charts/opensearch/ci/ci-ingress-class-name-values.yaml [18:342]:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
minimumMasterNodes: 1

# if not set, falls back to parsing .Values.imageTag, then .Chart.appVersion.
majorVersion: ""

global:
  # Set if you want to change the default docker registry, e.g. a private one.
  dockerRegistry: ""

# Allows you to add any config files in {{ .Values.opensearchHome }}/config
opensearchHome: /usr/share/opensearch
# such as opensearch.yml and log4j2.properties
config:
  # Values must be YAML literal style scalar / YAML multiline string.
  # <filename>: |
  #   <formatted-value(s)>
  # log4j2.properties: |
  #   status = error
  #
  #   appender.console.type = Console
  #   appender.console.name = console
  #   appender.console.layout.type = PatternLayout
  #   appender.console.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] [%node_name]%marker %m%n
  #
  #   rootLogger.level = info
  #   rootLogger.appenderRef.console.ref = console
  opensearch.yml: |
    cluster.name: opensearch-cluster

    # Bind to all interfaces because we don't know what IP address Docker will assign to us.
    network.host: 0.0.0.0

    # # minimum_master_nodes need to be explicitly set when bound on a public IP
    # # set to 1 to allow single node clusters
    # discovery.zen.minimum_master_nodes: 1

    # Setting network.host to a non-loopback address enables the annoying bootstrap checks. "Single-node" mode disables them again.
    # discovery.type: single-node

    # Start OpenSearch Security Demo Configuration
    # WARNING: revise all the lines below before you go into production
    plugins:
      security:
        ssl:
          transport:
            pemcert_filepath: esnode.pem
            pemkey_filepath: esnode-key.pem
            pemtrustedcas_filepath: root-ca.pem
            enforce_hostname_verification: false
          http:
            enabled: true
            pemcert_filepath: esnode.pem
            pemkey_filepath: esnode-key.pem
            pemtrustedcas_filepath: root-ca.pem
        allow_unsafe_democertificates: true
        allow_default_init_securityindex: true
        authcz:
          admin_dn:
            - CN=kirk,OU=client,O=client,L=test,C=de
        audit.type: internal_opensearch
        enable_snapshot_restore_privilege: true
        check_snapshot_restore_write_privileges: true
        restapi:
          roles_enabled: ["all_access", "security_rest_api_access"]
        system_indices:
          enabled: true
          indices:
            [
              ".opendistro-alerting-config",
              ".opendistro-alerting-alert*",
              ".opendistro-anomaly-results*",
              ".opendistro-anomaly-detector*",
              ".opendistro-anomaly-checkpoints",
              ".opendistro-anomaly-detection-state",
              ".opendistro-reports-*",
              ".opendistro-notifications-*",
              ".opendistro-notebooks",
              ".opendistro-asynchronous-search-response*",
            ]
    ######## End OpenSearch Security Demo Configuration ########
  # log4j2.properties:

# Extra environment variables to append to this nodeGroup
# This will be appended to the current 'env:' key. You can use any of the kubernetes env
# syntax here
extraEnvs: []
#  - name: MY_ENVIRONMENT_VAR
#    value: the_value_goes_here

# Allows you to load environment variables from kubernextes secret or config map
envFrom: []
# - secretRef:
#     name: env-secret
# - configMapRef:
#     name: config-map

# A list of secrets and their paths to mount inside the pod
# This is useful for mounting certificates for security and for mounting
# the X-Pack license
secretMounts: []

hostAliases: []
# - ip: "127.0.0.1"
#   hostnames:
#   - "foo.local"
#   - "bar.local"

image:
  repository: "opensearchproject/opensearch"
  # override image tag, which is .Chart.AppVersion by default
  tag: ""
  pullPolicy: "IfNotPresent"

podAnnotations: {}
  # iam.amazonaws.com/role: es-cluster

# additionals labels
labels: {}

opensearchJavaOpts: "-Xmx512M -Xms512M"

resources:
  requests:
    cpu: "1000m"
    memory: "100Mi"

initResources: {}
  # limits:
  #   cpu: "25m"
  #   # memory: "128Mi"
  # requests:
  #   cpu: "25m"
  #   memory: "128Mi"

sidecarResources: {}
  # limits:
  #   cpu: "25m"
  #   # memory: "128Mi"
  # requests:
  #   cpu: "25m"
  #   memory: "128Mi"

networkHost: "0.0.0.0"

rbac:
  create: false
  serviceAccountAnnotations: {}
  serviceAccountName: ""

