helm/core/values.yaml

revision: ""
global:
  enableH3: false
  enableIPv6: false
  enableProxyProtocol: false
  enableLDSCache: false
  enablePushAllMCPClusters: true
  liteMetrics: false
  xdsMaxRecvMsgSize: "104857600"
  defaultUpstreamConcurrencyThreshold: 10000
  enableSRDS: true
  # -- Whether to enable Redis(redis-stack-server) for Higress, default is false.
  enableRedis: false
  onDemandRDS: false
  hostRDSMergeSubset: false
  onlyPushRouteCluster: true
  # -- IngressClass filters which ingress resources the higress controller watches.
  # The default ingress class is higress.
  # There are some special cases for special ingress class.
  # 1. When the ingress class is set as nginx, the higress controller will watch ingress
  # resources with the nginx ingress class or without any ingress class.
  # 2. When the ingress class is set empty, the higress controller will watch all ingress
  # resources in the k8s cluster.
  ingressClass: "higress"
  # -- If not empty, Higress Controller will only watch resources in the specified namespace.
  # When isolating different business systems using K8s namespace,
  # if each namespace requires a standalone gateway instance,
  # this parameter can be used to confine the Ingress watching of Higress within the given namespace.
  watchNamespace: ""
  # -- Whether to disable HTTP/2 in ALPN
  disableAlpnH2: false
  # -- If true, Higress Controller will update the status field of Ingress resources.
  # When migrating from Nginx Ingress, in order to avoid status field of Ingress objects being overwritten,
  # this parameter needs to be set to false,
  # so Higress won't write the entry IP to the status field of the corresponding Ingress object.
  enableStatus: true
  # -- whether to use autoscaling/v2 template for HPA settings
  # for internal usage only, not to be configured by users.
  autoscalingv2API: true
  # -- When deploying to a local cluster (e.g.: kind cluster), set this to true.
  local: false
  kind: false # Deprecated. Please use "global.local" instead. Will be removed later.
  # -- If true, Higress Controller will monitor istio resources as well
  enableIstioAPI: true
  # -- If true, Higress Controller will monitor Gateway API resources as well
  enableGatewayAPI: false
  # -- Used to locate istiod.
  istioNamespace: istio-system
  # -- enable pod disruption budget for the control plane, which is used to
  # ensure Istio control plane components are gradually upgraded or recovered.
  defaultPodDisruptionBudget:
    enabled: false
    # The values aren't mutable due to a current PodDisruptionBudget limitation
    # minAvailable: 1

  # -- A minimal set of requested resources to applied to all deployments so that
  # Horizontal Pod Autoscaler will be able to function (if set).
  # Each component can overwrite these default values by adding its own resources
  # block in the relevant section below and setting the desired resources values.
  defaultResources:
    requests:
      cpu: 10m
    #   memory: 128Mi
    # limits:
    #   cpu: 100m
    #   memory: 128Mi

  # -- Default hub for Istio images.
  # Releases are published to docker hub under 'istio' project.
  # Dev builds from prow are on gcr.io
  hub: higress-registry.cn-hangzhou.cr.aliyuncs.com/higress

  # -- Specify image pull policy if default behavior isn't desired.
  # Default behavior: latest images will be Always else IfNotPresent.
  imagePullPolicy: ""

  # -- ImagePullSecrets for all ServiceAccount, list of secrets in the same namespace
  # to use for pulling any images in pods that reference this ServiceAccount.
  # For components that don't use ServiceAccounts (i.e. grafana, servicegraph, tracing)
  # ImagePullSecrets will be added to the corresponding Deployment(StatefulSet) objects.
  # Must be set for any cluster configured with private docker registry.
  imagePullSecrets: []
  # - private-registry-key

  # -- Enabled by default in master for maximising testing.
  istiod:
    enableAnalysis: false

  # -- To output all istio components logs in json format by adding --log_as_json argument to each container argument
  logAsJson: false

  # -- Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>
  # The control plane has different scopes depending on component, but can configure default log level across all components
  # If empty, default scope and level will be used as configured in code
  logging:
    level: "default:info"

  omitSidecarInjectorConfigMap: false

  # -- Whether to restrict the applications namespace the controller manages;
  # If not set, controller watches all namespaces
  oneNamespace: false

