charts/teamcity-operator/templates/teamcity-crd.yaml [5156:5314]:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                                    format: int32
                                    type: integer
                                type: object
                              name:
                                description: |-
                                  Name of the container specified as a DNS_LABEL.
                                  Each container in a pod must have a unique name (DNS_LABEL).
                                  Cannot be updated.
                                type: string
                              ports:
                                description: |-
                                  List of ports to expose from the container. Not specifying a port here
                                  DOES NOT prevent that port from being exposed. Any port which is
                                  listening on the default "0.0.0.0" address inside a container will be
                                  accessible from the network.
                                  Modifying this array with strategic merge patch may corrupt the data.
                                  For more information See https://github.com/kubernetes/kubernetes/issues/108255.
                                  Cannot be updated.
                                items:
                                  description: ContainerPort represents a network port
                                    in a single container.
                                  properties:
                                    containerPort:
                                      description: |-
                                        Number of port to expose on the pod's IP address.
                                        This must be a valid port number, 0 < x < 65536.
                                      format: int32
                                      type: integer
                                    hostIP:
                                      description: What host IP to bind the external
                                        port to.
                                      type: string
                                    hostPort:
                                      description: |-
                                        Number of port to expose on the host.
                                        If specified, this must be a valid port number, 0 < x < 65536.
                                        If HostNetwork is specified, this must match ContainerPort.
                                        Most containers do not need this.
                                      format: int32
                                      type: integer
                                    name:
                                      description: |-
                                        If specified, this must be an IANA_SVC_NAME and unique within the pod. Each
                                        named port in a pod must have a unique name. Name for the port that can be
                                        referred to by services.
                                      type: string
                                    protocol:
                                      default: TCP
                                      description: |-
                                        Protocol for port. Must be UDP, TCP, or SCTP.
                                        Defaults to "TCP".
                                      type: string
                                  required:
                                  - containerPort
                                  type: object
                                type: array
                                x-kubernetes-list-map-keys:
                                - containerPort
                                - protocol
                                x-kubernetes-list-type: map
                              readinessProbe:
                                description: |-
                                  Periodic probe of container service readiness.
                                  Container will be removed from service endpoints if the probe fails.
                                  Cannot be updated.
                                  More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                                properties:
                                  exec:
                                    description: Exec specifies the action to take.
                                    properties:
                                      command:
                                        description: |-
                                          Command is the command line to execute inside the container, the working directory for the
                                          command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                          not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                          a shell, you need to explicitly call out to that shell.
                                          Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                        items:
                                          type: string
                                        type: array
                                    type: object
                                  failureThreshold:
                                    description: |-
                                      Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                      Defaults to 3. Minimum value is 1.
                                    format: int32
                                    type: integer
                                  grpc:
                                    description: GRPC specifies an action involving
                                      a GRPC port.
                                    properties:
                                      port:
                                        description: Port number of the gRPC service.
                                          Number must be in the range 1 to 65535.
                                        format: int32
                                        type: integer
                                      service:
                                        description: |-
                                          Service is the name of the service to place in the gRPC HealthCheckRequest
                                          (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
  
  
                                          If this is not specified, the default behavior is defined by gRPC.
                                        type: string
                                    required:
                                    - port
                                    type: object
                                  httpGet:
                                    description: HTTPGet specifies the http request
                                      to perform.
                                    properties:
                                      host:
                                        description: |-
                                          Host name to connect to, defaults to the pod IP. You probably want to set
                                          "Host" in httpHeaders instead.
                                        type: string
                                      httpHeaders:
                                        description: Custom headers to set in the request.
                                          HTTP allows repeated headers.
                                        items:
                                          description: HTTPHeader describes a custom
                                            header to be used in HTTP probes
                                          properties:
                                            name:
                                              description: |-
                                                The header field name.
                                                This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                              type: string
                                            value:
                                              description: The header field value
                                              type: string
                                          required:
                                          - name
                                          - value
                                          type: object
                                        type: array
                                      path:
                                        description: Path to access on the HTTP server.
                                        type: string
                                      port:
                                        anyOf:
                                        - type: integer
                                        - type: string
                                        description: |-
                                          Name or number of the port to access on the container.
                                          Number must be in the range 1 to 65535.
                                          Name must be an IANA_SVC_NAME.
                                        x-kubernetes-int-or-string: true
                                      scheme:
                                        description: |-
                                          Scheme to use for connecting to the host.
                                          Defaults to HTTP.
                                        type: string
                                    required:
                                    - port
                                    type: object
                                  initialDelaySeconds:
                                    description: |-
                                      Number of seconds after the container has started before liveness probes are initiated.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



