pkg/resources/config/crd/bases/camel.apache.org_builds.yaml

# ---------------------------------------------------------------------------
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ---------------------------------------------------------------------------

---
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  annotations:
    controller-gen.kubebuilder.io/version: v0.17.2
  name: builds.camel.apache.org
spec:
  group: camel.apache.org
  names:
    categories:
    - kamel
    - camel
    kind: Build
    listKind: BuildList
    plural: builds
    shortNames:
    - ikb
    singular: build
  scope: Namespaced
  versions:
  - additionalPrinterColumns:
    - description: The build phase
      jsonPath: .status.phase
      name: Phase
      type: string
    - description: The time at which the build was created
      jsonPath: .metadata.creationTimestamp
      name: Age
      type: date
    - description: The time at which the build was last (re-)started
      jsonPath: .status.startedAt
      name: Started
      type: date
    - description: The build last execution duration
      jsonPath: .status.duration
      name: Duration
      type: string
    - description: The number of execution attempts
      jsonPath: .status.failure.recovery.attempt
      name: Attempts
      type: integer
    name: v1
    schema:
      openAPIV3Schema:
        description: Build is the Schema for the builds API.
        properties:
          apiVersion:
            description: |-
              APIVersion defines the versioned schema of this representation of an object.
              Servers should convert recognized schemas to the latest internal value, and
              may reject unrecognized values.
              More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
            type: string
          kind:
            description: |-
              Kind is a string value representing the REST resource this object represents.
              Servers may infer this from the endpoint the client submits requests to.
              Cannot be updated.
              In CamelCase.
              More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
            type: string
          metadata:
            type: object
          spec:
            description: |-
              BuildSpec defines the list of tasks to be execute for a Build. From Camel K version 2, it would be more appropriate
              to think it as pipeline.
            properties:
              configuration:
                description: |-
                  The configuration that should be used to perform the Build.
                  Deprecated: no longer in use in Camel K 2 - maintained for backward compatibility
                properties:
                  annotations:
                    additionalProperties:
                      type: string
                    description: Annotation to use for the builder pod. Only used
                      for `pod` strategy
                    type: object
                  limitCPU:
                    description: The maximum amount of CPU required. Only used for
                      `pod` strategy
                    type: string
                  limitMemory:
                    description: The maximum amount of memory required. Only used
                      for `pod` strategy
                    type: string
                  nodeSelector:
                    additionalProperties:
                      type: string
                    description: The node selector for the builder pod. Only used
                      for `pod` strategy
                    type: object
                  operatorNamespace:
                    description: The namespace where to run the builder Pod (must
                      be the same of the operator in charge of this Build reconciliation).
                    type: string
                  orderStrategy:
                    description: the build order strategy to adopt
                    enum:
                    - dependencies
                    - fifo
                    - sequential
                    type: string
                  platforms:
                    description: The list of platforms used in order to build a container
                      image.
                    items:
                      type: string
                    type: array
                  requestCPU:
                    description: The minimum amount of CPU required. Only used for
                      `pod` strategy
                    type: string
                  requestMemory:
                    description: The minimum amount of memory required. Only used
                      for `pod` strategy
                    type: string
                  strategy:
                    description: the strategy to adopt
                    enum:
                    - routine
                    - pod
                    type: string
                  toolImage:
                    description: The container image to be used to run the build.
                    type: string
                type: object
              maxRunningBuilds:
                description: |-
                  the maximum amount of parallel running builds started by this operator instance
                  Deprecated: no longer in use in Camel K 2 - maintained for backward compatibility
                format: int32
                type: integer
              operatorNamespace:
                description: |-
                  The namespace where to run the builder Pod (must be the same of the operator in charge of this Build reconciliation).
                  Deprecated: no longer in use in Camel K 2 - maintained for backward compatibility
                type: string
              tasks:
                description: The sequence of tasks (pipeline) to be performed.
                items:
                  description: Task represents the abstract task. Only one of the
                    task should be configured to represent the specific task chosen.
                  properties:
                    buildah:
                      description: |-
                        a BuildahTask, for Buildah strategy
                        Deprecated: use jib or a custom publishing strategy instead
                      properties:
                        baseImage:
                          description: base image layer
                          type: string
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        contextDir:
                          description: can be useful to share info with other tasks
                          type: string
                        executorImage:
                          description: docker image to use
                          type: string
                        image:
                          description: final image name
                          type: string
                        name:
                          description: name of the task
                          type: string
                        platform:
                          description: The platform of build image
                          type: string
                        registry:
                          description: where to publish the final image
                          properties:
                            address:
                              description: the URI to access
                              type: string
                            ca:
                              description: the configmap which stores the Certificate
                                Authority
                              type: string
                            insecure:
                              description: if the container registry is insecure (ie,
                                http only)
                              type: boolean
                            organization:
                              description: the registry organization
                              type: string
                            secret:
                              description: the secret where credentials are stored
                              type: string
                          type: object
                        verbose:
                          description: log more information
                          type: boolean
                      type: object
                    builder:
                      description: a BuilderTask, used to generate and build the project
                      properties:
                        baseImage:
                          description: the base image layer
                          type: string
                        buildDir:
                          description: workspace directory to use
                          type: string
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        dependencies:
                          description: the list of dependencies to use for this build
                          items:
                            type: string
                          type: array
                        git:
                          description: the configuration of the project to build on
                            Git
                          properties:
                            secret:
                              description: the Kubernetes secret where token is stored
                              type: string
                            url:
                              description: the URL of the project
                              type: string
                          type: object
                        maven:
                          description: the configuration required by Maven for the
                            application build phase
                          properties:
                            caSecrets:
                              description: |-
                                The Secrets name and key, containing the CA certificate(s) used to connect
                                to remote Maven repositories.