  # -- Configure whether Operator manages webhook configurations. The current behavior
  # of Istiod is to manage its own webhook configurations.
  # When this option is set as true, Istio Operator, instead of webhooks, manages the
  # webhook configurations. When this option is set as false, webhooks manage their
  # own webhook configurations.
  operatorManageWebhooks: false

  # Custom DNS config for the pod to resolve names of services in other
  # clusters. Use this to add additional search domains, and other settings.
  # see
  # https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#dns-config
  # This does not apply to gateway pods as they typically need a different
  # set of DNS settings than the normal application pods (e.g., in
  # multicluster scenarios).
  # NOTE: If using templates, follow the pattern in the commented example below.
  #podDNSSearchNamespaces:
  #- global
  #- "{{ valueOrDefault .DeploymentMeta.Namespace \"default\" }}.global"

  # -- Kubernetes >=v1.11.0 will create two PriorityClass, including system-cluster-critical and
  # system-node-critical, it is better to configure this in order to make sure your Istio pods
  # will not be killed because of low priority class.
  # Refer to https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
  # for more detail.
  priorityClassName: ""

  proxy:
    image: proxyv2

    # -- This controls the 'policy' in the sidecar injector.
    autoInject: enabled

    # -- CAUTION: It is important to ensure that all Istio helm charts specify the same clusterDomain value
    # cluster domain. Default value is "cluster.local".
    clusterDomain: "cluster.local"

    # -- Per Component log level for proxy, applies to gateways and sidecars. If a component level is
    # not set, then the global "logLevel" will be used.
    componentLogLevel: "misc:error"

    # -- If set, newly injected sidecars will have core dumps enabled.
    enableCoreDump: false

    # istio ingress capture allowlist
    # examples:
    #     Redirect only selected ports:            --includeInboundPorts="80,8080"
    excludeInboundPorts: ""
    includeInboundPorts: "*"

    # -- istio egress capture allowlist
    # https://istio.io/docs/tasks/traffic-management/egress.html#calling-external-services-directly
    # example: includeIPRanges: "172.30.0.0/16,172.20.0.0/16"
    # would only capture egress traffic on those two IP Ranges, all other outbound traffic would
    # be allowed by the sidecar
    includeIPRanges: "*"
    excludeIPRanges: ""
    includeOutboundPorts: ""
    excludeOutboundPorts: ""

    # -- Log level for proxy, applies to gateways and sidecars.
    # Expected values are: trace|debug|info|warning|error|critical|off
    logLevel: warning

    # -- If set to true, istio-proxy container will have privileged securityContext
    privileged: false

    # -- The number of successive failed probes before indicating readiness failure.
    readinessFailureThreshold: 30

    # -- The number of successive successed probes before indicating readiness success.
    readinessSuccessThreshold: 30

    # -- The initial delay for readiness probes in seconds.
    readinessInitialDelaySeconds: 1

    # -- The period between readiness probes.
    readinessPeriodSeconds: 2

    # -- The readiness timeout seconds
    readinessTimeoutSeconds: 3

    # -- Resources for the sidecar.
    resources:
      requests:
        cpu: 100m
        memory: 128Mi
      limits:
        cpu: 2000m
        memory: 1024Mi

    # -- Default port for Pilot agent health checks. A value of 0 will disable health checking.
    statusPort: 15020

    # -- Specify which tracer to use. One of: lightstep, datadog, stackdriver.
    # If using stackdriver tracer outside GCP, set env GOOGLE_APPLICATION_CREDENTIALS to the GCP credential file.
    tracer: ""

    # -- Controls if sidecar is injected at the front of the container list and blocks the start of the other containers until the proxy is ready
    holdApplicationUntilProxyStarts: false

    # -- Proxy stats name regexps matcher for inclusion
    proxyStatsMatcher:
      inclusionRegexps:
        - ".*"

  proxy_init:
    # -- Base name for the proxy_init container, used to configure iptables.
    image: proxyv2
    resources:
      limits:
        cpu: 2000m
        memory: 1024Mi
      requests:
        cpu: 10m
        memory: 10Mi

