netbeans-project/nbproject/build-impl.xml (1,777 lines of code) (raw):

<?xml version="1.0" encoding="UTF-8"?> <!-- *** GENERATED FROM project.xml - DO NOT EDIT *** *** EDIT ../build.xml INSTEAD *** For the purpose of easier reading the script is divided into following sections: - initialization - compilation - jar - execution - debugging - javadoc - test compilation - test execution - test debugging - applet - cleanup --> <project xmlns:if="ant:if" xmlns:unless="ant:unless" basedir=".." default="default" name="Apache_SIS_on_GeoAPI_3.0-impl"> <fail message="Please build using Ant 1.9.7 or higher."> <condition> <not> <antversion atleast="1.9.7"/> </not> </condition> </fail> <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/> <!-- ====================== INITIALIZATION SECTION ====================== --> <target name="-pre-init"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="-pre-init" name="-init-private"> <property file="nbproject/private/config.properties"/> <property file="nbproject/private/configs/${config}.properties"/> <property file="nbproject/private/private.properties"/> </target> <target depends="-pre-init,-init-private" name="-init-user"> <property file="${user.properties.file}"/> <!-- The two properties below are usually overridden --> <!-- by the active platform. Just a fallback. --> <property name="default.javac.source" value="9"/> <property name="default.javac.target" value="9"/> </target> <target depends="-pre-init,-init-private,-init-user" name="-init-pre-project"> <property file="nbproject/configs/${config}.properties"/> <property file="nbproject/project.properties"/> <property name="netbeans.modular.tasks.version" value="1"/> <property location="${build.dir}/tasks/${netbeans.modular.tasks.version}" name="netbeans.modular.tasks.dir"/> </target> <target depends="-init-pre-project" name="-check-netbeans-tasks"> <condition property="netbeans.tasks.compiled"> <available file="${netbeans.modular.tasks.dir}/out/netbeans/ModuleInfoSelector.class"/> </condition> </target> <target depends="-init-pre-project,-check-netbeans-tasks" name="-init-compile-netbeans-tasks" unless="netbeans.tasks.compiled"> <echo file="${netbeans.modular.tasks.dir}/src/netbeans/CoalesceKeyvalue.java"> package netbeans; import java.util.ArrayList; import java.util.HashMap; import java.util.List; import java.util.Map; import java.util.regex.Pattern; import java.util.stream.Collectors; import org.apache.tools.ant.BuildException; import org.apache.tools.ant.Task; public class CoalesceKeyvalue extends Task { private String property; public void setProperty(String property) { this.property = property; } private String value; public void setValue(String value) { this.value = value; } private String valueSep; public void setValueSep(String valueSep) { this.valueSep = valueSep; } private String entrySep; public void setEntrySep(String entrySep) { this.entrySep = entrySep; } private String multiSep; public void setMultiSep(String multiSep) { this.multiSep = multiSep; } private String outSep; public void setOutSep(String outSep) { this.outSep = outSep; } @Override public void execute() throws BuildException { List&lt;String&gt; result = new ArrayList&lt;&gt;(); Map&lt;String, List&lt;String&gt;&gt; module2Paths = new HashMap&lt;&gt;(); for (String entry : value.split(Pattern.quote(entrySep))) { String[] keyValue = entry.split(Pattern.quote(valueSep), 2); if (keyValue.length == 1) { result.add(keyValue[0]); } else { module2Paths.computeIfAbsent(keyValue[0], s -&gt; new ArrayList&lt;&gt;()) .add(keyValue[1].trim()); } } module2Paths.entrySet() .stream() .forEach(e -&gt; result.add(e.getKey() + valueSep + e.getValue().stream().collect(Collectors.joining(multiSep)))); getProject().setProperty(property, result.stream().collect(Collectors.joining(" " + entrySep))); } } </echo> <echo file="${netbeans.modular.tasks.dir}/src/netbeans/ModsourceRegexp.java"> package netbeans; import java.util.ArrayList; import java.util.List; import java.util.Objects; import java.util.stream.Collectors; import org.apache.tools.ant.BuildException; import org.apache.tools.ant.Task; public class ModsourceRegexp extends Task { private String property; public void setProperty(String property) { this.property = property; } private String filePattern; public void setFilePattern(String filePattern) { this.filePattern = filePattern; } private String modsource; public void setModsource(String modsource) { this.modsource = modsource; } private List&lt;String&gt; expandGroup(String grp) { List&lt;String&gt; exp = new ArrayList&lt;&gt;(); String item = ""; int depth = 0; for (int i = 0; i &lt; grp.length(); i++) { char c = grp.charAt(i); switch (c) { case '{': if (depth++ == 0) { continue; } break; case '}': if (--depth == 0) { exp.add(item); continue; } break; case ',': if (depth == 1) { exp.add(item); item = ""; continue; } default: break; } item = item + c; } return exp; } private List&lt;String&gt; pathVariants(String spec) { return pathVariants(spec, new ArrayList&lt;&gt;()); } private List&lt;String&gt; pathVariants(String spec, List&lt;String&gt; res) { int start = spec.indexOf('{'); if (start == -1) { res.add(spec); return res; } int depth = 1; int end; for (end = start + 1; end &lt; spec.length() &amp;&amp; depth &gt; 0; end++) { char c = spec.charAt(end); switch (c) { case '{': depth++; break; case '}': depth--; break; } } String prefix = spec.substring(0, start); String suffix = spec.substring(end); expandGroup(spec.substring(start, end)).stream().forEach(item -&gt; { pathVariants(prefix + item + suffix, res); }); return res; } private String toRegexp2(String spec, String filepattern, String separator) { List&lt;String&gt; prefixes = new ArrayList&lt;&gt;(); List&lt;String&gt; suffixes = new ArrayList&lt;&gt;(); pathVariants(spec).forEach(item -&gt; { suffixes.add(item); }); String tail = ""; String separatorString = separator; if ("\\".equals(separatorString)) { separatorString = "\\\\"; } if (filepattern != null &amp;&amp; !Objects.equals(filepattern, tail)) { tail = separatorString + filepattern; } return "([^" + separatorString +"]+)\\Q" + separator + "\\E(" + suffixes.stream().collect(Collectors.joining("|")) + ")" + tail; } @Override public void execute() throws BuildException { getProject().setProperty(property, toRegexp2(modsource, filePattern, getProject().getProperty("file.separator"))); } } </echo> <echo file="${netbeans.modular.tasks.dir}/src/netbeans/ModuleInfoSelector.java"> package netbeans; import java.io.File; import java.util.Arrays; import org.apache.tools.ant.BuildException; import org.apache.tools.ant.types.selectors.BaseExtendSelector; public class ModuleInfoSelector extends BaseExtendSelector { @Override public boolean isSelected(File basedir, String filename, File file) throws BuildException { String extension = Arrays.stream(getParameters()) .filter(p -&gt; "extension".equals(p.getName())) .map(p -&gt; p.getValue()) .findAny() .get(); return !new File(file, "module-info." + extension).exists(); } } </echo> <mkdir dir="${netbeans.modular.tasks.dir}/out"/> <javac classpath="${ant.core.lib}" destdir="${netbeans.modular.tasks.dir}/out" srcdir="${netbeans.modular.tasks.dir}/src"/> </target> <target depends="-init-pre-project,-init-compile-netbeans-tasks" name="-init-project"> <taskdef classname="netbeans.CoalesceKeyvalue" classpath="${netbeans.modular.tasks.dir}/out" name="coalesce_keyvalue" uri="http://www.netbeans.org/ns/j2se-modular-project/1"/> <taskdef classname="netbeans.ModsourceRegexp" classpath="${netbeans.modular.tasks.dir}/out" name="modsource_regexp" uri="http://www.netbeans.org/ns/j2se-modular-project/1"/> </target> <target name="-init-source-module-properties"> <property name="javac.modulepath" value=""/> <property name="run.modulepath" value="${javac.modulepath}:${build.modules.dir}"/> <property name="debug.modulepath" value="${run.modulepath}"/> <property name="javac.upgrademodulepath" value=""/> <property name="run.upgrademodulepath" value="${javac.upgrademodulepath}"/> <condition else="" property="javac.systemmodulepath.cmd.line.arg" value="-system '${javac.systemmodulepath}'"> <and> <isset property="javac.systemmodulepath"/> <length length="0" string="${javac.systemmodulepath}" when="greater"/> </and> </condition> <property name="dist.jlink.dir" value="${dist.dir}/jlink"/> <property name="dist.jlink.output" value="${dist.jlink.dir}/${application.title}"/> </target> <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init"> <property name="platform.java" value="${java.home}/bin/java"/> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${test.src.dir.path}" property="have.tests.test.src.dir.regexp"/> <dirset dir="${basedir}/${test.src.dir}" id="have.tests.test.src.dir.set" includes="*/*"> <filename regex="${have.tests.test.src.dir.regexp}"/> </dirset> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${optional.test.dir.path}" property="have.tests.optional.test.dir.regexp"/> <dirset dir="${basedir}/${optional.test.dir}" id="have.tests.optional.test.dir.set" includes="*/*"> <filename regex="${have.tests.optional.test.dir.regexp}"/> </dirset> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${incubator.test.dir.path}" property="have.tests.incubator.test.dir.regexp"/> <dirset dir="${basedir}/${incubator.test.dir}" id="have.tests.incubator.test.dir.set" includes="*/*"> <filename regex="${have.tests.incubator.test.dir.regexp}"/> </dirset> <union id="have.tests.set"> <dirset refid="have.tests.test.src.dir.set"/> <dirset refid="have.tests.optional.test.dir.set"/> <dirset refid="have.tests.incubator.test.dir.set"/> </union> <condition property="have.tests"> <or> <resourcecount count="0" when="greater"> <union refid="have.tests.set"/> </resourcecount> <resourcecount count="0" when="greater"> <union