config/crd/bases/jetbrains.com_teamcities.yaml [2033:2191]:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                                  format: int32
                                  type: integer
                              type: object
                            name:
                              description: |-
                                Name of the container specified as a DNS_LABEL.
                                Each container in a pod must have a unique name (DNS_LABEL).
                                Cannot be updated.
                              type: string
                            ports:
                              description: |-
                                List of ports to expose from the container. Not specifying a port here
                                DOES NOT prevent that port from being exposed. Any port which is
                                listening on the default "0.0.0.0" address inside a container will be
                                accessible from the network.
                                Modifying this array with strategic merge patch may corrupt the data.
                                For more information See https://github.com/kubernetes/kubernetes/issues/108255.
                                Cannot be updated.
                              items:
                                description: ContainerPort represents a network port
                                  in a single container.
                                properties:
                                  containerPort:
                                    description: |-
                                      Number of port to expose on the pod's IP address.
                                      This must be a valid port number, 0 < x < 65536.
                                    format: int32
                                    type: integer
                                  hostIP:
                                    description: What host IP to bind the external
                                      port to.
                                    type: string
                                  hostPort:
                                    description: |-
                                      Number of port to expose on the host.
                                      If specified, this must be a valid port number, 0 < x < 65536.
                                      If HostNetwork is specified, this must match ContainerPort.
                                      Most containers do not need this.
                                    format: int32
                                    type: integer
                                  name:
                                    description: |-
                                      If specified, this must be an IANA_SVC_NAME and unique within the pod. Each
                                      named port in a pod must have a unique name. Name for the port that can be
                                      referred to by services.
                                    type: string
                                  protocol:
                                    default: TCP
                                    description: |-
                                      Protocol for port. Must be UDP, TCP, or SCTP.
                                      Defaults to "TCP".
                                    type: string
                                required:
                                - containerPort
                                type: object
                              type: array
                              x-kubernetes-list-map-keys:
                              - containerPort
                              - protocol
                              x-kubernetes-list-type: map
                            readinessProbe:
                              description: |-
                                Periodic probe of container service readiness.
                                Container will be removed from service endpoints if the probe fails.
                                Cannot be updated.
                                More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
                              properties:
                                exec:
                                  description: Exec specifies the action to take.
                                  properties:
                                    command:
                                      description: |-
                                        Command is the command line to execute inside the container, the working directory for the
                                        command  is root ('/') in the container's filesystem. The command is simply exec'd, it is
                                        not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use
                                        a shell, you need to explicitly call out to that shell.
                                        Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
                                      items:
                                        type: string
                                      type: array
                                  type: object
                                failureThreshold:
                                  description: |-
                                    Minimum consecutive failures for the probe to be considered failed after having succeeded.
                                    Defaults to 3. Minimum value is 1.
                                  format: int32
                                  type: integer
                                grpc:
                                  description: GRPC specifies an action involving
                                    a GRPC port.
                                  properties:
                                    port:
                                      description: Port number of the gRPC service.
                                        Number must be in the range 1 to 65535.
                                      format: int32
                                      type: integer
                                    service:
                                      description: |-
                                        Service is the name of the service to place in the gRPC HealthCheckRequest
                                        (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).


                                        If this is not specified, the default behavior is defined by gRPC.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                httpGet:
                                  description: HTTPGet specifies the http request
                                    to perform.
                                  properties:
                                    host:
                                      description: |-
                                        Host name to connect to, defaults to the pod IP. You probably want to set
                                        "Host" in httpHeaders instead.
                                      type: string
                                    httpHeaders:
                                      description: Custom headers to set in the request.
                                        HTTP allows repeated headers.
                                      items:
                                        description: HTTPHeader describes a custom
                                          header to be used in HTTP probes
                                        properties:
                                          name:
                                            description: |-
                                              The header field name.
                                              This will be canonicalized upon output, so case-variant names will be understood as the same header.
                                            type: string
                                          value:
                                            description: The header field value
                                            type: string
                                        required:
                                        - name
                                        - value
                                        type: object
                                      type: array
                                    path:
                                      description: Path to access on the HTTP server.
                                      type: string
                                    port:
                                      anyOf:
                                      - type: integer
                                      - type: string
                                      description: |-
                                        Name or number of the port to access on the container.
                                        Number must be in the range 1 to 65535.
                                        Name must be an IANA_SVC_NAME.
                                      x-kubernetes-int-or-string: true
                                    scheme:
                                      description: |-
                                        Scheme to use for connecting to the host.
                                        Defaults to HTTP.
                                      type: string
                                  required:
                                  - port
                                  type: object
                                initialDelaySeconds:
                                  description: |-
                                    Number of seconds after the container has started before liveness probes are initiated.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