  # -- configure remote pilot and istiod service and endpoint
  remotePilotAddress: ""

  ##############################################################################################
  # The following values are found in other charts. To effectively modify these values, make   #
  # make sure they are consistent across your Istio helm charts                                #
  ##############################################################################################

  # -- The customized CA address to retrieve certificates for the pods in the cluster.
  # CSR clients such as the Istio Agent and ingress gateways can use this to specify the CA endpoint.
  # If not set explicitly, default to the Istio discovery address.
  caAddress: ""

  # -- Configure a remote cluster data plane controlled by an external istiod.
  # When set to true, istiod is not deployed locally and only a subset of the other
  # discovery charts are enabled.
  externalIstiod: false

  # -- Configure a remote cluster as the config cluster for an external istiod.
  configCluster: false

  # -- Configure the policy for validating JWT.
  # Currently, two options are supported: "third-party-jwt" and "first-party-jwt".
  jwtPolicy: "third-party-jwt"

  # Mesh ID means Mesh Identifier. It should be unique within the scope where
  # meshes will interact with each other, but it is not required to be
  # globally/universally unique. For example, if any of the following are true,
  # then two meshes must have different Mesh IDs:
  # - Meshes will have their telemetry aggregated in one place
  # - Meshes will be federated together
  # - Policy will be written referencing one mesh from the other
  #
  # If an administrator expects that any of these conditions may become true in
  # the future, they should ensure their meshes have different Mesh IDs
  # assigned.
  #
  # Within a multicluster mesh, each cluster must be (manually or auto)
  # configured to have the same Mesh ID value. If an existing cluster 'joins' a
  # multicluster mesh, it will need to be migrated to the new mesh ID. Details
  # of migration TBD, and it may be a disruptive operation to change the Mesh
  # ID post-install.
  #
  # -- If the mesh admin does not specify a value, Istio will use the value of the
  # mesh's Trust Domain. The best practice is to select a proper Trust Domain
  # value.
  meshID: ""

  # Configure the mesh networks to be used by the Split Horizon EDS.
  #
  # The following example defines two networks with different endpoints association methods.
  # For `network1` all endpoints that their IP belongs to the provided CIDR range will be
  # mapped to network1. The gateway for this network example is specified by its public IP
  # address and port.
  # The second network, `network2`, in this example is defined differently with all endpoints
  # retrieved through the specified Multi-Cluster registry being mapped to network2. The
  # gateway is also defined differently with the name of the gateway service on the remote
  # cluster. The public IP for the gateway will be determined from that remote service (only
  # LoadBalancer gateway service type is currently supported, for a NodePort type gateway service,
  # it still need to be configured manually).
  #
  # meshNetworks:
  #   network1:
  #     endpoints:
  #     - fromCidr: "192.168.0.1/24"
  #     gateways:
  #     - address: 1.1.1.1
  #       port: 80
  #   network2:
  #     endpoints:
  #     - fromRegistry: reg1
  #     gateways:
  #     - registryServiceName: istio-ingressgateway.istio-system.svc.cluster.local
  #       port: 443
  #
  meshNetworks: {}

  # -- Use the user-specified, secret volume mounted key and certs for Pilot and workloads.
  mountMtlsCerts: false

  multiCluster:
    # -- Set to true to connect two kubernetes clusters via their respective
    # ingressgateway services when pods in each cluster cannot directly
    # talk to one another. All clusters should be using Istio mTLS and must
    # have a shared root CA for this model to work.
    enabled: true
    # -- Should be set to the name of the cluster this installation will run in. This is required for sidecar injection
    # to properly label proxies
    clusterName: ""

  # -- Network defines the network this cluster belong to. This name
  # corresponds to the networks in the map of mesh networks.
  network: ""

  # -- Configure the certificate provider for control plane communication.
  # Currently, two providers are supported: "kubernetes" and "istiod".
  # As some platforms may not have kubernetes signing APIs,
  # Istiod is the default
  pilotCertProvider: istiod

  sds:
    # -- The JWT token for SDS and the aud field of such JWT. See RFC 7519, section 4.1.3.
    # When a CSR is sent from Istio Agent to the CA (e.g. Istiod), this aud is to make sure the
    # JWT is intended for the CA.
    token:
      aud: istio-ca

  sts:
    # -- The service port used by Security Token Service (STS) server to handle token exchange requests.
    # Setting this port to a non-zero value enables STS server.
    servicePort: 0