                                It can contain X.509 certificates, and PKCS#7 formatted certificate chains.
                                A JKS formatted keystore is automatically created to store the CA certificate(s),
                                and configured to be used as a trusted certificate(s) by the Maven commands.
                                Note that the root CA certificates are also imported into the created keystore.
                              items:
                                description: SecretKeySelector selects a key of a
                                  Secret.
                                properties:
                                  key:
                                    description: The key of the secret to select from.  Must
                                      be a valid secret key.
                                    type: string
                                  name:
                                    default: ""
                                    description: |-
                                      Name of the referent.
                                      This field is effectively required, but due to backwards compatibility is
                                      allowed to be empty. Instances of this type with an empty value here are
                                      almost certainly wrong.
                                      More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                    type: string
                                  optional:
                                    description: Specify whether the Secret or its
                                      key must be defined
                                    type: boolean
                                required:
                                - key
                                type: object
                                x-kubernetes-map-type: atomic
                              type: array
                            cliOptions:
                              description: |-
                                The CLI options that are appended to the list of arguments for Maven commands,
                                e.g., `-V,--no-transfer-progress,-Dstyle.color=never`.
                                See https://maven.apache.org/ref/3.8.4/maven-embedder/cli.html.
                              items:
                                type: string
                              type: array
                            extension:
                              description: |-
                                The Maven build extensions.
                                See https://maven.apache.org/guides/mini/guide-using-extensions.html.
                              items:
                                description: MavenArtifact defines a GAV (Group:Artifact:Type:Version:Classifier)
                                  Maven artifact.
                                properties:
                                  artifactId:
                                    description: Maven Artifact
                                    type: string
                                  classifier:
                                    description: Maven Classifier
                                    type: string
                                  groupId:
                                    description: Maven Group
                                    type: string
                                  type:
                                    description: Maven Type
                                    type: string
                                  version:
                                    description: Maven Version
                                    type: string
                                required:
                                - artifactId
                                - groupId
                                type: object
                              type: array
                            localRepository:
                              description: The path of the local Maven repository.
                              type: string
                            profiles:
                              description: |-
                                A reference to the ConfigMap or Secret key that contains
                                the Maven profile.
                              items:
                                description: ValueSource --.
                                properties:
                                  configMapKeyRef:
                                    description: Selects a key of a ConfigMap.
                                    properties:
                                      key:
                                        description: The key to select.
                                        type: string
                                      name:
                                        default: ""
                                        description: |-
                                          Name of the referent.
                                          This field is effectively required, but due to backwards compatibility is
                                          allowed to be empty. Instances of this type with an empty value here are
                                          almost certainly wrong.
                                          More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        type: string
                                      optional:
                                        description: Specify whether the ConfigMap
                                          or its key must be defined
                                        type: boolean
                                    required:
                                    - key
                                    type: object
                                    x-kubernetes-map-type: atomic
                                  secretKeyRef:
                                    description: Selects a key of a secret.
                                    properties:
                                      key:
                                        description: The key of the secret to select
                                          from.  Must be a valid secret key.
                                        type: string
                                      name:
                                        default: ""
                                        description: |-
                                          Name of the referent.
                                          This field is effectively required, but due to backwards compatibility is
                                          allowed to be empty. Instances of this type with an empty value here are
                                          almost certainly wrong.
                                          More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        type: string
                                      optional:
                                        description: Specify whether the Secret or
                                          its key must be defined
                                        type: boolean
                                    required:
                                    - key
                                    type: object
                                    x-kubernetes-map-type: atomic
                                type: object
                              type: array
                            properties:
                              additionalProperties:
                                type: string
                              description: The Maven properties.
                              type: object
                            repositories:
                              description: additional repositories
                              items:
                                description: Repository defines a Maven repository.
                                properties:
                                  id:
                                    description: identifies the repository
                                    type: string
                                  name:
                                    description: name of the repository
                                    type: string
                                  releases:
                                    description: can use stable releases
                                    properties:
                                      checksumPolicy:
                                        description: |-
                                          When Maven deploys files to the repository, it also deploys corresponding checksum files.