refid="have.tests.set"/> </resourcecount> <resourcecount count="0" when="greater"> <union refid="have.tests.set"/> </resourcecount> </or> </condition> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${test.src.dir.path}" property="have.tests.test.src.dir.regexp"/> <dirset dir="${basedir}/${test.src.dir}" id="have.tests.test.src.dir.patchset" includes="*/*"> <filename regex="${have.tests.test.src.dir.regexp}"/> </dirset> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${optional.test.dir.path}" property="have.tests.optional.test.dir.regexp"/> <dirset dir="${basedir}/${optional.test.dir}" id="have.tests.optional.test.dir.patchset" includes="*/*"> <filename regex="${have.tests.optional.test.dir.regexp}"/> </dirset> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${incubator.test.dir.path}" property="have.tests.incubator.test.dir.regexp"/> <dirset dir="${basedir}/${incubator.test.dir}" id="have.tests.incubator.test.dir.patchset" includes="*/*"> <filename regex="${have.tests.incubator.test.dir.regexp}"/> </dirset> <union id="have.tests.patchset"> <dirset refid="have.tests.test.src.dir.patchset"/> <dirset refid="have.tests.optional.test.dir.patchset"/> <dirset refid="have.tests.incubator.test.dir.patchset"/> </union> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${src.dir.path}" property="have.sources.src.dir.regexp"/> <dirset dir="${basedir}/${src.dir}" id="have.sources.src.dir.set" includes="*/*"> <filename regex="${have.sources.src.dir.regexp}"/> </dirset> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${optional.main.dir.path}" property="have.sources.optional.main.dir.regexp"/> <dirset dir="${basedir}/${optional.main.dir}" id="have.sources.optional.main.dir.set" includes="*/*"> <filename regex="${have.sources.optional.main.dir.regexp}"/> </dirset> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" modsource="${incubator.main.dir.path}" property="have.sources.incubator.main.dir.regexp"/> <dirset dir="${basedir}/${incubator.main.dir}" id="have.sources.incubator.main.dir.set" includes="*/*"> <filename regex="${have.sources.incubator.main.dir.regexp}"/> </dirset> <union id="have.sources.set"> <dirset refid="have.sources.src.dir.set"/> <dirset refid="have.sources.optional.main.dir.set"/> <dirset refid="have.sources.incubator.main.dir.set"/> </union> <condition property="have.sources"> <or> <resourcecount count="0" when="greater"> <union refid="have.sources.set"/> </resourcecount> <resourcecount count="0" when="greater"> <union refid="have.sources.set"/> </resourcecount> <resourcecount count="0" when="greater"> <union refid="have.sources.set"/> </resourcecount> </or> </condition> <condition property="main.class.available"> <and> <isset property="main.class"/> <not> <equals arg1="${main.class}" arg2="" trim="true"/> </not> </and> </condition> <condition property="netbeans.home+have.tests"> <and> <isset property="netbeans.home"/> <isset property="have.tests"/> </and> </condition> <condition property="no.javadoc.preview"> <and> <isset property="javadoc.preview"/> <isfalse value="${javadoc.preview}"/> </and> </condition> <condition property="do.archive"> <or> <not> <istrue value="${jar.archive.disabled}"/> </not> <istrue value="${not.archive.disabled}"/> </or> </condition> <property name="run.jvmargs" value=""/> <property name="run.jvmargs.ide" value=""/> <property name="javac.compilerargs" value=""/> <property name="work.dir" value="${basedir}"/> <condition property="no.deps"> <and> <istrue value="${no.dependencies}"/> </and> </condition> <property name="javac.debug" value="true"/> <property name="javadoc.preview" value="true"/> <property name="application.args" value=""/> <property name="source.encoding" value="${file.encoding}"/> <property name="runtime.encoding" value="${source.encoding}"/> <condition property="javadoc.encoding.used" value="${javadoc.encoding}"> <and> <isset property="javadoc.encoding"/> <not> <equals arg1="${javadoc.encoding}" arg2=""/> </not> </and> </condition> <property name="javadoc.encoding.used" value="${source.encoding}"/> <property name="includes" value="**"/> <property name="excludes" value=""/> <property name="do.depend" value="false"/> <condition property="do.depend.true"> <istrue value="${do.depend}"/> </condition> <path id="endorsed.classpath.path" path="${endorsed.classpath}"/> <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'"> <and> <isset property="endorsed.classpath"/> <not> <equals arg1="${endorsed.classpath}" arg2="" trim="true"/> </not> </and> </condition> <condition else="" property="javac.profile.cmd.line.arg" value="-profile ${javac.profile}"> <isset property="profile.available"/> </condition> <condition else="false" property="jdkBug6558476"> <and> <matches pattern="1\.[56]" string="${java.specification.version}"/> <not> <os family="unix"/> </not> </and> </condition> <condition else="false" property="javac.fork"> <or> <istrue value="${jdkBug6558476}"/> <istrue value="${javac.external.vm}"/> </or> </condition> <condition property="main.class.check.available"> <and> <isset property="libs.CopyLibs.classpath"/> <available classname="org.netbeans.modules.java.j2seproject.moduletask.ModuleMainClass" classpath="${libs.CopyLibs.classpath}"/> </and> </condition> <property name="jar.index" value="false"/> <property name="jar.index.metainf" value="${jar.index}"/> <condition property="junit.available"> <or> <available classname="org.junit.Test" classpath="${run.test.classpath}"/> <available classname="junit.framework.Test" classpath="${run.test.classpath}"/> </or> </condition> <condition property="testng.available"> <available classname="org.testng.annotations.Test" classpath="${run.test.classpath}"/> </condition> <condition property="junit+testng.available"> <and> <istrue value="${junit.available}"/> <istrue value="${testng.available}"/> </and> </condition> <condition else="testng" property="testng.mode" value="mixed"> <istrue value="${junit+testng.available}"/> </condition> <condition else="" property="testng.debug.mode" value="-mixed"> <istrue value="${junit+testng.available}"/> </condition> <property name="java.failonerror" value="true"/> <macrodef name="for-paths" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute name="paths"/> <attribute default="${path.separator}" name="separator"/> <element implicit="yes" name="call"/> <sequential> <local name="entry"/> <local name="tail"/> <local name="moreElements"/> <loadresource property="entry" quiet="true" unless:blank="@{paths}"> <concat>@{paths}</concat> <filterchain> <replaceregex pattern="([^@{separator}]*)\Q@{separator}\E.*" replace="\1"/> </filterchain> </loadresource> <sequential if:set="entry"> <call/> </sequential> <condition else="false" property="moreElements" value="true"> <contains string="@{paths}" substring="@{separator}"/> </condition> <loadresource if:true="${moreElements}" property="tail" quiet="true"> <concat>@{paths}</concat> <filterchain> <replaceregex pattern="[^@{separator}]*\Q@{separator}\E(.*)" replace="\1"/> </filterchain> </loadresource> <j2semodularproject1:for-paths xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" if:true="${moreElements}" paths="${tail}"> <call/> </j2semodularproject1:for-paths> </sequential> </macrodef> <property name="modules.supported.internal" value="true"/> <condition else="${file.separator}" property="file.separator.string" value="\${file.separator}"> <equals arg1="${file.separator}" arg2="\"/> </condition> </target> <target name="-post-init"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check"> <fail unless="src.dir">Must set src.dir</fail> <fail unless="optional.main.dir">Must set optional.main.dir</fail> <fail unless="incubator.main.dir">Must set incubator.main.dir</fail> <fail unless="test.src.dir">Must set test.src.dir</fail> <fail unless="optional.test.dir">Must set optional.test.dir</fail> <fail unless="incubator.test.dir">Must set incubator.test.dir</fail> <fail unless="build.dir">Must set build.dir</fail> <fail unless="dist.dir">Must set dist.dir</fail> <fail unless="build.modules.dir">Must set build.modules.dir</fail> <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail> <fail unless="build.test.modules.dir">Must set build.test.modules.dir</fail> <fail unless="build.test.results.dir">Must set build.test.results.dir</fail> <fail unless="build.classes.excludes">Must set build.classes.excludes</fail> <fail message="Java 9 support requires Ant 1.10.0 or higher."> <condition> <not> <antversion atleast="1.10.0"/> </not> </condition> </fail> </target> <target name="-init-macrodef-property"> <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute name="name"/> <attribute name="value"/> <sequential> <property name="@{name}" value="${@{value}}"/> </sequential> </macrodef> </target> <target depends="-init-ap-cmdline-properties,-init-source-module-properties" name="-init-macrodef-javac"> <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${build.modules.dir}" name="destdir"/> <attribute default="${javac.classpath}" name="classpath"/> <attribute default="${javac.modulepath}" name="modulepath"/> <attribute default="${src.dir}/*/${src.dir.path}:${optional.main.dir}/*/${optional.main.dir.path}:${incubator.main.dir}/*/${incubator.main.dir.path}" name="modulesourcepath"/> <attribute default="${javac.upgrademodulepath}" name="upgrademodulepath"/> <attribute default="${javac.processorpath}" name="processorpath"/> <attribute default="${javac.processormodulepath}" name="processormodulepath"/> <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="${javac.debug}" name="debug"/> <attribute default="${empty.dir}" name="gensrcdir"/> <element name="customize" optional="true"/> <sequential> <property location="${build.dir}/empty" name="empty.dir"/> <mkdir dir="${empty.dir}"/> <mkdir dir="@{apgeneratedsrcdir}"/> <condition property="processormodulepath.set"> <resourcecount count="0" when="greater"> <path> <pathelement path="@{processormodulepath}"/> </path> </resourcecount> </condition> <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" release="${javac.source}" tempdir="${java.io.tmpdir}"> <classpath> <path path="@{classpath}"/> </classpath> <modulepath> <path path="@{modulepath}"/> </modulepath> <modulesourcepath> <path path="@{modulesourcepath}"/> </modulesourcepath> <upgrademodulepath> <path path="@{upgrademodulepath}"/> </upgrademodulepath> <compilerarg line="${javac.systemmodulepath.cmd.line.arg}"/> <compilerarg line="${javac.profile.cmd.line.arg}"/> <compilerarg line="${javac.compilerargs}"/> <compilerarg if:set="processormodulepath.set" value="--processor-module-path"/> <compilerarg if:set="processormodulepath.set" path="@{processormodulepath}"/> <compilerarg unless:set="processormodulepath.set" value="-processorpath"/> <compilerarg path="@{processorpath}:${empty.dir}" unless:set="processormodulepath.set"/> <compilerarg line="${ap.processors.internal}"/> <compilerarg line="${annotation.processing.processor.options}"/> <compilerarg value="-s"/> <compilerarg path="@{apgeneratedsrcdir}"/> <compilerarg line="${ap.proc.none.internal}"/> <customize/> </javac> </sequential> </macrodef> </target> <target depends="-init-macrodef-javac" name="-init-macrodef-javac-depend"> <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${src.dir}:${optional.main.dir}:${incubator.main.dir}" name="srcdir"/> <attribute default="${build.classes.dir}" name="destdir"/> <attribute default="${javac.classpath}" name="classpath"/> <sequential> <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}"> <classpath> <path path="@{classpath}"/> </classpath> </depend> </sequential> </macrodef> <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${build.modules.dir}" name="destdir"/> <sequential> <fail unless="javac.includes">Must set javac.includes</fail> <pathconvert pathsep="${line.separator}" property="javac.includes.binary"> <path> <filelist dir="@{destdir}" files="${javac.includes}"/> </path> <globmapper from="*.java" to="*.class"/> </pathconvert> <tempfile deleteonexit="true" property="javac.includesfile.binary"/> <echo file="${javac.includesfile.binary}" message="${javac.includes.binary}"/> <delete> <files includesfile="${javac.includesfile.binary}"/> </delete> <delete> <fileset file="${javac.includesfile.binary}"/> </delete> </sequential> </macrodef> </target> <target if="${junit.available}" name="-init-macrodef-junit-init"> <condition else="false" property="nb.junit.batch" value="true"> <and> <istrue value="${junit.available}"/> <not> <isset property="test.method"/> </not> </and> </condition> <condition else="false" property="nb.junit.single" value="true"> <and> <istrue value="${junit.available}"/> <isset property="test.method"/> </and> </condition> </target> <target name="-init-test-properties"> <property name="test.binaryincludes" value="&lt;nothing&gt;"/> <property name="test.binarytestincludes" value=""/> <property name="test.binaryexcludes" value=""/> </target> <target name="-init-macrodef-junit-prototype"> <macrodef name="junit-prototype" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <element name="customizePrototype" optional="true"/> <sequential> <property location="${build.dir}/empty" name="empty.dir"/> <property name="junit.forkmode" value="perTest"/> <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" forkmode="${junit.forkmode}" showoutput="true" tempdir="${build.dir}"> <syspropertyset> <propertyref prefix="test-sys-prop."/> <mapper from="test-sys-prop.*" to="*" type="glob"/> </syspropertyset> <classpath> <path path="${run.test.classpath}"/> </classpath> <formatter type="brief" usefile="false"/> <formatter type="xml"/> <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> <jvmarg value="-ea"/> <jvmarg value="--module-path"/> <jvmarg path="${run.modulepath}${path.separator}${run.test.modulepath}${path.separator}${empty.dir}"/> <jvmarg line="${run.test.jvmargs}"/> <customizePrototype/> </junit> </sequential> </macrodef> </target> <target depends="-init-test-properties,-init-macrodef-junit-prototype" if="${nb.junit.single}" name="-init-macrodef-junit-single" unless="${nb.junit.batch}"> <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <element name="customize" optional="true"/> <sequential> <j2semodularproject1:junit-prototype xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1"> <customizePrototype> <test methods="@{testmethods}" name="@{testincludes}" todir="${build.test.results.dir}"/> <customize/> </customizePrototype> </j2semodularproject1:junit-prototype> </sequential> </macrodef> </target> <target depends="-init-test-properties,-init-macrodef-junit-prototype" if="${nb.junit.batch}" name="-init-macrodef-junit-batch" unless="${nb.junit.single}"> <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <element name="customize" optional="true"/> <sequential> <j2semodularproject1:junit-prototype xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1"> <customizePrototype> <batchtest todir="${build.test.results.dir}"> <mappedresources> <union> <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="**/@{includes}"> <filename name="**/@{testincludes}"/> <filename regex="${have.tests.test.src.dir.regexp}"/> </fileset> <fileset dir="${optional.test.dir}" excludes="@{excludes},${excludes}" includes="**/@{includes}"> <filename name="**/@{testincludes}"/> <filename regex="${have.tests.optional.test.dir.regexp}"/> </fileset> <fileset dir="${incubator.test.dir}" excludes="@{excludes},${excludes}" includes="**/@{includes}"> <filename name="**/@{testincludes}"/> <filename regex="${have.tests.incubator.test.dir.regexp}"/> </fileset> </union> <regexpmapper from="${have.tests.test.src.dir.regexp}\Q${file.separator}\E(.*)$" to="\3"/> <regexpmapper from="${have.tests.optional.test.dir.regexp}\Q${file.separator}\E(.*)$" to="\3"/> <regexpmapper from="${have.tests.incubator.test.dir.regexp}\Q${file.separator}\E(.*)$" to="\3"/> </mappedresources> <fileset dir="${build.test.modules.dir}" excludes="@{excludes},${excludes},${test.binaryexcludes}" includes="${test.binaryincludes}"> <filename name="${test.binarytestincludes}"/> </fileset> </batchtest> <customize/> </customizePrototype> </j2semodularproject1:junit-prototype> </sequential> </macrodef> </target> <target depends="-init-macrodef-junit-init,-init-macrodef-junit-single, -init-macrodef-junit-batch" if="${junit.available}" name="-init-macrodef-junit"/> <target if="${testng.available}" name="-init-macrodef-testng"> <macrodef name="testng" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <element name="customize" optional="true"/> <sequential> <condition else="" property="testng.methods.arg" value="@{testincludes}.@{testmethods}"> <isset property="test.method"/> </condition> <union id="test.set"> <fileset dir="${test.src.dir}" excludes="@{excludes},**/*.xml,${excludes}" includes="@{includes}"> <filename name="@{testincludes}"/> </fileset> <fileset dir="${optional.test.dir}" excludes="@{excludes},**/*.xml,${excludes}" includes="@{includes}"> <filename name="@{testincludes}"/> </fileset> <fileset dir="${incubator.test.dir}" excludes="@{excludes},**/*.xml,${excludes}" includes="@{includes}"> <filename name="@{testincludes}"/> </fileset> </union> <taskdef classname="org.testng.TestNGAntTask" classpath="${run.test.classpath}" name="testng"/> <testng classfilesetref="test.set" failureProperty="tests.failed" listeners="org.testng.reporters.VerboseReporter" methods="${testng.methods.arg}" mode="${testng.mode}" outputdir="${build.test.results.dir}" suitename="Apache_SIS_on_GeoAPI_3.0" testname="TestNG tests" workingDir="${work.dir}"> <xmlfileset dir="${build.test.classes.dir}" includes="@{testincludes}"/> <propertyset> <propertyref prefix="test-sys-prop."/> <mapper from="test-sys-prop.*" to="*" type="glob"/> </propertyset> <classpath> <path path="${run.test.classpath}"/> </classpath> <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> <customize/> </testng> </sequential> </macrodef> </target> <target name="-init-macrodef-test-impl"> <macrodef name="test-impl" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <element implicit="true" name="customize" optional="true"/> <sequential> <echo>No tests executed.</echo> </sequential> </macrodef> </target> <target depends="-init-macrodef-junit" if="${junit.available}" name="-init-macrodef-junit-impl"> <macrodef name="test-impl" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <element implicit="true" name="customize" optional="true"/> <sequential> <j2semodularproject1:junit xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="@{excludes}" includes="@{includes}" testincludes="@{testincludes}" testmethods="@{testmethods}"> <customize/> </j2semodularproject1:junit> </sequential> </macrodef> </target> <target depends="-init-macrodef-testng" if="${testng.available}" name="-init-macrodef-testng-impl"> <macrodef name="test-impl" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <element implicit="true" name="customize" optional="true"/> <sequential> <j2semodularproject1:testng xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="@{excludes}" includes="@{includes}" testincludes="@{testincludes}" testmethods="@{testmethods}"> <customize/> </j2semodularproject1:testng> </sequential> </macrodef> </target> <target depends="-init-macrodef-test-impl,-init-macrodef-junit-impl,-init-macrodef-testng-impl" name="-init-macrodef-test"> <macrodef name="test" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <sequential> <j2semodularproject1:test-impl xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="@{excludes}" includes="@{includes}" testincludes="@{testincludes}" testmethods="@{testmethods}"> <customize> <jvmarg line="${run.jvmargs}"/> <jvmarg line="${run.jvmargs.ide}"/> </customize> </j2semodularproject1:test-impl> </sequential> </macrodef> </target> <target depends="-init-macrodef-junit" if="${junit.available}" name="-init-macrodef-junit-debug-impl"> <macrodef name="test-debug-impl" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <element name="customizeDebuggee" optional="true"/> <sequential> <j2semodularproject1:junit xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="@{excludes}" includes="@{includes}" testincludes="@{testincludes}" testmethods="@{testmethods}"> <customize> <jvmarg value="-agentlib:jdwp=transport=${debug-transport},address=${jpda.address}"/> <customizeDebuggee/> </customize> </j2semodularproject1:junit> </sequential> </macrodef> </target> <target if="${testng.available}" name="-init-macrodef-testng-debug"> <macrodef name="testng-debug" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${main.class}" name="testClass"/> <attribute default="" name="testMethod"/> <element name="customize2" optional="true"/> <sequential> <condition else="-testclass @{testClass}" property="test.class.or.method" value="-methods @{testClass}.@{testMethod}"> <isset property="test.method"/> </condition> <condition else="-suitename Apache_SIS_on_GeoAPI_3.0 -testname @{testClass} ${test.class.or.method}" property="testng.cmd.args" value="@{testClass}"> <matches pattern=".*\.xml" string="@{testClass}"/> </condition> <delete dir="${build.test.results.dir}" quiet="true"/> <mkdir dir="${build.test.results.dir}"/> <j2semodularproject1:debug xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classname="org.testng.TestNG" classpath="${debug.test.classpath}"> <customizeDebuggee> <customize2/> <jvmarg value="-ea"/> <arg line="${testng.debug.mode}"/> <arg line="-d ${build.test.results.dir}"/> <arg line="-listener org.testng.reporters.VerboseReporter"/> <arg line="${testng.cmd.args}"/> </customizeDebuggee> </j2semodularproject1:debug> </sequential> </macrodef> </target> <target depends="-init-macrodef-testng-debug" if="${testng.available}" name="-init-macrodef-testng-debug-impl"> <macrodef name="testng-debug-impl" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${main.class}" name="testClass"/> <attribute default="" name="testMethod"/> <element implicit="true" name="customize2" optional="true"/> <sequential> <j2semodularproject1:testng-debug xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" testClass="@{testClass}" testMethod="@{testMethod}"> <customize2/> </j2semodularproject1:testng-debug> </sequential> </macrodef> </target> <target depends="-init-macrodef-junit-debug-impl" if="${junit.available}" name="-init-macrodef-test-debug-junit"> <macrodef name="test-debug" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <attribute default="${main.class}" name="testClass"/> <attribute default="" name="testMethod"/> <sequential> <j2semodularproject1:test-debug-impl xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="@{excludes}" includes="@{includes}" testincludes="@{testincludes}" testmethods="@{testmethods}"> <customizeDebuggee> <jvmarg line="${run.jvmargs}"/> <jvmarg line="${run.jvmargs.ide}"/> </customizeDebuggee> </j2semodularproject1:test-debug-impl> </sequential> </macrodef> </target> <target depends="-init-macrodef-testng-debug-impl" if="${testng.available}" name="-init-macrodef-test-debug-testng"> <macrodef name="test-debug" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <attribute default="**" name="testincludes"/> <attribute default="" name="testmethods"/> <attribute default="${main.class}" name="testClass"/> <attribute default="" name="testMethod"/> <sequential> <j2semodularproject1:testng-debug-impl xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" testClass="@{testClass}" testMethod="@{testMethod}"> <customize2> <syspropertyset> <propertyref prefix="test-sys-prop."/> <mapper from="test-sys-prop.*" to="*" type="glob"/> </syspropertyset> </customize2> </j2semodularproject1:testng-debug-impl> </sequential> </macrodef> </target> <target depends="-init-macrodef-test-debug-junit,-init-macrodef-test-debug-testng" name="-init-macrodef-test-debug"/> <!-- pre NB7.2 profiling section; consider it deprecated --> <target depends="-profile-pre-init, init, -profile-post-init, -profile-init-macrodef-profile, -profile-init-check" if="profiler.info.jvmargs.agent" name="profile-init"/> <target if="profiler.info.jvmargs.agent" name="-profile-pre-init"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target if="profiler.info.jvmargs.agent" name="-profile-post-init"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target if="profiler.info.jvmargs.agent" name="-profile-init-macrodef-profile"> <macrodef name="resolve"> <attribute name="name"/> <attribute name="value"/> <sequential> <property name="@{name}" value="${env.@{value}}"/> </sequential> </macrodef> <macrodef name="profile"> <attribute default="${main.class}" name="classname"/> <element name="customize" optional="true"/> <sequential> <property environment="env"/> <resolve name="profiler.current.path" value="${profiler.info.pathvar}"/> <java classname="@{classname}" dir="${profiler.info.dir}" failonerror="${java.failonerror}" fork="true" jvm="${profiler.info.jvm}"> <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> <jvmarg value="${profiler.info.jvmargs.agent}"/> <jvmarg line="${profiler.info.jvmargs}"/> <env key="${profiler.info.pathvar}" path="${profiler.info.agentpath}:${profiler.current.path}"/> <arg line="${application.args}"/> <classpath> <path path="${run.classpath}"/> </classpath> <syspropertyset> <propertyref prefix="run-sys-prop."/> <mapper from="run-sys-prop.*" to="*" type="glob"/> </syspropertyset> <customize/> </java> </sequential> </macrodef> </target> <target depends="-profile-pre-init, init, -profile-post-init, -profile-init-macrodef-profile" if="profiler.info.jvmargs.agent" name="-profile-init-check"> <fail unless="profiler.info.jvm">Must set JVM to use for profiling in profiler.info.jvm</fail> <fail unless="profiler.info.jvmargs.agent">Must set profiler agent JVM arguments in profiler.info.jvmargs.agent</fail> </target> <!-- end of pre NB7.2 profiling section --> <target depends="-init-debug-args" name="-init-macrodef-nbjpda"> <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${main.class}" name="name"/> <attribute default="${debug.modulepath}" name="modulepath"/> <attribute default="${debug.classpath}" name="classpath"/> <attribute default="" name="stopclassname"/> <sequential> <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}"> <modulepath> <path path="@{modulepath}"/> </modulepath> <classpath> <path path="@{classpath}"/> </classpath> </nbjpdastart> </sequential> </macrodef> <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${debug.modules.dir}" name="dir"/> <sequential> <nbjpdareload> <fileset dir="@{dir}" includes="${fix.classes}"> <include name="*/${fix.includes}*.class"/> </fileset> </nbjpdareload> </sequential> </macrodef> </target> <target name="-init-debug-args"> <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem"> <os family="windows"/> </condition> <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}"> <isset property="debug.transport"/> </condition> </target> <target depends="-init-debug-args" name="-init-macrodef-debug"> <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${module.name}" name="modulename"/> <attribute default="${main.class}" name="classname"/> <attribute default="${debug.modulepath}" name="modulepath"/> <attribute default="${debug.classpath}" name="classpath"/> <element name="customizeDebuggee" optional="true"/> <sequential> <j2semodularproject1:java xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classname="@{classname}" classpath="@{classpath}" modulename="@{modulename}" modulepath="@{modulepath}"> <customize> <jvmarg value="-agentlib:jdwp=transport=${debug-transport},address=${jpda.address}"/> <customizeDebuggee/> </customize> </j2semodularproject1:java> </sequential> </macrodef> </target> <target depends="-init-source-module-properties" name="-init-macrodef-java"> <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${module.name}" name="modulename"/> <attribute default="${main.class}" name="classname"/> <attribute default="${run.modulepath}" name="modulepath"/> <attribute default="${run.upgrademodulepath}" name="upgrademodulepath"/> <attribute default="${run.classpath}" name="classpath"/> <attribute default="jvm" name="jvm"/> <element name="customize" optional="true"/> <sequential> <java classname="@{classname}" dir="${work.dir}" failonerror="${java.failonerror}" fork="true" module="@{modulename}"> <classpath> <path path="@{classpath}"/> </classpath> <modulepath> <path path="@{modulepath}"/> </modulepath> <upgrademodulepath> <path path="@{upgrademodulepath}"/> </upgrademodulepath> <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> <jvmarg line="${run.jvmargs}"/> <jvmarg line="${run.jvmargs.ide}"/> <syspropertyset> <propertyref prefix="run-sys-prop."/> <mapper from="run-sys-prop.