  # -- Configuration for each of the supported tracers
  tracer:
    # -- Configuration for envoy to send trace data to LightStep.
    # Disabled by default.
    # address: the <host>:<port> of the satellite pool
    # accessToken: required for sending data to the pool
    #
    datadog:
      # -- Host:Port for submitting traces to the Datadog agent.
      address: "$(HOST_IP):8126"
    lightstep:
      # -- example: lightstep-satellite:443
      address: ""
      # -- example: abcdefg1234567
      accessToken: ""
    stackdriver:
      # -- enables trace output to stdout.
      debug: false
      # -- The global default max number of message events per span.
      maxNumberOfMessageEvents: 200
      # -- The global default max number of annotation events per span.
      maxNumberOfAnnotations: 200
      # -- The global default max number of attributes per span.
      maxNumberOfAttributes: 200
  # -- Use the Mesh Control Protocol (MCP) for configuring Istiod. Requires an MCP source.
  useMCP: false

  # -- Observability (o11y) configurations
  o11y:
    enabled: false
    promtail:
      image:
        repository: higress-registry.cn-hangzhou.cr.aliyuncs.com/higress/promtail
        tag: 2.9.4
      port: 3101
      resources:
        limits:
          cpu: 500m
          memory: 2Gi
      securityContext: {}

  # -- The name of the CA for workload certificates.
  # For example, when caName=GkeWorkloadCertificate, GKE workload certificates
  # will be used as the certificates for workloads.
  # The default value is "" and when caName="", the CA will be configured by other
  # mechanisms (e.g., environmental variable CA_PROVIDER).
  caName: ""
hub: higress-registry.cn-hangzhou.cr.aliyuncs.com/higress

clusterName: ""
# -- meshConfig defines runtime configuration of components, including Istiod and istio-agent behavior
# See https://istio.io/docs/reference/config/istio.mesh.v1alpha1/ for all available options
meshConfig:
  enablePrometheusMerge: true
  # Config for the default ProxyConfig.
  # Initially using directly the proxy metadata - can also be activated using annotations
  # on the pod. This is an unsupported low-level API, pending review and decisions on
  # enabling the feature. Enabling the DNS listener is safe - and allows further testing
  # and gradual adoption by setting capture only on specific workloads. It also allows
  # VMs to use other DNS options, like dnsmasq or unbound.

  # -- The namespace to treat as the administrative root namespace for Istio configuration.
  # When processing a leaf namespace Istio will search for declarations in that namespace first
  # and if none are found it will search in the root namespace. Any matching declaration found in the root namespace
  # is processed as if it were declared in the leaf namespace.
  rootNamespace:

  # -- The trust domain corresponds to the trust root of a system
  # Refer to https://github.com/spiffe/spiffe/blob/master/standards/SPIFFE-ID.md#21-trust-domain
  trustDomain: "cluster.local"

  # TODO: the intent is to eventually have this enabled by default when security is used.
  # It is not clear if user should normally need to configure - the metadata is typically
  # used as an escape and to control testing and rollout, but it is not intended as a long-term
  # stable API.

  # What we may configure in mesh config is the ".global" - and use of other suffixes.
  # No hurry to do this in 1.6, we're trying to prove the code.

gateway:
  name: "higress-gateway"
  # -- Number of Higress Gateway pods
  replicas: 2
  image: gateway

  # -- Use a `DaemonSet` or `Deployment`
  kind: Deployment

  # -- The number of successive failed probes before indicating readiness failure.
  readinessFailureThreshold: 30

  # -- The number of successive successed probes before indicating readiness success.
  readinessSuccessThreshold: 1

  # -- The initial delay for readiness probes in seconds.
  readinessInitialDelaySeconds: 1

  # -- The period between readiness probes.
  readinessPeriodSeconds: 2

  # -- The readiness timeout seconds
  readinessTimeoutSeconds: 3

  hub: higress-registry.cn-hangzhou.cr.aliyuncs.com/higress
  tag: ""
  # -- revision declares which revision this gateway is a part of
  revision: ""

  rbac:
    # -- If enabled, roles will be created to enable accessing certificates from Gateways. This is not needed
    # when using http://gateway-api.org/.
    enabled: true

  serviceAccount:
    # -- If set, a service account will be created. Otherwise, the default is used
    create: true
    # -- Annotations to add to the service account
    annotations: {}
    # -- The name of the service account to use.
    # If not set, the release name is used
    name: ""