                                          Your options are to `ignore`, `fail`, or `warn` on missing or incorrect checksums.
                                        type: string
                                      enabled:
                                        description: is the policy activated or not
                                        type: boolean
                                      updatePolicy:
                                        description: |-
                                          This element specifies how often updates should attempt to occur.
                                          Maven will compare the local POM's timestamp (stored in a repository's maven-metadata file) to the remote.
                                          The choices are: `always`, `daily` (default), `interval:X` (where X is an integer in minutes) or `never`
                                        type: string
                                    required:
                                    - enabled
                                    type: object
                                  snapshots:
                                    description: can use snapshot
                                    properties:
                                      checksumPolicy:
                                        description: |-
                                          When Maven deploys files to the repository, it also deploys corresponding checksum files.
                                          Your options are to `ignore`, `fail`, or `warn` on missing or incorrect checksums.
                                        type: string
                                      enabled:
                                        description: is the policy activated or not
                                        type: boolean
                                      updatePolicy:
                                        description: |-
                                          This element specifies how often updates should attempt to occur.
                                          Maven will compare the local POM's timestamp (stored in a repository's maven-metadata file) to the remote.
                                          The choices are: `always`, `daily` (default), `interval:X` (where X is an integer in minutes) or `never`
                                        type: string
                                    required:
                                    - enabled
                                    type: object
                                  url:
                                    description: location of the repository
                                    type: string
                                required:
                                - id
                                - url
                                type: object
                              type: array
                            servers:
                              description: Servers (auth)
                              items:
                                description: Server see link:https://maven.apache.org/settings.html[Maven
                                  settings].
                                properties:
                                  configuration:
                                    additionalProperties:
                                      type: string
                                    description: Properties -- .
                                    type: object
                                  id:
                                    type: string
                                  password:
                                    type: string
                                  username:
                                    type: string
                                type: object
                              type: array
                            settings:
                              description: |-
                                A reference to the ConfigMap or Secret key that contains
                                the Maven settings.
                              properties:
                                configMapKeyRef:
                                  description: Selects a key of a ConfigMap.
                                  properties:
                                    key:
                                      description: The key to select.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the ConfigMap or
                                        its key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                                secretKeyRef:
                                  description: Selects a key of a secret.
                                  properties:
                                    key:
                                      description: The key of the secret to select
                                        from.  Must be a valid secret key.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the Secret or its
                                        key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                              type: object
                            settingsSecurity:
                              description: |-
                                A reference to the ConfigMap or Secret key that contains
                                the security of the Maven settings.
                              properties:
                                configMapKeyRef:
                                  description: Selects a key of a ConfigMap.
                                  properties:
                                    key:
                                      description: The key to select.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the ConfigMap or
                                        its key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                                secretKeyRef:
                                  description: Selects a key of a secret.
                                  properties:
                                    key:
                                      description: The key of the secret to select
                                        from.  Must be a valid secret key.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the Secret or its
                                        key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                              type: object
                          type: object
                        name:
                          description: name of the task
                          type: string
                        runtime:
                          description: the configuration required for the runtime
                            application
                          properties:
                            applicationClass:
                              description: application entry point (main) to be executed
                              type: string
                            capabilities:
                              additionalProperties:
                                description: |-
                                  Capability is a particular feature which requires a well known set of dependencies and other properties
                                  which are specified in the runtime catalog.
                                properties:
                                  buildTimeProperties:
                                    description: Set of required Camel build time
                                      properties
                                    items:
                                      description: CamelProperty represents a Camel
                                        property that may end up in an application.properties
                                        file.
                                      properties:
                                        key:
                                          type: string
                                        value:
                                          type: string
                                      required:
                                      - key
                                      type: object
                                    type: array
                                  dependencies:
                                    description: List of required Maven dependencies
                                    items:
                                      description: MavenArtifact defines a GAV (Group:Artifact:Type:Version:Classifier)
                                        Maven artifact.
                                      properties:
                                        artifactId:
                                          description: Maven Artifact
                                          type: string
                                        classifier:
                                          description: Maven Classifier
                                          type: string
                                        groupId:
                                          description: Maven Group
                                          type: string
                                        type:
                                          description: Maven Type
                                          type: string
                                        version:
                                          description: Maven Version
                                          type: string
                                      required:
                                      - artifactId
                                      - groupId
                                      type: object
                                    type: array
                                  metadata:
                                    additionalProperties:
                                      type: string
                                    description: Set of generic metadata
                                    type: object
                                  runtimeProperties:
                                    description: Set of required Camel runtime properties
                                    items:
                                      description: CamelProperty represents a Camel
                                        property that may end up in an application.properties
                                        file.
                                      properties:
                                        key:
                                          type: string
                                        value:
                                          type: string
                                      required:
                                      - key
                                      type: object
                                    type: array
                                type: object
                              description: features offered by this runtime
                              type: object
                            dependencies:
                              description: list of dependencies needed to run the
                                application
                              items:
                                description: MavenArtifact defines a GAV (Group:Artifact:Type:Version:Classifier)
                                  Maven artifact.