podSecurityPolicy:
  create: false
  name: ""
  spec:
    privileged: true
    fsGroup:
      rule: RunAsAny
    runAsUser:
      rule: RunAsAny
    seLinux:
      rule: RunAsAny
    supplementalGroups:
      rule: RunAsAny
    volumes:
      - secret
      - configMap
      - persistentVolumeClaim
      - emptyDir

persistence:
  enabled: true
  # Set to false to disable the `fsgroup-volume` initContainer that will update permissions on the persistent disk.
  enableInitChown: true
  # override image, which is busybox by default
  # image: busybox
  # override image tag, which is latest by default
  # imageTag:
  labels:
    # Add default labels for the volumeClaimTemplate of the StatefulSet
    enabled: false
  # OpenSearch Persistent Volume Storage Class
  # If defined, storageClassName: <storageClass>
  # If set to "-", storageClassName: "", which disables dynamic provisioning
  # If undefined (the default) or set to null, no storageClassName spec is
  #   set, choosing the default provisioner.  (gp2 on AWS, standard on
  #   GKE, AWS & OpenStack)
  #
  # storageClass: "-"
  accessModes:
    - ReadWriteOnce
  size: 8Gi
  annotations: {}

extraVolumes: []
  # - name: extras
  #   emptyDir: {}

extraVolumeMounts: []
  # - name: extras
  #   mountPath: /usr/share/extras
  #   readOnly: true

extraContainers: []
  # - name: do-something
  #   image: busybox
  #   command: ['do', 'something']

extraInitContainers: []
  # - name: do-somethings
  #   image: busybox
  #   command: ['do', 'something']

# This is the PriorityClass settings as defined in
# https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
priorityClassName: ""

# By default this will make sure two pods don't end up on the same node
# Changing this to a region would allow you to spread pods across regions
antiAffinityTopologyKey: "kubernetes.io/hostname"

# Hard means that by default pods will only be scheduled if there are enough nodes for them
# and that they will never end up on the same node. Setting this to soft will do this "best effort"
antiAffinity: "soft"

# This is the node affinity settings as defined in
# https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#node-affinity-beta-feature
nodeAffinity: {}

# The default is to deploy all pods serially. By setting this to parallel all pods are started at
# the same time when bootstrapping the cluster
podManagementPolicy: "Parallel"

# The environment variables injected by service links are not used, but can lead to slow OpenSearch boot times when
# there are many services in the current namespace.
# If you experience slow pod startups you probably want to set this to `false`.
enableServiceLinks: true

protocol: http
httpPort: 9200
transportPort: 9300

service:
  labels: {}
  labelsHeadless: {}
  type: ClusterIP
  nodePort: ""
  annotations: {}
  httpPortName: http
  transportPortName: transport
  loadBalancerIP: ""
  loadBalancerSourceRanges: []
  externalTrafficPolicy: ""

updateStrategy: RollingUpdate

# This is the max unavailable setting for the pod disruption budget
# The default value of 1 will make sure that kubernetes won't allow more than 1
# of your pods to be unavailable during maintenance
maxUnavailable: 1

podSecurityContext:
  fsGroup: 1000
  runAsUser: 1000

securityContext:
  capabilities:
    drop:
      - ALL
  # readOnlyRootFilesystem: true
  runAsNonRoot: true
  runAsUser: 1000

securityConfig:
  enabled: true
  path: "/usr/share/opensearch/plugins/opensearch-security/securityconfig"
  actionGroupsSecret:
  configSecret:
  internalUsersSecret:
  rolesSecret:
  rolesMappingSecret:
  tenantsSecret:
  # The following option simplifies securityConfig by using a single secret and
  # specifying the config files as keys in the secret instead of creating
  # different secrets for for each config file.
  # Note that this is an alternative to the individual secret configuration
  # above and shouldn't be used if the above secrets are used.
  config:
    # There are multiple ways to define the configuration here:
    # * If you define anything under data, the chart will automatically create
    #   a secret and mount it.
    # * If you define securityConfigSecret, the chart will assume this secret is
    #   created externally and mount it.
    # * It is an error to define both data and securityConfigSecret.
    securityConfigSecret: ""
    data: {}
      # config.yml: |-
      # internal_users.yml: |-
      # roles.yml: |-
      # roles_mapping.yml: |-
      # action_groups.yml: |-
      # tenants.yml: |-

# How long to wait for opensearch to stop gracefully
terminationGracePeriod: 120

sysctlVmMaxMapCount: 262144

readinessProbe:
  failureThreshold: 3
  initialDelaySeconds: 10
  periodSeconds: 10
  successThreshold: 3
  timeoutSeconds: 2000

## Use an alternate scheduler.
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""

imagePullSecrets: []
nodeSelector: {}
tolerations: []

# Enabling this will publically expose your OpenSearch instance.
# Only enable this if you have security enabled on your cluster
ingress:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



charts/opensearch/values.yaml [18:342]:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
minimumMasterNodes: 1

# if not set, falls back to parsing .Values.imageTag, then .Chart.appVersion.
majorVersion: ""

global:
  # Set if you want to change the default docker registry, e.g. a private one.
  dockerRegistry: ""

# Allows you to add any config files in {{ .Values.opensearchHome }}/config
opensearchHome: /usr/share/opensearch
# such as opensearch.yml and log4j2.properties
config:
  # Values must be YAML literal style scalar / YAML multiline string.
  # <filename>: |
  #   <formatted-value(s)>
  # log4j2.properties: |
  #   status = error
  #
  #   appender.console.type = Console
  #   appender.console.name = console
  #   appender.console.layout.type = PatternLayout
  #   appender.console.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] [%node_name]%marker %m%n
  #
  #   rootLogger.level = info
  #   rootLogger.appenderRef.console.ref = console
  opensearch.yml: |
    cluster.name: opensearch-cluster

    # Bind to all interfaces because we don't know what IP address Docker will assign to us.
    network.host: 0.0.0.0

    # # minimum_master_nodes need to be explicitly set when bound on a public IP
    # # set to 1 to allow single node clusters
    # discovery.zen.minimum_master_nodes: 1

    # Setting network.host to a non-loopback address enables the annoying bootstrap checks. "Single-node" mode disables them again.
    # discovery.type: single-node

    # Start OpenSearch Security Demo Configuration
    # WARNING: revise all the lines below before you go into production
    plugins:
      security:
        ssl:
          transport:
            pemcert_filepath: esnode.pem
            pemkey_filepath: esnode-key.pem
            pemtrustedcas_filepath: root-ca.pem
            enforce_hostname_verification: false
          http:
            enabled: true
            pemcert_filepath: esnode.pem
            pemkey_filepath: esnode-key.pem
            pemtrustedcas_filepath: root-ca.pem
        allow_unsafe_democertificates: true
        allow_default_init_securityindex: true
        authcz:
          admin_dn:
            - CN=kirk,OU=client,O=client,L=test,C=de
        audit.type: internal_opensearch
        enable_snapshot_restore_privilege: true
        check_snapshot_restore_write_privileges: true
        restapi:
          roles_enabled: ["all_access", "security_rest_api_access"]
        system_indices:
          enabled: true
          indices:
            [
              ".opendistro-alerting-config",
              ".opendistro-alerting-alert*",
              ".opendistro-anomaly-results*",
              ".opendistro-anomaly-detector*",
              ".opendistro-anomaly-checkpoints",
              ".opendistro-anomaly-detection-state",
              ".opendistro-reports-*",
              ".opendistro-notifications-*",
              ".opendistro-notebooks",
              ".opendistro-asynchronous-search-response*",
            ]
    ######## End OpenSearch Security Demo Configuration ########
  # log4j2.properties:

# Extra environment variables to append to this nodeGroup
# This will be appended to the current 'env:' key. You can use any of the kubernetes env
# syntax here
extraEnvs: []
#  - name: MY_ENVIRONMENT_VAR
#    value: the_value_goes_here

# Allows you to load environment variables from kubernetes secret or config map
envFrom: []
# - secretRef:
#     name: env-secret
# - configMapRef:
#     name: config-map

# A list of secrets and their paths to mount inside the pod
# This is useful for mounting certificates for security and for mounting
# the X-Pack license
secretMounts: []

hostAliases: []
# - ip: "127.0.0.1"
#   hostnames:
#   - "foo.local"
#   - "bar.local"

image:
  repository: "opensearchproject/opensearch"
  # override image tag, which is .Chart.AppVersion by default
  tag: ""
  pullPolicy: "IfNotPresent"

podAnnotations: {}
  # iam.amazonaws.com/role: es-cluster

# additionals labels
labels: {}

opensearchJavaOpts: "-Xmx512M -Xms512M"

resources:
  requests:
    cpu: "1000m"
    memory: "100Mi"

initResources: {}
  # limits:
  #   cpu: "25m"
  #   # memory: "128Mi"
  # requests:
  #   cpu: "25m"
  #   memory: "128Mi"

sidecarResources: {}
  # limits:
  #   cpu: "25m"
  #   # memory: "128Mi"
  # requests:
  #   cpu: "25m"
  #   memory: "128Mi"

networkHost: "0.0.0.0"

rbac:
  create: false
  serviceAccountAnnotations: {}
  serviceAccountName: ""

podSecurityPolicy:
  create: false
  name: ""
  spec:
    privileged: true
    fsGroup:
      rule: RunAsAny
    runAsUser:
      rule: RunAsAny
    seLinux:
      rule: RunAsAny
    supplementalGroups:
      rule: RunAsAny
    volumes:
      - secret
      - configMap
      - persistentVolumeClaim
      - emptyDir