  # -- Pod environment variables
  env: {}
  httpPort: 80
  httpsPort: 443
  hostNetwork: false

  # -- Labels to apply to all resources
  labels: {}

  # -- Annotations to apply to all resources
  annotations: {}

  podAnnotations:
    prometheus.io/port: "15020"
    prometheus.io/scrape: "true"
    prometheus.io/path: "/stats/prometheus"
    sidecar.istio.io/inject: "false"

  # -- Labels to apply to the pod
  podLabels: {}

  # -- Define the security context for the pod.
  # If unset, this will be automatically set to the minimum privileges required to bind to port 80 and 443.
  # On Kubernetes 1.22+, this only requires the `net.ipv4.ip_unprivileged_port_start` sysctl.
  securityContext: ~
  containerSecurityContext: ~
  unprivilegedPortSupported: ~

  service:
    # -- Type of service. Set to "None" to disable the service entirely
    type: LoadBalancer
    ports:
      - name: http2
        port: 80
        protocol: TCP
        targetPort: 80
      - name: https
        port: 443
        protocol: TCP
        targetPort: 443
    annotations: {}
    loadBalancerIP: ""
    loadBalancerClass: ""
    loadBalancerSourceRanges: []
    externalTrafficPolicy: ""

  rollingMaxSurge: 100%
  # -- If global.local is true, the default value is 100%, otherwise it is 25%
  rollingMaxUnavailable: 25%

  resources:
    requests:
      cpu: 2000m
      memory: 2048Mi
    limits:
      cpu: 2000m
      memory: 2048Mi

  autoscaling:
    enabled: false
    minReplicas: 1
    maxReplicas: 5
    targetCPUUtilizationPercentage: 80

  nodeSelector: {}

  tolerations: []

  affinity: {}

  # -- If specified, the gateway will act as a network gateway for the given network.
  networkGateway: ""

  metrics:
    # -- If true, create PodMonitor or VMPodScrape for gateway
    enabled: false
    # -- provider group name for CustomResourceDefinition, can be monitoring.coreos.com or operator.victoriametrics.com
    provider: monitoring.coreos.com
    interval: ""
    scrapeTimeout: ""
    honorLabels: false
    # -- for monitoring.coreos.com/v1.PodMonitor
    metricRelabelings: []
    relabelings: []
    # -- for operator.victoriametrics.com/v1beta1.VMPodScrape
    metricRelabelConfigs: []
    relabelConfigs: []
    # -- some more raw podMetricsEndpoints spec
    rawSpec: {}

controller:
  name: "higress-controller"
  # -- Number of Higress Controller pods
  replicas: 1
  image: higress

  hub: higress-registry.cn-hangzhou.cr.aliyuncs.com/higress
  tag: ""
  env: {}

  labels: {}

  probe:
    httpGet:
      path: /ready
      port: 8888
    initialDelaySeconds: 1
    periodSeconds: 3
    timeoutSeconds: 5

  imagePullSecrets: []

  rbac:
    create: true

  serviceAccount:
    # -- Specifies whether a service account should be created
    create: true
    # -- Annotations to add to the service account
    annotations: {}
    # -- The name of the service account to use.
    # -- If not set and create is true, a name is generated using the fullname template
    name: ""

  podAnnotations: {}

  # -- Labels to apply to the pod
  podLabels: {}

  podSecurityContext:
    {}
  # fsGroup: 2000

  ports:
    - name: http
      protocol: TCP
      port: 8888
      targetPort: 8888
    - name: http-solver
      protocol: TCP
      port: 8889
      targetPort: 8889
    - name: grpc
      protocol: TCP
      port: 15051
      targetPort: 15051

  service:
    type: ClusterIP

  securityContext:
    {}
    # capabilities:
    #   drop:
    #   - ALL
  # readOnlyRootFilesystem: true
  # runAsNonRoot: true
  # runAsUser: 1000

  resources:
    requests:
      cpu: 500m
      memory: 2048Mi
    limits:
      cpu: 1000m
      memory: 2048Mi

  nodeSelector: {}

  tolerations: []

  affinity: {}

  autoscaling:
    enabled: false
    minReplicas: 1
    maxReplicas: 5
    targetCPUUtilizationPercentage: 80
  automaticHttps:
    enabled: true
    email: ""