                                properties:
                                  artifactId:
                                    description: Maven Artifact
                                    type: string
                                  classifier:
                                    description: Maven Classifier
                                    type: string
                                  groupId:
                                    description: Maven Group
                                    type: string
                                  type:
                                    description: Maven Type
                                    type: string
                                  version:
                                    description: Maven Version
                                    type: string
                                required:
                                - artifactId
                                - groupId
                                type: object
                              type: array
                            metadata:
                              additionalProperties:
                                type: string
                              description: set of metadata
                              type: object
                            provider:
                              description: Camel main application provider, ie, Camel
                                Quarkus
                              type: string
                            version:
                              description: Camel K Runtime version
                              type: string
                          required:
                          - applicationClass
                          - dependencies
                          - provider
                          - version
                          type: object
                        sources:
                          description: the sources to add at build time
                          items:
                            description: SourceSpec defines the configuration for
                              one or more routes to be executed in a certain Camel
                              DSL language.
                            properties:
                              compression:
                                description: if the content is compressed (base64
                                  encrypted)
                                type: boolean
                              content:
                                description: the source code (plain text)
                                type: string
                              contentKey:
                                description: the confimap key holding the source content
                                type: string
                              contentRef:
                                description: the confimap reference holding the source
                                  content
                                type: string
                              contentType:
                                description: the content type (tipically text or binary)
                                type: string
                              from-kamelet:
                                description: True if the spec is generated from a
                                  Kamelet
                                type: boolean
                              interceptors:
                                description: |-
                                  Interceptors are optional identifiers the org.apache.camel.k.RoutesLoader
                                  uses to pre/post process sources
                                  Deprecated: no longer in use.
                                items:
                                  type: string
                                type: array
                              language:
                                description: specify which is the language (Camel
                                  DSL) used to interpret this source code
                                type: string
                              loader:
                                description: |-
                                  Loader is an optional id of the org.apache.camel.k.RoutesLoader that will
                                  interpret this source at runtime
                                type: string
                              name:
                                description: the name of the specification
                                type: string
                              path:
                                description: the path where the file is stored
                                type: string
                              property-names:
                                description: List of property names defined in the
                                  source (e.g. if type is "template")
                                items:
                                  type: string
                                type: array
                              rawContent:
                                description: the source code (binary)
                                format: byte
                                type: string
                              type:
                                description: Type defines the kind of source described
                                  by this object
                                type: string
                            type: object
                          type: array
                        steps:
                          description: the list of steps to execute (see pkg/builder/)
                          items:
                            type: string
                          type: array
                      type: object
                    custom:
                      description: User customizable task execution. These are executed
                        after the build and before the package task.
                      properties:
                        command:
                          description: |-
                            the command to execute
                            Deprecated: use ContainerCommands
                          type: string
                        commands:
                          description: the command to execute
                          items:
                            type: string
                          type: array
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        image:
                          description: the container image to use
                          type: string
                        name:
                          description: name of the task
                          type: string
                        publishingImage:
                          description: the desired image build name
                          type: string
                        userId:
                          description: the user id used to run the container
                          format: int64
                          type: integer
                      type: object
                    jib:
                      description: a JibTask, for Jib strategy
                      properties:
                        baseImage:
                          description: base image layer
                          type: string
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        contextDir:
                          description: can be useful to share info with other tasks
                          type: string
                        image:
                          description: final image name
                          type: string
                        name:
                          description: name of the task
                          type: string
                        registry:
                          description: where to publish the final image
                          properties:
                            address:
                              description: the URI to access
                              type: string
                            ca:
                              description: the configmap which stores the Certificate
                                Authority
                              type: string
                            insecure:
                              description: if the container registry is insecure (ie,
                                http only)
                              type: boolean
                            organization:
                              description: the registry organization
                              type: string
                            secret:
                              description: the secret where credentials are stored
                              type: string
                          type: object
                      type: object
                    kaniko:
                      description: |-
                        a KanikoTask, for Kaniko strategy
                        Deprecated: use jib or a custom publishing strategy instead
                      properties:
                        baseImage:
                          description: base image layer
                          type: string
                        cache:
                          description: use a cache
                          properties:
                            enabled:
                              description: true if a cache is enabled
                              type: boolean
                            persistentVolumeClaim:
                              description: the PVC used to store the cache
                              type: string
                          type: object
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        contextDir:
                          description: can be useful to share info with other tasks
                          type: string
                        executorImage:
                          description: docker image to use
                          type: string
                        image:
                          description: final image name
                          type: string
                        name:
                          description: name of the task
                          type: string
                        registry:
                          description: where to publish the final image
                          properties:
                            address:
                              description: the URI to access
                              type: string
                            ca:
                              description: the configmap which stores the Certificate
                                Authority
                              type: string
                            insecure:
                              description: if the container registry is insecure (ie,
                                http only)
                              type: boolean
                            organization:
                              description: the registry organization
                              type: string
                            secret:
                              description: the secret where credentials are stored
                              type: string
                          type: object
                        verbose:
                          description: log more information
                          type: boolean
                      type: object
                    package:
                      description: |-
                        Application pre publishing
                        a PackageTask, used to package the project
                      properties:
                        baseImage:
                          description: the base image layer
                          type: string
                        buildDir:
                          description: workspace directory to use
                          type: string
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        dependencies:
                          description: the list of dependencies to use for this build
                          items:
                            type: string
                          type: array
                        git:
                          description: the configuration of the project to build on
                            Git
                          properties:
                            secret:
                              description: the Kubernetes secret where token is stored
                              type: string
                            url:
                              description: the URL of the project
                              type: string
                          type: object
                        maven:
                          description: the configuration required by Maven for the
                            application build phase
                          properties:
                            caSecrets:
                              description: |-
                                The Secrets name and key, containing the CA certificate(s) used to connect
                                to remote Maven repositories.
                                It can contain X.509 certificates, and PKCS#7 formatted certificate chains.
                                A JKS formatted keystore is automatically created to store the CA certificate(s),
                                and configured to be used as a trusted certificate(s) by the Maven commands.
                                Note that the root CA certificates are also imported into the created keystore.
                              items:
                                description: SecretKeySelector selects a key of a
                                  Secret.
                                properties:
                                  key:
                                    description: The key of the secret to select from.  Must
                                      be a valid secret key.
                                    type: string
                                  name:
                                    default: ""
                                    description: |-
                                      Name of the referent.
                                      This field is effectively required, but due to backwards compatibility is
                                      allowed to be empty. Instances of this type with an empty value here are
                                      almost certainly wrong.
                                      More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                    type: string
                                  optional:
                                    description: Specify whether the Secret or its
                                      key must be defined
                                    type: boolean
                                required:
                                - key
                                type: object
                                x-kubernetes-map-type: atomic
                              type: array
                            cliOptions:
                              description: |-
                                The CLI options that are appended to the list of arguments for Maven commands,
                                e.g., `-V,--no-transfer-progress,-Dstyle.color=never`.
                                See https://maven.apache.org/ref/3.8.4/maven-embedder/cli.html.
                              items:
                                type: string
                              type: array
                            extension:
                              description: |-
                                The Maven build extensions.
                                See https://maven.apache.org/guides/mini/guide-using-extensions.html.
                              items:
                                description: MavenArtifact defines a GAV (Group:Artifact:Type:Version:Classifier)
                                  Maven artifact.
                                properties:
                                  artifactId:
                                    description: Maven Artifact
                                    type: string
                                  classifier:
                                    description: Maven Classifier
                                    type: string
                                  groupId:
                                    description: Maven Group
                                    type: string
                                  type:
                                    description: Maven Type
                                    type: string
                                  version:
                                    description: Maven Version
                                    type: string
                                required:
                                - artifactId
                                - groupId
                                type: object
                              type: array
                            localRepository:
                              description: The path of the local Maven repository.
                              type: string
                            profiles:
                              description: |-
                                A reference to the ConfigMap or Secret key that contains
                                the Maven profile.
                              items:
                                description: ValueSource --.
                                properties:
                                  configMapKeyRef:
                                    description: Selects a key of a ConfigMap.
                                    properties:
                                      key:
                                        description: The key to select.
                                        type: string
                                      name:
                                        default: ""
                                        description: |-
                                          Name of the referent.
                                          This field is effectively required, but due to backwards compatibility is
                                          allowed to be empty. Instances of this type with an empty value here are
                                          almost certainly wrong.
                                          More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        type: string
                                      optional:
                                        description: Specify whether the ConfigMap
                                          or its key must be defined
                                        type: boolean
                                    required:
                                    - key
                                    type: object
                                    x-kubernetes-map-type: atomic
                                  secretKeyRef:
                                    description: Selects a key of a secret.
                                    properties:
                                      key:
                                        description: The key of the secret to select
                                          from.  Must be a valid secret key.
                                        type: string
                                      name:
                                        default: ""
                                        description: |-
                                          Name of the referent.
                                          This field is effectively required, but due to backwards compatibility is
                                          allowed to be empty. Instances of this type with an empty value here are
                                          almost certainly wrong.
                                          More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                        type: string
                                      optional:
                                        description: Specify whether the Secret or
                                          its key must be defined
                                        type: boolean
                                    required:
                                    - key
                                    type: object
                                    x-kubernetes-map-type: atomic
                                type: object
                              type: array
                            properties:
                              additionalProperties:
                                type: string
                              description: The Maven properties.
                              type: object
                            repositories:
                              description: additional repositories
                              items:
                                description: Repository defines a Maven repository.
                                properties:
                                  id:
                                    description: identifies the repository
                                    type: string
                                  name:
                                    description: name of the repository
                                    type: string
                                  releases:
                                    description: can use stable releases
                                    properties:
                                      checksumPolicy:
                                        description: |-
                                          When Maven deploys files to the repository, it also deploys corresponding checksum files.
                                          Your options are to `ignore`, `fail`, or `warn` on missing or incorrect checksums.
                                        type: string
                                      enabled:
                                        description: is the policy activated or not
                                        type: boolean
                                      updatePolicy:
                                        description: |-
                                          This element specifies how often updates should attempt to occur.
                                          Maven will compare the local POM's timestamp (stored in a repository's maven-metadata file) to the remote.
                                          The choices are: `always`, `daily` (default), `interval:X` (where X is an integer in minutes) or `never`
                                        type: string
                                    required:
                                    - enabled
                                    type: object
                                  snapshots:
                                    description: can use snapshot
                                    properties:
                                      checksumPolicy:
                                        description: |-
                                          When Maven deploys files to the repository, it also deploys corresponding checksum files.
                                          Your options are to `ignore`, `fail`, or `warn` on missing or incorrect checksums.
                                        type: string
                                      enabled:
                                        description: is the policy activated or not
                                        type: boolean
                                      updatePolicy:
                                        description: |-
                                          This element specifies how often updates should attempt to occur.
                                          Maven will compare the local POM's timestamp (stored in a repository's maven-metadata file) to the remote.
                                          The choices are: `always`, `daily` (default), `interval:X` (where X is an integer in minutes) or `never`
                                        type: string
                                    required:
                                    - enabled
                                    type: object
                                  url:
                                    description: location of the repository
                                    type: string
                                required:
                                - id
                                - url
                                type: object
                              type: array
                            servers:
                              description: Servers (auth)
                              items:
                                description: Server see link:https://maven.apache.org/settings.html[Maven
                                  settings].
                                properties:
                                  configuration:
                                    additionalProperties:
                                      type: string
                                    description: Properties -- .
                                    type: object
                                  id:
                                    type: string
                                  password:
                                    type: string
                                  username:
                                    type: string
                                type: object
                              type: array
                            settings:
                              description: |-
                                A reference to the ConfigMap or Secret key that contains
                                the Maven settings.
                              properties:
                                configMapKeyRef:
                                  description: Selects a key of a ConfigMap.
                                  properties:
                                    key:
                                      description: The key to select.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the ConfigMap or
                                        its key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                                secretKeyRef:
                                  description: Selects a key of a secret.
                                  properties:
                                    key:
                                      description: The key of the secret to select
                                        from.  Must be a valid secret key.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the Secret or its
                                        key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                              type: object
                            settingsSecurity:
                              description: |-
                                A reference to the ConfigMap or Secret key that contains
                                the security of the Maven settings.
                              properties:
                                configMapKeyRef:
                                  description: Selects a key of a ConfigMap.
                                  properties:
                                    key:
                                      description: The key to select.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the ConfigMap or
                                        its key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                                secretKeyRef:
                                  description: Selects a key of a secret.
                                  properties:
                                    key:
                                      description: The key of the secret to select
                                        from.  Must be a valid secret key.
                                      type: string
                                    name:
                                      default: ""
                                      description: |-
                                        Name of the referent.
                                        This field is effectively required, but due to backwards compatibility is
                                        allowed to be empty. Instances of this type with an empty value here are
                                        almost certainly wrong.
                                        More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
                                      type: string
                                    optional:
                                      description: Specify whether the Secret or its
                                        key must be defined
                                      type: boolean
                                  required:
                                  - key
                                  type: object
                                  x-kubernetes-map-type: atomic
                              type: object
                          type: object
                        name:
                          description: name of the task
                          type: string
                        runtime:
                          description: the configuration required for the runtime
                            application
                          properties:
                            applicationClass:
                              description: application entry point (main) to be executed
                              type: string
                            capabilities:
                              additionalProperties:
                                description: |-
                                  Capability is a particular feature which requires a well known set of dependencies and other properties
                                  which are specified in the runtime catalog.
                                properties:
                                  buildTimeProperties:
                                    description: Set of required Camel build time
                                      properties
                                    items:
                                      description: CamelProperty represents a Camel
                                        property that may end up in an application.properties
                                        file.
                                      properties:
                                        key:
                                          type: string
                                        value:
                                          type: string
                                      required:
                                      - key
                                      type: object
                                    type: array
                                  dependencies:
                                    description: List of required Maven dependencies
                                    items:
                                      description: MavenArtifact defines a GAV (Group:Artifact:Type:Version:Classifier)
                                        Maven artifact.
                                      properties:
                                        artifactId:
                                          description: Maven Artifact
                                          type: string
                                        classifier:
                                          description: Maven Classifier
                                          type: string
                                        groupId:
                                          description: Maven Group
                                          type: string
                                        type:
                                          description: Maven Type
                                          type: string
                                        version:
                                          description: Maven Version
                                          type: string
                                      required:
                                      - artifactId
                                      - groupId
                                      type: object
                                    type: array
                                  metadata:
                                    additionalProperties:
                                      type: string
                                    description: Set of generic metadata
                                    type: object
                                  runtimeProperties:
                                    description: Set of required Camel runtime properties
                                    items:
                                      description: CamelProperty represents a Camel
                                        property that may end up in an application.properties
                                        file.
                                      properties:
                                        key:
                                          type: string
                                        value:
                                          type: string
                                      required:
                                      - key
                                      type: object
                                    type: array
                                type: object
                              description: features offered by this runtime
                              type: object
                            dependencies:
                              description: list of dependencies needed to run the
                                application
                              items:
                                description: MavenArtifact defines a GAV (Group:Artifact:Type:Version:Classifier)
                                  Maven artifact.
                                properties:
                                  artifactId:
                                    description: Maven Artifact
                                    type: string
                                  classifier:
                                    description: Maven Classifier
                                    type: string
                                  groupId:
                                    description: Maven Group
                                    type: string
                                  type:
                                    description: Maven Type
                                    type: string
                                  version:
                                    description: Maven Version
                                    type: string
                                required:
                                - artifactId
                                - groupId
                                type: object
                              type: array
                            metadata:
                              additionalProperties:
                                type: string
                              description: set of metadata
                              type: object
                            provider:
                              description: Camel main application provider, ie, Camel
                                Quarkus
                              type: string
                            version:
                              description: Camel K Runtime version
                              type: string
                          required:
                          - applicationClass
                          - dependencies
                          - provider
                          - version
                          type: object
                        sources:
                          description: the sources to add at build time
                          items:
                            description: SourceSpec defines the configuration for
                              one or more routes to be executed in a certain Camel
                              DSL language.
                            properties:
                              compression:
                                description: if the content is compressed (base64
                                  encrypted)
                                type: boolean
                              content:
                                description: the source code (plain text)
                                type: string
                              contentKey:
                                description: the confimap key holding the source content
                                type: string
                              contentRef:
                                description: the confimap reference holding the source
                                  content
                                type: string
                              contentType:
                                description: the content type (tipically text or binary)
                                type: string
                              from-kamelet:
                                description: True if the spec is generated from a
                                  Kamelet
                                type: boolean
                              interceptors:
                                description: |-
                                  Interceptors are optional identifiers the org.apache.camel.k.RoutesLoader
                                  uses to pre/post process sources
                                  Deprecated: no longer in use.
                                items:
                                  type: string
                                type: array
                              language:
                                description: specify which is the language (Camel
                                  DSL) used to interpret this source code
                                type: string
                              loader:
                                description: |-
                                  Loader is an optional id of the org.apache.camel.k.RoutesLoader that will
                                  interpret this source at runtime
                                type: string
                              name:
                                description: the name of the specification
                                type: string
                              path:
                                description: the path where the file is stored
                                type: string
                              property-names:
                                description: List of property names defined in the
                                  source (e.g. if type is "template")
                                items:
                                  type: string
                                type: array
                              rawContent:
                                description: the source code (binary)
                                format: byte
                                type: string
                              type:
                                description: Type defines the kind of source described
                                  by this object
                                type: string
                            type: object
                          type: array
                        steps:
                          description: the list of steps to execute (see pkg/builder/)
                          items:
                            type: string
                          type: array
                      type: object
                    s2i:
                      description: |-
                        a S2iTask, for S2I strategy
                        Deprecated: use jib or a custom publishing strategy instead
                      properties:
                        baseImage:
                          description: base image layer
                          type: string
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        contextDir:
                          description: can be useful to share info with other tasks
                          type: string
                        image:
                          description: final image name
                          type: string
                        name:
                          description: name of the task
                          type: string
                        registry:
                          description: where to publish the final image
                          properties:
                            address:
                              description: the URI to access
                              type: string
                            ca:
                              description: the configmap which stores the Certificate
                                Authority
                              type: string
                            insecure:
                              description: if the container registry is insecure (ie,
                                http only)
                              type: boolean
                            organization:
                              description: the registry organization
                              type: string
                            secret:
                              description: the secret where credentials are stored
                              type: string
                          type: object
                        tag:
                          description: used by the ImageStream
                          type: string
                      type: object
                    spectrum:
                      description: |-
                        a SpectrumTask, for Spectrum strategy
                        Deprecated: use jib or a custom publishing strategy instead
                      properties:
                        baseImage:
                          description: base image layer
                          type: string
                        configuration:
                          description: The configuration that should be used to perform
                            the Build.
                          properties:
                            annotations:
                              additionalProperties:
                                type: string
                              description: Annotation to use for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            limitCPU:
                              description: The maximum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            limitMemory:
                              description: The maximum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            nodeSelector:
                              additionalProperties:
                                type: string
                              description: The node selector for the builder pod.