persistence:
  enabled: true
  # Set to false to disable the `fsgroup-volume` initContainer that will update permissions on the persistent disk.
  enableInitChown: true
  # override image, which is busybox by default
  # image: busybox
  # override image tag, which is latest by default
  # imageTag:
  labels:
    # Add default labels for the volumeClaimTemplate of the StatefulSet
    enabled: false
  # OpenSearch Persistent Volume Storage Class
  # If defined, storageClassName: <storageClass>
  # If set to "-", storageClassName: "", which disables dynamic provisioning
  # If undefined (the default) or set to null, no storageClassName spec is
  #   set, choosing the default provisioner.  (gp2 on AWS, standard on
  #   GKE, AWS & OpenStack)
  #
  # storageClass: "-"
  accessModes:
    - ReadWriteOnce
  size: 8Gi
  annotations: {}

extraVolumes: []
  # - name: extras
  #   emptyDir: {}

extraVolumeMounts: []
  # - name: extras
  #   mountPath: /usr/share/extras
  #   readOnly: true

extraContainers: []
  # - name: do-something
  #   image: busybox
  #   command: ['do', 'something']

extraInitContainers: []
  # - name: do-somethings
  #   image: busybox
  #   command: ['do', 'something']

# This is the PriorityClass settings as defined in
# https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
priorityClassName: ""

# By default this will make sure two pods don't end up on the same node
# Changing this to a region would allow you to spread pods across regions
antiAffinityTopologyKey: "kubernetes.io/hostname"

# Hard means that by default pods will only be scheduled if there are enough nodes for them
# and that they will never end up on the same node. Setting this to soft will do this "best effort"
antiAffinity: "soft"

# This is the node affinity settings as defined in
# https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#node-affinity-beta-feature
nodeAffinity: {}

# The default is to deploy all pods serially. By setting this to parallel all pods are started at
# the same time when bootstrapping the cluster
podManagementPolicy: "Parallel"

# The environment variables injected by service links are not used, but can lead to slow OpenSearch boot times when
# there are many services in the current namespace.
# If you experience slow pod startups you probably want to set this to `false`.
enableServiceLinks: true

protocol: http
httpPort: 9200
transportPort: 9300

service:
  labels: {}
  labelsHeadless: {}
  type: ClusterIP
  nodePort: ""
  annotations: {}
  httpPortName: http
  transportPortName: transport
  loadBalancerIP: ""
  loadBalancerSourceRanges: []
  externalTrafficPolicy: ""

updateStrategy: RollingUpdate

# This is the max unavailable setting for the pod disruption budget
# The default value of 1 will make sure that kubernetes won't allow more than 1
# of your pods to be unavailable during maintenance
maxUnavailable: 1

podSecurityContext:
  fsGroup: 1000
  runAsUser: 1000

securityContext:
  capabilities:
    drop:
      - ALL
  # readOnlyRootFilesystem: true
  runAsNonRoot: true
  runAsUser: 1000

securityConfig:
  enabled: true
  path: "/usr/share/opensearch/plugins/opensearch-security/securityconfig"
  actionGroupsSecret:
  configSecret:
  internalUsersSecret:
  rolesSecret:
  rolesMappingSecret:
  tenantsSecret:
  # The following option simplifies securityConfig by using a single secret and
  # specifying the config files as keys in the secret instead of creating
  # different secrets for for each config file.
  # Note that this is an alternative to the individual secret configuration
  # above and shouldn't be used if the above secrets are used.
  config:
    # There are multiple ways to define the configuration here:
    # * If you define anything under data, the chart will automatically create
    #   a secret and mount it.
    # * If you define securityConfigSecret, the chart will assume this secret is
    #   created externally and mount it.
    # * It is an error to define both data and securityConfigSecret.
    securityConfigSecret: ""
    data: {}
      # config.yml: |-
      # internal_users.yml: |-
      # roles.yml: |-
      # roles_mapping.yml: |-
      # action_groups.yml: |-
      # tenants.yml: |-

# How long to wait for opensearch to stop gracefully
terminationGracePeriod: 120

sysctlVmMaxMapCount: 262144

readinessProbe:
  failureThreshold: 3
  initialDelaySeconds: 10
  periodSeconds: 10
  successThreshold: 3
  timeoutSeconds: 2000

## Use an alternate scheduler.
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""

imagePullSecrets: []
nodeSelector: {}
tolerations: []

# Enabling this will publically expose your OpenSearch instance.
# Only enable this if you have security enabled on your cluster
ingress:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



