESETREQ_Msk); __DSB(); /* Ensure completion of memory access */ for(;;) /* wait until reset */ { __NOP(); } } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief Enable Interrupt (non-secure) \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Interrupt Enable status (non-secure) \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt is not enabled. \return 1 Interrupt is enabled. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Disable Interrupt (non-secure) \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Pending Interrupt (non-secure) \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Pending Interrupt (non-secure) \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Clear Pending Interrupt (non-secure) \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. \param [in] IRQn Device specific interrupt number. \note IRQn must not be negative. */ __STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); } } /** \brief Get Active Interrupt (non-secure) \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. \param [in] IRQn Device specific interrupt number. \return 0 Interrupt status is not active. \return 1 Interrupt status is active. \note IRQn must not be negative. */ __STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); } else { return(0U); } } /** \brief Set Interrupt Priority (non-secure) \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \param [in] priority Priority to set. \note The priority cannot be set for every non-secure processor exception. */ __STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) { if ((int32_t)(IRQn) >= 0) { NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } else { SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); } } /** \brief Get Interrupt Priority (non-secure) \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. The interrupt number can be positive to specify a device specific interrupt, or negative to specify a processor exception. \param [in] IRQn Interrupt number. \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ __STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } else { return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); } } #endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ /*@} end of CMSIS_Core_NVICFunctions */ /* ########################## MPU functions #################################### */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) #include "mpu_armv8.h" #endif /* ########################## FPU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_FpuFunctions FPU Functions \brief Function that provides FPU type. @{ */ /** \brief get FPU type \details returns the FPU type \returns - \b 0: No FPU - \b 1: Single precision FPU - \b 2: Double + Single precision FPU */ __STATIC_INLINE uint32_t SCB_GetFPUType(void) { return 0U; /* No FPU */ } /*@} end of CMSIS_Core_FpuFunctions */ /* ########################## SAU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SAUFunctions SAU Functions \brief Functions that configure the SAU. @{ */ #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief Enable SAU \details Enables the Security Attribution Unit (SAU). */ __STATIC_INLINE void TZ_SAU_Enable(void) { SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); } /** \brief Disable SAU \details Disables the Security Attribution Unit (SAU). */ __STATIC_INLINE void TZ_SAU_Disable(void) { SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); } #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /*@} end of CMSIS_Core_SAUFunctions */ /* ################################## SysTick function ############################################ */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SysTickFunctions SysTick Functions \brief Functions that configure the System. @{ */ #if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) /** \brief System Tick Configuration \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. \param [in] ticks Number of ticks between two interrupts. \return 0 Function succeeded. \return 1 Function failed. \note When the variable __Vendor_SysTickConfig is set to 1, then the function SysTick_Config is not included. In this case, the file device.h must contain a vendor-specific implementation of this function. */ __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) { if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); /* Reload value impossible */ } SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ return (0UL); /* Function successful */ } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** \brief System Tick Configuration (non-secure) \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. \param [in] ticks Number of ticks between two interrupts. \return 0 Function succeeded. \return 1 Function failed. \note When the variable __Vendor_SysTickConfig is set to 1, then the function TZ_SysTick_Config_NS is not included. In this case, the file device.h must contain a vendor-specific implementation of this function. */ __STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) { if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); /* Reload value impossible */ } SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ return (0UL); /* Function successful */ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -