deploy/apisix/apisix-cm.yaml

#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
---
apiVersion: v1
kind: ConfigMap
metadata:
  name: apisix
  namespace: nuvolaris
data:
  config.yaml: |-
    #
    # Licensed to the Apache Software Foundation (ASF) under one or more
    # contributor license agreements.  See the NOTICE file distributed with
    # this work for additional information regarding copyright ownership.
    # The ASF licenses this file to You under the Apache License, Version 2.0
    # (the "License"); you may not use this file except in compliance with
    # the License.  You may obtain a copy of the License at
    #
    #     http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing, software
    # distributed under the License is distributed on an "AS IS" BASIS,
    # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    # See the License for the specific language governing permissions and
    # limitations under the License.
    #
    
    apisix:    # universal configurations
      node_listen:    # APISIX listening port
        - 9080
      enable_heartbeat: true
      enable_admin: true
      enable_admin_cors: true
      enable_debug: false

      enable_dev_mode: false                       # Sets nginx worker_processes to 1 if set to true
      enable_reuseport: true                       # Enable nginx SO_REUSEPORT switch if set to true.
      enable_ipv6: false # Enable nginx IPv6 resolver
      enable_server_tokens: true # Whether the APISIX version number should be shown in Server header

      # proxy_protocol:                   # Proxy Protocol configuration
      #   listen_http_port: 9181          # The port with proxy protocol for http, it differs from node_listen and admin_listen.
      #                                   # This port can only receive http request with proxy protocol, but node_listen & admin_listen
      #                                   # can only receive http request. If you enable proxy protocol, you must use this port to
      #                                   # receive http request with proxy protocol
      #   listen_https_port: 9182         # The port with proxy protocol for https
      #   enable_tcp_pp: true             # Enable the proxy protocol for tcp proxy, it works for stream_proxy.tcp option
      #   enable_tcp_pp_to_upstream: true # Enables the proxy protocol to the upstream server

      proxy_cache:                         # Proxy Caching configuration
        cache_ttl: 10s                     # The default caching time if the upstream does not specify the cache time
        zones:                             # The parameters of a cache
        - name: disk_cache_one             # The name of the cache, administrator can be specify
                                           # which cache to use by name in the admin api
          memory_size: 50m                 # The size of shared memory, it's used to store the cache index
          disk_size: 1G                    # The size of disk, it's used to store the cache data
          disk_path: "/tmp/disk_cache_one" # The path to store the cache data
          cache_levels: "1:2"              # The hierarchy levels of a cache
      #  - name: disk_cache_two
      #    memory_size: 50m
      #    disk_size: 1G
      #    disk_path: "/tmp/disk_cache_two"
      #    cache_levels: "1:2"

      router:
        http: radixtree_host_uri  # radixtree_uri: match route by uri(base on radixtree)
                                    # radixtree_host_uri: match route by host + uri(base on radixtree)
                                    # radixtree_uri_with_parameter: match route by uri with parameters
        ssl: 'radixtree_sni'        # radixtree_sni: match route by SNI(base on radixtree)

      proxy_mode: http
      # dns_resolver:
      #
      #   - 127.0.0.1
      #
      #   - 172.20.0.10
      #
      #   - 114.114.114.114
      #
      #   - 223.5.5.5
      #
      #   - 1.1.1.1
      #
      #   - 8.8.8.8
      #
      dns_resolver_valid: 30
      resolver_timeout: 5
      ssl:
        enable: false
        listen:
          - port: 9443
            enable_http2: true
        ssl_protocols: "TLSv1.2 TLSv1.3"
        ssl_ciphers: "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA256:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA"

      plugins:    # plugin list
        - api-breaker
        - authz-casbin
        - authz-casdoor
        - authz-keycloak
        - aws-lambda
        - azure-functions
        - basic-auth
        - clickhouse-logger
        - client-control
        - consumer-restriction
        - cors
        - csrf
        - datadog
        - echo
        - error-log-logger
        - ext-plugin-post-req
        - ext-plugin-post-resp
        - ext-plugin-pre-req
        - fault-injection
        - file-logger
        - forward-auth
        - google-cloud-logging
        - grpc-transcode
        - grpc-web
        - gzip
        - hmac-auth
        - http-logger
        - ip-restriction
        - jwt-auth
        - kafka-logger
        - kafka-proxy
        - key-auth
        - ldap-auth
        - limit-conn
        - limit-count
        - limit-req
        - loggly
        - mocking
        - opa
        - openid-connect
        - opentelemetry
        - openwhisk
        - prometheus
        - proxy-cache
        - proxy-control
        - proxy-mirror
        - proxy-rewrite
        - public-api
        - real-ip
        - redirect
        - referer-restriction
        - request-id
        - request-validation
        - request-transformer
        - response-rewrite
        - rocketmq-logger
        - server-info
        - serverless-post-function
        - serverless-pre-function
        - skywalking
        - skywalking-logger
        - sls-logger
        - splunk-hec-logging
        - syslog
        - tcp-logger
        - traffic-split
        - ua-restriction
        - udp-logger
        - uri-blocker
        - wolf-rbac
        - zipkin
        - elasticsearch-logge
        - openfunction
        - tencent-cloud-cls
        - ai
        - cas-auth
      plugin_attr:
        log-rotate:
          enable_compression: false
          max_kept: 3
          max_size: 10240
        prometheus:
          export_addr:
            ip: 0.0.0.0

    nginx_config:    # config for render the template to genarate nginx.conf
      error_log: "/dev/stderr"
      error_log_level: "warn"    # warn,error
      worker_processes: "auto"
      enable_cpu_affinity: true
      worker_rlimit_nofile: 20480  # the number of files a worker process can open, should be larger than worker_connections
      event:
        worker_connections: 10620
      http:
        enable_access_log: true
        access_log: "/dev/stdout"
        access_log_format: '$remote_addr - $remote_user [$time_local] $http_host \"$request\" $status $body_bytes_sent $request_time \"$http_referer\" \"$http_user_agent\" $upstream_addr $upstream_status $upstream_response_time \"$upstream_scheme://$upstream_host$upstream_uri\"'
        access_log_format_escape: default
        keepalive_timeout: "60s"
        client_header_timeout: 60s     # timeout for reading client request header, then 408 (Request Time-out) error is returned to the client
        client_body_timeout: 60s       # timeout for reading client request body, then 408 (Request Time-out) error is returned to the client
        send_timeout: 10s              # timeout for transmitting a response to the client.then the connection is closed
        underscores_in_headers: "on"   # default enables the use of underscores in client request header fields
        real_ip_header: "X-Real-IP"    # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_header
        real_ip_from:                  # http://nginx.org/en/docs/http/ngx_http_realip_module.html#set_real_ip_from
          - 127.0.0.1
          - 'unix:'

    deployment:
      role: traditional
      role_traditional:
        config_provider: etcd
      admin:
        allow_admin:    # http://nginx.org/en/docs/http/ngx_http_access_module.html#allow
          - 0.0.0.0/0
        #   - "::/64"
        admin_listen:
          ip: 0.0.0.0
          port: 9180
        # Default token when use API to call for Admin API.
        # *NOTE*: Highly recommended to modify this value to protect APISIX's Admin API.
        # Disabling this configuration item means that the Admin API does not
        # require any authentication.
        admin_key:
          # admin: can everything for configuration data
          - name: "admin"
            key: edd1c9f034335f136f87ad84b625c8f1
            role: admin
          # viewer: only can view configuration data
          - name: "viewer"
            key: 4054f7cf07e344346cd3f287985e76a2
            role: viewer

      etcd:
        host:                          # it's possible to define multiple etcd hosts addresses of the same etcd cluster.
          - "http://apisix-etcd.nuvolaris.svc.cluster.local:2379"
        prefix: "/apisix"    # configuration prefix in etcd
        timeout: 30    # 30 seconds