t/debug/debug-mode.t (8 lines of code) (raw):

# # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to You under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # use t::APISIX 'no_plan'; repeat_each(1); no_long_string(); no_root_location(); our $debug_config = t::APISIX::read_file("conf/debug.yaml"); $debug_config =~ s/basic:\n enable: false/basic:\n enable: true/; run_tests; __DATA__ === TEST 1: loaded plugin --- debug_config eval: $::debug_config --- config location /t { content_by_lua_block { ngx.sleep(0.3) ngx.say("done") } } --- request GET /t --- response_body done --- error_log loaded plugin and sort by priority: 23000 name: real-ip loaded plugin and sort by priority: 22000 name: client-control loaded plugin and sort by priority: 12015 name: request-id loaded plugin and sort by priority: 12011 name: zipkin loaded plugin and sort by priority: 12000 name: ext-plugin-pre-req loaded plugin and sort by priority: 11000 name: fault-injection loaded plugin and sort by priority: 10000 name: serverless-pre-function loaded plugin and sort by priority: 4000 name: cors loaded plugin and sort by priority: 3000 name: ip-restriction loaded plugin and sort by priority: 2990 name: referer-restriction loaded plugin and sort by priority: 2900 name: uri-blocker loaded plugin and sort by priority: 2800 name: request-validation loaded plugin and sort by priority: 2600 name: multi-auth loaded plugin and sort by priority: 2599 name: openid-connect loaded plugin and sort by priority: 2555 name: wolf-rbac loaded plugin and sort by priority: 2530 name: hmac-auth loaded plugin and sort by priority: 2520 name: basic-auth loaded plugin and sort by priority: 2510 name: jwt-auth loaded plugin and sort by priority: 2500 name: key-auth loaded plugin and sort by priority: 2400 name: consumer-restriction loaded plugin and sort by priority: 2000 name: authz-keycloak loaded plugin and sort by priority: 1085 name: proxy-cache loaded plugin and sort by priority: 1010 name: proxy-mirror loaded plugin and sort by priority: 1008 name: proxy-rewrite loaded plugin and sort by priority: 1005 name: api-breaker loaded plugin and sort by priority: 1003 name: limit-conn loaded plugin and sort by priority: 1002 name: limit-count loaded plugin and sort by priority: 1001 name: limit-req loaded plugin and sort by priority: 995 name: gzip loaded plugin and sort by priority: 990 name: server-info loaded plugin and sort by priority: 966 name: traffic-split loaded plugin and sort by priority: 900 name: redirect loaded plugin and sort by priority: 899 name: response-rewrite loaded plugin and sort by priority: 506 name: grpc-transcode loaded plugin and sort by priority: 500 name: prometheus loaded plugin and sort by priority: 412 name: echo loaded plugin and sort by priority: 410 name: http-logger loaded plugin and sort by priority: 406 name: sls-logger loaded plugin and sort by priority: 405 name: tcp-logger loaded plugin and sort by priority: 403 name: kafka-logger loaded plugin and sort by priority: 402 name: rocketmq-logger loaded plugin and sort by priority: 401 name: syslog loaded plugin and sort by priority: 400 name: udp-logger loaded plugin and sort by priority: 398 name: clickhouse-logger loaded plugin and sort by priority: 0 name: example-plugin loaded plugin and sort by priority: -2000 name: serverless-post-function loaded plugin and sort by priority: -3000 name: ext-plugin-post-req === TEST 2: set route(no plugin) --- config location /t { content_by_lua_block { local t = require("lib.test_admin").test local code, body = t('/apisix/admin/routes/1', ngx.HTTP_PUT, [[{ "methods": ["GET"], "uri": "/hello", "upstream": { "nodes": { "127.0.0.1:1980": 1 }, "type": "roundrobin" } }]] ) if code >= 300 