                                Only used for `pod` strategy
                              type: object
                            operatorNamespace:
                              description: The namespace where to run the builder
                                Pod (must be the same of the operator in charge of
                                this Build reconciliation).
                              type: string
                            orderStrategy:
                              description: the build order strategy to adopt
                              enum:
                              - dependencies
                              - fifo
                              - sequential
                              type: string
                            platforms:
                              description: The list of platforms used in order to
                                build a container image.
                              items:
                                type: string
                              type: array
                            requestCPU:
                              description: The minimum amount of CPU required. Only
                                used for `pod` strategy
                              type: string
                            requestMemory:
                              description: The minimum amount of memory required.
                                Only used for `pod` strategy
                              type: string
                            strategy:
                              description: the strategy to adopt
                              enum:
                              - routine
                              - pod
                              type: string
                            toolImage:
                              description: The container image to be used to run the
                                build.
                              type: string
                          type: object
                        contextDir:
                          description: can be useful to share info with other tasks
                          type: string
                        image:
                          description: final image name
                          type: string
                        name:
                          description: name of the task
                          type: string
                        registry:
                          description: where to publish the final image
                          properties:
                            address:
                              description: the URI to access
                              type: string
                            ca:
                              description: the configmap which stores the Certificate
                                Authority
                              type: string
                            insecure:
                              description: if the container registry is insecure (ie,
                                http only)
                              type: boolean
                            organization:
                              description: the registry organization
                              type: string
                            secret:
                              description: the secret where credentials are stored
                              type: string
                          type: object
                      type: object
                  type: object
                type: array
              timeout:
                description: |-
                  Timeout defines the Build maximum execution duration.
                  The Build deadline is set to the Build start time plus the Timeout duration.
                  If the Build deadline is exceeded, the Build context is canceled,
                  and its phase set to BuildPhaseFailed.
                format: duration
                type: string
              toolImage:
                description: |-
                  The container image to be used to run the build.
                  Deprecated: no longer in use in Camel K 2 - maintained for backward compatibility
                type: string
            type: object
          status:
            description: BuildStatus defines the observed state of Build.
            properties:
              artifacts:
                description: a list of artifacts contained in the build
                items:
                  description: Artifact represents a materialized artifact (a jar
                    dependency or in general a file used by the build).
                  properties:
                    checksum:
                      description: a checksum (SHA1) of the content
                      type: string
                    id:
                      description: the identification (GAV for maven dependencies
                        or file name for other file types)
                      type: string
                    location:
                      description: where it is located in the builder `Pod`
                      type: string
                    target:
                      description: the expected location in the runtime
                      type: string
                  required:
                  - id
                  type: object
                type: array
              baseImage:
                description: the base image used for this build
                type: string
              conditions:
                description: a list of conditions occurred during the build
                items:
                  description: BuildCondition describes the state of a resource at
                    a certain point.
                  properties:
                    lastTransitionTime:
                      description: Last time the condition transitioned from one status
                        to another.
                      format: date-time
                      type: string
                    lastUpdateTime:
                      description: The last time this condition was updated.
                      format: date-time
                      type: string
                    message:
                      description: A human-readable message indicating details about
                        the transition.
                      type: string
                    reason:
                      description: The reason for the condition's last transition.
                      type: string
                    status:
                      description: Status of the condition, one of True, False, Unknown.
                      type: string
                    type:
                      description: Type of integration condition.
                      type: string
                  required:
                  - status
                  - type
                  type: object
                type: array
              digest:
                description: the digest from image
                type: string
              duration:
                description: |-
                  how long it took for the build
                  Change to Duration / ISO 8601 when CRD uses OpenAPI spec v3
                  https://github.com/OAI/OpenAPI-Specification/issues/845
                type: string
              error:
                description: the error description (if any)
                type: string
              failure:
                description: the reason of the failure (if any)
                properties:
                  reason:
                    description: a short text specifying the reason
                    type: string
                  recovery:
                    description: the recovery attempted for this failure
                    properties:
                      attempt:
                        description: attempt number
                        type: integer
                      attemptMax:
                        description: maximum number of attempts
                        type: integer
                      attemptTime:
                        description: time of the attempt execution
                        format: date-time
                        type: string
                    required:
                    - attempt
                    - attemptMax
                    type: object
                  time:
                    description: the time when the failure has happened
                    format: date-time
                    type: string
                required:
                - reason
                - recovery
                - time
                type: object
              image:
                description: the image name built
                type: string
              observedGeneration:
                description: ObservedGeneration is the most recent generation observed
                  for this Build.
                format: int64
                type: integer
              phase:
                description: describes the phase
                type: string
              rootImage:
                description: root image (the first image from which the incremental
                  image has started)
                type: string
              startedAt:
                description: the time when it started
                format: date-time
                type: string
            type: object
        type: object
    served: true
    storage: true
    subresources:
      status: {}