*" to="*" type="glob"/> </syspropertyset> <customize/> </java> </sequential> </macrodef> </target> <target name="-init-presetdef-jar"> <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <jar compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}" manifestencoding="UTF-8"> <j2semodularproject1:fileset xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" dir="${build.classes.dir}" excludes="${dist.archive.excludes}"/> </jar> </presetdef> </target> <target name="-init-ap-cmdline-properties"> <property name="annotation.processing.enabled" value="true"/> <property name="annotation.processing.processors.list" value=""/> <property name="annotation.processing.processor.options" value=""/> <property name="annotation.processing.run.all.processors" value="true"/> <property name="javac.processorpath" value="${javac.classpath}"/> <property name="javac.test.processorpath" value="${javac.test.classpath}"/> </target> <target depends="-init-ap-cmdline-properties" name="-init-ap-cmdline-supported"> <condition else="" property="ap.processors.internal" value="-processor ${annotation.processing.processors.list}"> <isfalse value="${annotation.processing.run.all.processors}"/> </condition> <condition else="" property="ap.proc.none.internal" value="-proc:none"> <isfalse value="${annotation.processing.enabled}"/> </condition> </target> <target depends="-init-ap-cmdline-properties,-init-ap-cmdline-supported" name="-init-ap-cmdline"> <property name="ap.cmd.line.internal" value=""/> </target> <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac-depend,-init-macrodef-test,-init-macrodef-test-debug,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar,-init-ap-cmdline" name="init"/> <!-- =================== COMPILATION SECTION =================== --> <target name="-deps-jar-init" unless="built-jar.properties"> <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/> <delete file="${built-jar.properties}" quiet="true"/> </target> <target if="already.built.jar.${basedir}" name="-warn-already-built-jar"> <echo level="warn" message="Cycle detected: Apache SIS on GeoAPI 3.0 was already built"/> </target> <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps"> <mkdir dir="${build.dir}"/> <touch file="${built-jar.properties}" verbose="false"/> <property file="${built-jar.properties}" prefix="already.built.jar."/> <antcall target="-warn-already-built-jar"/> <propertyfile file="${built-jar.properties}"> <entry key="${basedir}" value=""/> </propertyfile> </target> <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/> <target depends="init" name="-check-automatic-build"> <available file="${build.modules.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/> </target> <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build"> <antcall target="clean"> <param name="no.dependencies" value="true"/> </antcall> </target> <target name="-pre-pre-compile"> <mkdir dir="${build.modules.dir}"/> </target> <target name="-pre-compile"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target if="do.depend.true" name="-compile-depend"> <pathconvert property="build.generated.subdirs"> <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false"> <include name="*"/> </dirset> </pathconvert> <j2semodularproject1:depend xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" srcdir="${src.dir}:${optional.main.dir}:${incubator.main.dir}:${build.generated.subdirs}"/> </target> <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-compile-depend" if="have.sources" name="-do-compile"> <j2semodularproject1:javac xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" gensrcdir="${build.generated.sources.dir}"/> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${src.dir.path}" property="src.dir.path.regexp"/> <echo message="Copying resources from ${src.dir}"/> <copy todir="${build.modules.dir}"> <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${src.dir.path.regexp}" to="\1/\3"/> </copy> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${optional.main.dir.path}" property="optional.main.dir.path.regexp"/> <echo message="Copying resources from ${optional.main.dir}"/> <copy todir="${build.modules.dir}"> <fileset dir="${optional.main.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${optional.main.dir.path.regexp}" to="\1/\3"/> </copy> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${incubator.main.dir.path}" property="incubator.main.dir.path.regexp"/> <echo message="Copying resources from ${incubator.main.dir}"/> <copy todir="${build.modules.dir}"> <fileset dir="${incubator.main.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${incubator.main.dir.path.regexp}" to="\1/\3"/> </copy> </target> <target if="has.persistence.xml" name="-copy-persistence-xml"> <fail message="XXX: Not supported on MM projects"/> <mkdir dir="${build.classes.dir}/META-INF"/> <copy todir="${build.classes.dir}/META-INF"> <fileset dir="${meta.inf.dir}" includes="persistence.xml orm.xml"/> </copy> </target> <target name="-post-compile"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/> <target name="-pre-compile-single"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init,deps-jar" name="-do-compile-single"> <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> <j2semodularproject1:force-recompile xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1"/> <j2semodularproject1:javac xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}, module-info.java"/> </target> <target name="-post-compile-single"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/> <!-- ==================== JAR BUILDING SECTION ==================== --> <target depends="init,compile" name="-check-module-main-class"> <condition property="do.module.main.class"> <and> <available file="${module.dir}/module-info.class"/> <isset property="main.class.check.available"/> </and> </condition> </target> <target depends="init" name="-pre-pre-jar"> <dirname file="${dist.jar}" property="dist.jar.dir"/> <mkdir dir="${dist.jar.dir}"/> </target> <target name="-pre-jar"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target name="-pre-single-jar"/> <target depends="-pre-single-jar" if="module.jar.filename" name="-make-single-jar"> <jar basedir="${module.dir}" compress="${jar.compress}" destfile="${dist.dir}/${module.jar.filename}" excludes="${dist.archive.excludes}" manifestencoding="UTF-8"/> </target> <target depends="init,compile,-pre-pre-jar,-pre-jar,-main-module-check-condition" if="do.archive" name="-do-jar-jar" unless="do.mkdist"> <property location="${build.modules.dir}" name="build.modules.dir.resolved"/> <dirset dir="${build.modules.dir.resolved}" id="do.jar.dirs" includes="*"/> <pathconvert property="do.jar.dir.list" refid="do.jar.dirs"> <identitymapper/> </pathconvert> <j2semodularproject1:for-paths xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" paths="${do.jar.dir.list}"> <local name="module.jar.filename"/> <local name="module.jar.name.tmp"/> <basename file="${entry}" property="module.jar.name.tmp"/> <property name="module.jar.filename" value="${module.jar.name.tmp}.jar"/> <antcall inheritRefs="true" target="-make-single-jar"> <param name="module.jar.filename" value="${module.jar.filename}"/> <param location="${entry}" name="module.dir"/> </antcall> </j2semodularproject1:for-paths> <condition property="named.module.internal"> <and> <isset property="module.name"/> <length length="0" string="${module.name}" when="greater"/> </and> </condition> <condition property="unnamed.module.internal"> <not> <isset property="named.module.internal"/> </not> </condition> <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> <property location="${dist.jar}" name="dist.jar.resolved"/> <pathconvert property="run.classpath.with.dist.jar"> <path path="${run.classpath}"/> <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/> </pathconvert> <pathconvert property="run.modulepath.with.dist.jar"> <path path="${run.modulepath}"/> <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/> </pathconvert> <condition else="" property="jar.usage.message.module.path" value=" --module-path ${run.modulepath.with.dist.jar}"> <and> <isset property="modules.supported.internal"/> <length length="0" string="${run.modulepath.with.dist.jar}" when="greater"/> </and> </condition> <condition else="" property="jar.usage.message.class.path" value=" -cp ${run.classpath.with.dist.jar}"> <length length="0" string="${run.classpath.with.dist.jar}" when="greater"/> </condition> <condition else=" ${main.class}" property="jar.usage.message.main.class" value=" -m ${module.name}/${main.class}"> <isset property="named.module.internal"/> </condition> <condition else="" property="jar.usage.message" value="To run this application from the command line without Ant, try:${line.separator}${platform.java}${jar.usage.message.module.path}${jar.usage.message.class.path}${jar.usage.message.main.class}"> <isset property="main.class.available"/> </condition> <condition else="debug" property="jar.usage.level" value="info"> <isset property="main.class.available"/> </condition> <echo level="${jar.usage.level}" message="${jar.usage.message}"/> </target> <target depends="init,compile,-pre-pre-jar,-pre-jar,-do-jar-jar" name="-do-jar-without-libraries"/> <target depends="init,compile,-pre-pre-jar,-pre-jar" name="-do-jar-with-libraries"/> <target name="-post-jar"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init,compile,-pre-jar,-do-jar-without-libraries,-do-jar-with-libraries,-post-jar" name="-do-jar"/> <target depends="init,compile,-pre-jar,-do-jar,-post-jar,deploy" description="Build JAR." name="jar"/> <!-- ================= DEPLOY SECTION ================= --> <target name="-pre-deploy"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init" name="-check-jlink"> <condition property="do.jlink.internal"> <and> <istrue value="${do.jlink}"/> <isset property="do.archive"/> </and> </condition> </target> <target depends="init,-do-jar,-post-jar,-pre-deploy,-check-jlink,-main-module-set" if="do.jlink.internal" name="-do-deploy"> <delete dir="${dist.jlink.dir}" failonerror="false" quiet="true"/> <property name="jlink.launcher.name" value="${application.title}"/> <pathconvert pathsep="," property="jlink.modulelist.internal"> <fileset dir="${dist.dir}" includes="*.jar"/> <mapper> <chainedmapper> <flattenmapper/> <globmapper from="*.jar" to="*"/> </chainedmapper> </mapper> </pathconvert> <condition else="${jlink.modulelist.internal}" property="jlink.add.modules" value="${jlink.modulelist.internal},${jlink.additionalmodules}"> <and> <isset property="jlink.additionalmodules"/> <length length="0" string="${jlink.additionalmodules}" when="greater"/> </and> </condition> <condition property="jlink.do.strip.internal"> <and> <isset property="jlink.strip"/> <istrue value="${jlink.strip}"/> </and> </condition> <condition property="jlink.do.additionalparam.internal"> <and> <isset property="jlink.additionalparam"/> <length length="0" string="${jlink.additionalparam}" when="greater"/> </and> </condition> <condition property="jlink.do.launcher.internal"> <and> <istrue value="${jlink.launcher}"/> <isset property="module.name"/> <length length="0" string="${module.name}" when="greater"/> <isset property="main.class.available"/> </and> </condition> <property name="platform.jlink" value="${jdk.home}/bin/jlink"/> <property name="jlink.systemmodules.internal" value="${jdk.home}/jmods"/> <exec executable="${platform.jlink}"> <arg value="--module-path"/> <arg path="${jlink.systemmodules.internal}:${run.modulepath}:${dist.dir}"/> <arg value="--add-modules"/> <arg value="${jlink.add.modules}"/> <arg if:set="jlink.do.strip.internal" value="--strip-debug"/> <arg if:set="jlink.do.launcher.internal" value="--launcher"/> <arg if:set="jlink.do.launcher.internal" value="${jlink.launcher.name}=${module.name}/${main.class}"/> <arg if:set="jlink.do.additionalparam.internal" line="${jlink.additionalparam}"/> <arg value="--output"/> <arg value="${dist.jlink.output}"/> </exec> </target> <target name="-post-deploy"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="-do-jar,-post-jar,-pre-deploy,-do-deploy,-post-deploy" name="deploy"/> <!-- ================= EXECUTION SECTION ================= --> <target name="-check-main-class"> <fail unless="main.class">No main class specified</fail> </target> <target depends="init,compile,-check-main-class,-main-module-check" description="Run a main class." name="run"> <property name="main.class.relativepath" refid="main.class.relativepath"/> <pathconvert pathsep="," property="src.dir.list" refid="have.sources.set"/> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${src.dir.path}" property="run.src.dir.path.regexp"/> <j2semodularproject1:java xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1"> <customize> <arg line="${application.args}"/> </customize> </j2semodularproject1:java> </target> <target name="-main-module-set" unless="module.name"> <condition else="${main.class}" property="check.class.name" value="${run.class}"> <isset property="run.class"/> </condition> <condition property="run.modules.dir" value="${build.modules.dir}"> <not> <isset property="run.modules.dir"/> </not> </condition> <resources id="main.class.relativepath"> <mappedresources> <string value="${check.class.name}"/> <unpackagemapper from="*" to="*.class"/> </mappedresources> </resources> <property location="${run.modules.dir}" name="run.modules.dir.location"/> <pathconvert property="module.name"> <fileset dir="${run.modules.dir}" includes="**/${toString:main.class.relativepath}"/> <regexpmapper from="\Q${run.modules.dir.location}${file.separator}\E([^${file.separator.string}]+)\Q${file.separator}\E.*\.class" to="\1"/> </pathconvert> </target> <target depends="-main-module-set" name="-main-module-check"> <fail message="Could not determine module of the main class and module.name is not set"> <condition> <or> <not> <isset property="module.name"/> </not> <length length="0" string="${module.name}" when="equal"/> </or> </condition> </fail> </target> <target depends="-main-module-set" if="main.class.available" name="-main-module-check-condition"> <fail message="Could not determine module of the main class and module.name is not set"> <condition> <or> <not> <isset property="module.name"/> </not> <length length="0" string="${module.name}" when="equal"/> </or> </condition> </fail> </target> <target name="-do-not-recompile"> <property name="javac.includes.binary" value=""/> </target> <target depends="init,compile-single,-main-module-check" name="run-single"> <fail unless="run.class">Must select one file in the IDE or set run.class</fail> <j2semodularproject1:java xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classname="${run.class}"/> </target> <target depends="init,compile-test-single,-init-test-run-module-properties,-main-module-check" name="run-test-with-main"> <fail unless="run.class">Must select one file in the IDE or set run.class</fail> <j2semodularproject1:java xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classname="${run.class}" classpath="${run.test.classpath}" modulepath="${run.test.modulepath}"> <customize> <jvmarg line="${run.test.jvmargs}"/> </customize> </j2semodularproject1:java> </target> <!-- ================= DEBUGGING SECTION ================= --> <target name="-debug-init"> <condition else="${main.class}" property="run.class" value="${debug.class}"> <isset property="debug.class"/> </condition> <fail message="debug.class or main.class property is not set" unless="run.class"/> </target> <target depends="init,-debug-init,-main-module-check" if="netbeans.home" name="-debug-start-debugger"> <j2semodularproject1:nbjpdastart xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" name="${debug.class}"/> </target> <target depends="init,-debug-init,-main-module-check" if="netbeans.home" name="-debug-start-debugger-main-test"> <j2semodularproject1:nbjpdastart xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classpath="${debug.test.classpath}" name="${debug.class}"/> </target> <target depends="init,compile,-debug-init,-main-module-check" name="-debug-start-debuggee"> <j2semodularproject1:debug xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classname="${run.class}"> <customizeDebuggee> <arg line="${application.args}"/> </customizeDebuggee> </j2semodularproject1:debug> </target> <target depends="init,compile,-debug-init,-main-module-check,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/> <target depends="init,-debug-init,-main-module-check" if="netbeans.home" name="-debug-start-debugger-stepinto"> <j2semodularproject1:nbjpdastart xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" stopclassname="${debug.class}"/> </target> <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/> <target depends="init,compile-single,-debug-init,-main-module-check" if="netbeans.home" name="-debug-start-debuggee-single"> <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> <j2semodularproject1:debug xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classname="${debug.class}"/> </target> <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/> <target depends="init,compile-test-single,-debug-init,-main-module-check" if="netbeans.home" name="-debug-start-debuggee-main-test"> <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> <j2semodularproject1:debug xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classname="${debug.class}" classpath="${debug.test.classpath}"/> </target> <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/> <target depends="init" name="-pre-debug-fix"> <fail unless="fix.includes">Must set fix.includes</fail> <property name="javac.includes" value="${fix.includes}.java"/> </target> <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix"> <property location="${build.modules.dir}" name="debug.modules.dir"/> <j2semodularproject1:nbjpdareload xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1"/> </target> <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/> <!-- ================= PROFILING SECTION ================= --> <!-- pre NB7.2 profiler integration --> <target depends="profile-init,compile" description="Profile a project in the IDE." if="profiler.info.jvmargs.agent" name="-profile-pre72"> <fail unless="netbeans.home">This target only works when run from inside the NetBeans IDE.</fail> <nbprofiledirect> <classpath> <path path="${run.classpath}"/> </classpath> </nbprofiledirect> <profile/> </target> <target depends="profile-init,compile-single" description="Profile a selected class in the IDE." if="profiler.info.jvmargs.agent" name="-profile-single-pre72"> <fail unless="profile.class">Must select one file in the IDE or set profile.class</fail> <fail unless="netbeans.home">This target only works when run from inside the NetBeans IDE.</fail> <nbprofiledirect> <classpath> <path path="${run.classpath}"/> </classpath> </nbprofiledirect> <profile classname="${profile.class}"/> </target> <target depends="profile-init,compile-single" if="profiler.info.jvmargs.agent" name="-profile-applet-pre72"> <fail unless="netbeans.home">This target only works when run from inside the NetBeans IDE.</fail> <nbprofiledirect> <classpath> <path path="${run.classpath}"/> </classpath> </nbprofiledirect> <profile classname="sun.applet.AppletViewer"> <customize> <arg value="${applet.url}"/> </customize> </profile> </target> <target depends="-init-macrodef-junit,profile-init,compile-test-single" if="profiler.info.jvmargs.agent" name="-profile-test-single-pre72"> <fail unless="netbeans.home">This target only works when run from inside the NetBeans IDE.</fail> <nbprofiledirect> <classpath> <path path="${run.test.classpath}"/> </classpath> </nbprofiledirect> <j2semodularproject1:junit xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="${excludes}" includes="${includes}" testincludes="${profile.class}" testmethods=""> <customize> <jvmarg value="-agentlib:jdwp=transport=${debug-transport},address=${jpda.address}"/> <env key="${profiler.info.pathvar}" path="${profiler.info.agentpath}:${profiler.current.path}"/> <jvmarg value="${profiler.info.jvmargs.agent}"/> <jvmarg line="${profiler.info.jvmargs}"/> <classpath> <path path="${run.test.classpath}"/> </classpath> </customize> </j2semodularproject1:junit> </target> <!