## -- Discovery Settings
pilot:
  autoscaleEnabled: false
  autoscaleMin: 1
  autoscaleMax: 5
  replicaCount: 1
  rollingMaxSurge: 100%
  rollingMaxUnavailable: 25%

  hub: higress-registry.cn-hangzhou.cr.aliyuncs.com/higress
  tag: ""

  # -- Can be a full hub/image:tag
  image: pilot
  traceSampling: 1.0

  # -- Resources for a small pilot install
  resources:
    requests:
      cpu: 500m
      memory: 2048Mi

  env:
    PILOT_SCOPE_GATEWAY_TO_NAMESPACE: "false"
    PILOT_ENABLE_METADATA_EXCHANGE: "false"
    PILOT_ENABLE_CROSS_CLUSTER_WORKLOAD_ENTRY: "false"
    VALIDATION_ENABLED: "false"

  cpu:
    targetAverageUtilization: 80

  # -- if protocol sniffing is enabled for outbound
  enableProtocolSniffingForOutbound: true
  # -- if protocol sniffing is enabled for inbound
  enableProtocolSniffingForInbound: true

  nodeSelector: {}
  podAnnotations: {}
  serviceAnnotations: {}

  # -- You can use jwksResolverExtraRootCA to provide a root certificate
  # in PEM format. This will then be trusted by pilot when resolving
  # JWKS URIs.
  jwksResolverExtraRootCA: ""

  # -- This is used to set the source of configuration for
  # the associated address in configSource, if nothing is specified
  # the default MCP is assumed.
  configSource:
    subscribedResources: []

  plugins: []

  # -- The following is used to limit how long a sidecar can be connected
  # to a pilot. It balances out load across pilot instances at the cost of
  # increasing system churn.
  keepaliveMaxServerConnectionAge: 30m

  # -- Additional labels to apply to the deployment.
  deploymentLabels: {}

  ## Mesh config settings

  # -- Install the mesh config map, generated from values.yaml.
  # If false, pilot wil use default values (by default) or user-supplied values.
  configMap: true

  # -- Additional labels to apply on the pod level for monitoring and logging configuration.
  podLabels: {}

# Tracing config settings
tracing:
  enable: false
  sampling: 100
  timeout: 500
  skywalking:
    # access_token: ""
    service: ""
    port: 11800
  # zipkin:
  # service: ""
  # port: 9411

# -- Downstream config settings
downstream:
  idleTimeout: 180
  maxRequestHeadersKb: 60
  connectionBufferLimits: 32768
  http2:
    maxConcurrentStreams: 100
    initialStreamWindowSize: 65535
    initialConnectionWindowSize: 1048576
  routeTimeout: 0

# -- Upstream config settings
upstream:
  idleTimeout: 10
  connectionBufferLimits: 10485760

redis:
  redis:
    name: redis-stack-server
    # -- Specify the image
    image: "redis-stack-server"
    # -- Specify the tag
    tag: "7.4.0-v3"
    # -- Specify the number of replicas
    replicas: 1
    # -- Specify the password, if not set, no password is used
    password: ""
    # -- Service parameters
    service:
      # -- Exporter service type
      type: ClusterIP
      # -- Exporter service port
      port: 6379
    # -- Specify the resources
    resources: {}
    # -- NodeSelector Node labels for Redis
    nodeSelector: {}
    # -- Tolerations for Redis
    tolerations: []
    # -- Affinity for Redis
    affinity: {}
    persistence:
      # -- Enable persistence on Redis, default is false
      enabled: false
      # -- If defined, storageClassName: <storageClass>
      # -- If undefined (the default) or set to null, no storageClassName spec is set, choosing the default provisioner
      storageClass: ""
      # -- Persistent Volume access modes
      accessModes:
        - ReadWriteOnce
      # -- Persistent Volume size
      size: 1Gi