then ngx.status = code end ngx.say(body) } } --- request GET /t --- response_body passed === TEST 3: hit routes --- debug_config eval: $::debug_config --- request GET /hello --- response_body hello world --- response_headers Apisix-Plugins: no plugin === TEST 4: set route(one plugin) --- config location /t { content_by_lua_block { local t = require("lib.test_admin").test local code, body = t('/apisix/admin/routes/1', ngx.HTTP_PUT, [[{ "methods": ["GET"], "plugins": { "limit-count": { "count": 2, "time_window": 60, "rejected_code": 503, "key": "remote_addr" }, "limit-conn": { "conn": 100, "burst": 50, "default_conn_delay": 0.1, "rejected_code": 503, "key": "remote_addr" } }, "upstream": { "nodes": { "127.0.0.1:1980": 1 }, "type": "roundrobin" }, "uri": "/hello" }]] ) if code >= 300 then ngx.status = code end ngx.say(body) } } --- request GET /t --- response_body passed === TEST 5: hit routes --- debug_config eval: $::debug_config --- config location /t { content_by_lua_block { local json = require("toolkit.json") local ngx_re = require("ngx.re") local http = require "resty.http" local httpc = http.new() local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" local res, err = httpc:request_uri(uri, { method = "GET", }) local debug_header = res.headers["Apisix-Plugins"] local arr = ngx_re.split(debug_header, ", ") local hash = {} for i, v in ipairs(arr) do hash[v] = true end ngx.status = res.status ngx.say(json.encode(hash)) } } --- request GET /t --- response_body {"limit-conn":true,"limit-count":true} === TEST 6: global rule, header sent --- config location /t { content_by_lua_block { local t = require("lib.test_admin").test local code, body = t('/apisix/admin/global_rules/1', ngx.HTTP_PUT, [[{ "plugins": { "response-rewrite": { "status_code": 200, "body": "yes\n" } } }]] ) if code >= 300 then ngx.status = code end ngx.say(body) } } --- request GET /t --- response_body passed === TEST 7: hit routes --- debug_config eval: $::debug_config --- config location /t { content_by_lua_block { local json = require("toolkit.json") local ngx_re = require("ngx.re") local http = require "resty.http" local httpc = http.new() local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" local res, err = httpc:request_uri(uri, { method = "GET", }) local debug_header = res.headers["Apisix-Plugins"] local arr = ngx_re.split(debug_header, ", ") local hash = {} for i, v in ipairs(arr) do hash[v] = true end ngx.status = res.status ngx.say(json.encode(hash)) } } --- request GET /t --- response_body {"limit-conn":true,"limit-count":true,"response-rewrite":true} --- error_log Apisix-Plugins: response-rewrite === TEST 8: clear global routes --- config location /t { content_by_lua_block { local t = require("lib.test_admin").test local code, body = t('/apisix/admin/global_rules/1', ngx.HTTP_DELETE ) if code >= 300 then ngx.status = code end ngx.say(body) } } --- request GET /t --- response_body passed === TEST 9: set stream route --- config location /t { content_by_lua_block { local t = require("lib.test_admin").test local code, body = t('/apisix/admin/stream_routes/1', ngx.HTTP_PUT, [[{ "remote_addr": "127.0.0.1", "server_port": 1985, "plugins": { "mqtt-proxy": { "protocol_name": "MQTT", "protocol_level": 4 } }, "upstream": { "type": "chash", "key": "mqtt_client_id", "nodes": [ { "host": "127.0.0.1", "port": 1995, "weight": 1 } ] } }]] ) if code >= 300 then ngx.status = code end ngx.say(body) } } --- request GET /t --- response_body passed === TEST 10: hit route --- debug_config eval: $::debug_config --- stream_request eval "\x10\x0f\x00\x04\x4d\x51\x54\x54\x04\x02\x00\x3c\x00\x03\x66\x6f\x6f" --- stream_response hello world --- error_log mqtt client id: foo while prereading client data