-- end of pre NB72 profiling section --> <target if="netbeans.home" name="-profile-check"> <condition property="profiler.configured"> <or> <contains casesensitive="true" string="${run.jvmargs.ide}" substring="-agentpath:"/> <contains casesensitive="true" string="${run.jvmargs.ide}" substring="-javaagent:"/> </or> </condition> </target> <target depends="-profile-check,-profile-pre72" description="Profile a project in the IDE." if="profiler.configured" name="profile" unless="profiler.info.jvmargs.agent"> <startprofiler/> <antcall target="run"/> </target> <target depends="-profile-check,-profile-single-pre72" description="Profile a selected class in the IDE." if="profiler.configured" name="profile-single" unless="profiler.info.jvmargs.agent"> <fail unless="run.class">Must select one file in the IDE or set run.class</fail> <startprofiler/> <antcall target="run-single"/> </target> <target depends="-profile-test-single-pre72" description="Profile a selected test in the IDE." name="profile-test-single"/> <target depends="-profile-check" description="Profile a selected test in the IDE." if="profiler.configured" name="profile-test" unless="profiler.info.jvmargs"> <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail> <startprofiler/> <antcall target="test-single"/> </target> <target depends="-profile-check" description="Profile a selected class in the IDE." if="profiler.configured" name="profile-test-with-main"> <fail unless="run.class">Must select one file in the IDE or set run.class</fail> <startprofiler/> <antcall target="run-test-with-main"/> </target> <target depends="-profile-check,-profile-applet-pre72" if="profiler.configured" name="profile-applet" unless="profiler.info.jvmargs.agent"> <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> <startprofiler/> <antcall target="run-applet"/> </target> <!-- =============== JAVADOC SECTION =============== --> <target depends="init" if="have.sources" name="-javadoc-build"> <mkdir dir="${dist.javadoc.dir}"/> <condition else="" property="javadoc.endorsed.classpath.cmd.line.arg" value="-J${endorsed.classpath.cmd.line.arg}"> <and> <isset property="endorsed.classpath.cmd.line.arg"/> <not> <equals arg1="${endorsed.classpath.cmd.line.arg}" arg2=""/> </not> </and> </condition> <condition else="" property="bug5101868workaround" value="*.java"> <matches pattern="1\.[56](\..*)?" string="${java.version}"/> </condition> <condition else="" property="javadoc.html5.cmd.line.arg" value="-html5"> <and> <isset property="javadoc.html5"/> <available file="${jdk.home}${file.separator}lib${file.separator}jrt-fs.jar"/> </and> </condition> <javadoc additionalparam="-J-Dfile.encoding=${file.encoding} ${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}"> <classpath> <path path="${javac.classpath}"/> </classpath> <fileset dir="${src.dir}" excludes="${bug5101868workaround},${excludes}" includes="${includes}"> <filename name="**/*.java"/> </fileset> <fileset dir="${optional.main.dir}" excludes="${bug5101868workaround},${excludes}" includes="${includes}"> <filename name="**/*.java"/> </fileset> <fileset dir="${incubator.main.dir}" excludes="${bug5101868workaround},${excludes}" includes="${includes}"> <filename name="**/*.java"/> </fileset> <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false"> <include name="**/*.java"/> <exclude name="*.java"/> </fileset> <arg line="${javadoc.endorsed.classpath.cmd.line.arg}"/> <arg line="${javadoc.html5.cmd.line.arg}"/> </javadoc> <copy todir="${dist.javadoc.dir}"> <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}"> <filename name="**/doc-files/**"/> </fileset> <fileset dir="${optional.main.dir}" excludes="${excludes}" includes="${includes}"> <filename name="**/doc-files/**"/> </fileset> <fileset dir="${incubator.main.dir}" excludes="${excludes}" includes="${includes}"> <filename name="**/doc-files/**"/> </fileset> <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false"> <include name="**/doc-files/**"/> </fileset> </copy> </target> <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview"> <nbbrowse file="${dist.javadoc.dir}/index.html"/> </target> <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/> <!-- ========================= TEST COMPILATION SECTION ========================= --> <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test"> <mkdir dir="${build.test.modules.dir}"/> </target> <target name="-pre-compile-test"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="-init-source-module-properties" name="-init-test-run-module-properties"> <fileset dir="${build.test.modules.dir}" id="run.test.packages.internal" includes="**/*.class"/> <property location="${build.test.modules.dir}" name="build.test.modules.dir.abs.internal"/> <pathconvert pathsep=" " property="run.test.addexports.internal" refid="run.test.packages.internal"> <chainedmapper> <filtermapper> <replacestring from="${build.test.modules.dir.abs.internal}${file.separator}" to=""/> </filtermapper> <regexpmapper from="^([^${file.separator.string}]*)\Q${file.separator}\E(.*)\Q${file.separator}\E.*\.class$$" to="\1${path.separator}\2"/> <filtermapper> <uniqfilter/> <replacestring from="${file.separator}" to="."/> </filtermapper> <regexpmapper from="([^${file.separator.string}]+)${path.separator}(.*)" to="--add-exports \1/\2=ALL-UNNAMED"/> </chainedmapper> </pathconvert> <property location="${build.test.modules.dir}" name="build.test.modules.location"/> <pathconvert pathsep="," property="run.test.addmodules.list"> <map from="${build.test.modules.location}${file.separator}" to=""/> <dirset dir="${build.test.modules.dir}" includes="*"/> <chainedmapper> <filtermapper> <uniqfilter/> </filtermapper> </chainedmapper> </pathconvert> <pathconvert pathsep=" " property="run.test.patchmodules.list"> <dirset dir="${build.test.modules.dir}" includes="*"> <custom classname="netbeans.ModuleInfoSelector" classpath="${netbeans.modular.tasks.dir}/out"> <param name="extension" value="class"/> </custom> </dirset> <chainedmapper> <filtermapper> <uniqfilter/> </filtermapper> <regexpmapper from=".*\Q${file.separator}\E([^${file.separator.string}]+)$" to="--patch-module \1=\0"/> </chainedmapper> </pathconvert> <j2semodularproject1:coalesce_keyvalue xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" entrySep="--patch-module " multiSep="${path.separator}" property="run.test.patchmodules" value="${run.test.patchmodules.list}" valueSep="="/> <condition else="" property="run.test.addmodules.internal" value="--add-modules ${run.test.addmodules.list}"> <isset property="run.test.addmodules.list"/> </condition> <pathconvert pathsep=" " property="run.test.addreads.internal"> <map from="${build.test.modules.location}" to=""/> <dirset dir="${build.test.modules.dir}" includes="*"/> <chainedmapper> <regexpmapper from="^\Q${build.test.modules.location}${file.separator}\E(.*)" to="\1"/> <regexpmapper from="(.*)" to="--add-reads \1=ALL-UNNAMED"/> <filtermapper> <uniqfilter/> </filtermapper> </chainedmapper> </pathconvert> <property name="run.test.jvmargs" value="${run.test.addmodules.internal} ${run.test.addreads.internal} ${run.test.addexports.internal} ${run.test.patchmodules}"/> </target> <target depends="-init-source-module-properties" name="-init-test-javac-module-properties"> <pathconvert pathsep=" " property="compile.test.patchmodule.internal" refid="have.tests.patchset"> <regexpmapper from="(.*\Q${file.separator}\E)([^${file.separator.string}]+)\Q${file.separator}\E(.*)$$" to="--patch-module \2=\1\2${file.separator.string}\3"/> </pathconvert> <pathconvert pathsep=" " property="compile.test.addreads"> <union refid="have.tests.set"/> <chainedmapper> <firstmatchmapper> <regexpmapper from="${have.tests.test.src.dir.regexp}" to="\1"/> </firstmatchmapper> <regexpmapper from="(.*)" to="--add-reads \1=ALL-UNNAMED"/> <filtermapper> <uniqfilter/> </filtermapper> </chainedmapper> </pathconvert> <j2semodularproject1:coalesce_keyvalue xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" entrySep="--patch-module " multiSep="${path.separator}" property="compile.test.patchmodules" value="${compile.test.patchmodule.internal}" valueSep="="/> <property name="javac.test.moduleargs" value="${compile.test.patchmodules} ${compile.test.addreads}"/> </target> <target depends="-init-test-javac-module-properties" name="-init-test-module-properties"> <property location="${build.modules.dir}" name="test.module.build.location"/> <property name="test.source.modulepath" value="${test.src.dir}/*/${test.src.dir.path}:${optional.test.dir}/*/${optional.test.dir.path}:${incubator.test.dir}/*/${incubator.test.dir.path}"/> <property name="test.compile.modulepath" value="${javac.test.modulepath}:${build.modules.dir}"/> <macrodef name="test-javac" uri="http://www.netbeans.org/ns/j2se-modular-project/1"> <attribute default="${includes}" name="includes"/> <attribute default="${excludes}" name="excludes"/> <element implicit="true" name="additionalargs" optional="true"/> <sequential> <j2semodularproject1:javac xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" apgeneratedsrcdir="${build.test.modules.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.modules.dir}" excludes="@{excludes}" includes="@{includes}" modulepath="${test.compile.modulepath}" modulesourcepath="${test.source.modulepath}" processorpath="${javac.test.processorpath}"> <customize> <compilerarg line="${javac.test.moduleargs}"/> <additionalargs/> </customize> </j2semodularproject1:javac> </sequential> </macrodef> </target> <target if="do.depend.true" name="-compile-test-depend"> <j2semodularproject1:depend xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}:${optional.test.dir}:${incubator.test.dir}"/> </target> <target depends="init,deps-jar,compile,-init-test-module-properties,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test"> <j2semodularproject1:test-javac xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1"/> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${test.src.dir.path}" property="test.src.dir.path.regexp"/> <echo message="Copying resources from ${test.src.dir}"/> <copy todir="${build.test.modules.dir}"> <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${test.src.dir.path.regexp}" to="\1/\3"/> </copy> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${optional.test.dir.path}" property="optional.test.dir.path.regexp"/> <echo message="Copying resources from ${optional.test.dir}"/> <copy todir="${build.test.modules.dir}"> <fileset dir="${optional.test.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${optional.test.dir.path.regexp}" to="\1/\3"/> </copy> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${incubator.test.dir.path}" property="incubator.test.dir.path.regexp"/> <echo message="Copying resources from ${incubator.test.dir}"/> <copy todir="${build.test.modules.dir}"> <fileset dir="${incubator.test.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${incubator.test.dir.path.regexp}" to="\1/\3"/> </copy> </target> <target name="-post-compile-test"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/> <target name="-pre-compile-test-single"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init,deps-jar,compile,-init-test-module-properties,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single"> <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> <j2semodularproject1:force-recompile xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" destdir="${build.test.modules.dir}"/> <j2semodularproject1:test-javac xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" includes="${javac.includes}"/> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${test.src.dir.path}" property="test.src.dir.path.regexp"/> <echo message="Copying resources from ${test.src.dir}"/> <copy todir="${build.test.modules.dir}"> <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${test.src.dir.path.regexp}" to="\1/\3"/> </copy> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${optional.test.dir.path}" property="optional.test.dir.path.regexp"/> <echo message="Copying resources from ${optional.test.dir}"/> <copy todir="${build.test.modules.dir}"> <fileset dir="${optional.test.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${optional.test.dir.path.regexp}" to="\1/\3"/> </copy> <j2semodularproject1:modsource_regexp xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" filePattern="(.*$)" modsource="${incubator.test.dir.path}" property="incubator.test.dir.path.regexp"/> <echo message="Copying resources from ${incubator.test.dir}"/> <copy todir="${build.test.modules.dir}"> <fileset dir="${incubator.test.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> <regexpmapper from="${incubator.test.dir.path.regexp}" to="\1/\3"/> </copy> </target> <target name="-post-compile-test-single"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/> <!-- ======================= TEST EXECUTION SECTION ======================= --> <target depends="init" if="have.tests" name="-pre-test-run"> <mkdir dir="${build.test.results.dir}"/> </target> <target name="-init-test-run"> <property name="run.modules.dir" value="${build.test.modules.dir}"/> </target> <target depends="init,compile-test,-init-test-run-module-properties,-pre-test-run" if="have.tests" name="-do-test-run"> <j2semodularproject1:test xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" includes="${includes}" testincludes="**/*Test.java"/> </target> <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run"> <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> </target> <target depends="init" if="have.tests" name="test-report"/> <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/> <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/> <target depends="init" if="have.tests" name="-pre-test-run-single"> <mkdir dir="${build.test.results.dir}"/> </target> <target depends="init,compile-test-single,-init-test-run-module-properties,-pre-test-run-single" if="have.tests" name="-do-test-run-single"> <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail> <j2semodularproject1:test xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="" includes="${test.includes}" testincludes="${test.includes}"/> </target> <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single"> <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> </target> <target depends="init,compile-test-single,-init-test-run-module-properties,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/> <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single-method"> <fail unless="test.class">Must select some files in the IDE or set test.class</fail> <fail unless="test.method">Must select some method in the IDE or set test.method</fail> <j2semodularproject1:test xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="" includes="${javac.includes}" testincludes="${test.class}" testmethods="${test.method}"/> </target> <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single-method" if="have.tests" name="-post-test-run-single-method"> <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> </target> <target depends="init,compile-test-single,-init-test-run-module-properties,-pre-test-run-single,-do-test-run-single-method,-post-test-run-single-method" description="Run single unit test." name="test-single-method"/> <!-- ======================= TEST DEBUGGING SECTION ======================= --> <target depends="init,compile-test-single,-init-test-run-module-properties,-pre-test-run-single" if="have.tests" name="-debug-start-debuggee-test"> <fail unless="test.class">Must select one file in the IDE or set test.class</fail> <j2semodularproject1:test-debug xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="" includes="${javac.includes}" testClass="${test.class}" testincludes="${javac.includes}"/> </target> <target depends="init,compile-test-single,-init-test-run-module-properties,-pre-test-run-single" if="have.tests" name="-debug-start-debuggee-test-method"> <fail unless="test.class">Must select one file in the IDE or set test.class</fail> <fail unless="test.method">Must select some method in the IDE or set test.method</fail> <j2semodularproject1:test-debug xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" excludes="" includes="${javac.includes}" testClass="${test.class}" testMethod="${test.method}" testincludes="${test.class}" testmethods="${test.method}"/> </target> <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test"> <j2semodularproject1:nbjpdastart xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1" classpath="${debug.test.classpath}" name="${test.class}"/> </target> <target depends="init,compile-test-single,-init-test-run-module-properties,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/> <target depends="init,compile-test-single,-init-test-run-module-properties,-debug-start-debugger-test,-debug-start-debuggee-test-method" name="debug-test-method"/> <target depends="debug-test-method" name="debug-single-method"/> <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test"> <property name="debug.modules.dir" value="${build.test.modules.dir}"/> <j2semodularproject1:nbjpdareload xmlns:j2semodularproject1="http://www.netbeans.org/ns/j2se-modular-project/1"/> </target> <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/> <!-- ========================= APPLET EXECUTION SECTION ========================= --> <target name="run-applet"> <fail message="Applets are no longer supported by JDK 9"/> </target> <!-- ========================= APPLET DEBUGGING SECTION ========================= --> <target name="-debug-start-debuggee-applet"> <fail message="Applets are no longer supported by JDK 9"/> </target> <target name="debug-applet"> <fail message="Applets are no longer supported by JDK 9"/> </target> <!-- =============== CLEANUP SECTION =============== --> <target name="-deps-clean-init" unless="built-clean.properties"> <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/> <delete file="${built-clean.properties}" quiet="true"/> </target> <target if="already.built.clean.${basedir}" name="-warn-already-built-clean"> <echo level="warn" message="Cycle detected: Apache SIS on GeoAPI 3.0 was already built"/> </target> <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps"> <mkdir dir="${build.dir}"/> <touch file="${built-clean.properties}" verbose="false"/> <property file="${built-clean.properties}" prefix="already.built.clean."/> <antcall target="-warn-already-built-clean"/> <propertyfile file="${built-clean.properties}"> <entry key="${basedir}" value=""/> </propertyfile> </target> <target depends="init" name="-do-clean"> <delete dir="${build.dir}"/> <delete dir="${dist.jlink.output}"/> <delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/> </target> <target name="-post-clean"> <!-- Empty placeholder for easier customization. --> <!-- You can override this target in the ../build.xml file. --> </target> <target name="-recompile-netbeans-tasks-after-clean"> <antcall inheritall="false" target="-init-compile-netbeans-tasks"/> </target> <target depends="init,deps-clean,-do-clean,-recompile-netbeans-tasks-after-clean,-post-clean" description="Clean build products." name="clean"/> <target name="-check-call-dep"> <property file="${call.built.properties}" prefix="already.built."/> <condition property="should.call.dep"> <and> <not> <isset property="already.built.${call.subproject}"/> </not> <available file="${call.script}"/> </and> </condition> </target> <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep"> <ant antfile="${call.script}" inheritall="false" target="${call.target}"> <propertyset> <propertyref prefix="transfer."/> <mapper from="transfer.*" to="*" type="glob"/> </propertyset> </ant> </target> </project>