manifests/charts/base/crds/crd-all.gen.yaml [4775:5502]:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    schema:
      openAPIV3Schema:
        properties:
          spec:
            description: 'Configuration affecting label/content routing, sni routing,
              etc. See more details at: https://istio.io/docs/reference/config/networking/virtual-service.html'
            properties:
              exportTo:
                description: A list of namespaces to which this virtual service is
                  exported.
                items:
                  type: string
                type: array
              gateways:
                description: The names of gateways and sidecars that should apply
                  these routes.
                items:
                  type: string
                type: array
              hosts:
                description: The destination hosts to which traffic is being sent.
                items:
                  type: string
                type: array
              http:
                description: An ordered list of route rules for HTTP traffic.
                items:
                  properties:
                    corsPolicy:
                      description: Cross-Origin Resource Sharing policy (CORS).
                      properties:
                        allowCredentials:
                          nullable: true
                          type: boolean
                        allowHeaders:
                          items:
                            type: string
                          type: array
                        allowMethods:
                          description: List of HTTP methods allowed to access the
                            resource.
                          items:
                            type: string
                          type: array
                        allowOrigin:
                          description: The list of origins that are allowed to perform
                            CORS requests.
                          items:
                            type: string
                          type: array
                        allowOrigins:
                          description: String patterns that match allowed origins.
                          items:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          type: array
                        exposeHeaders:
                          items:
                            type: string
                          type: array
                        maxAge:
                          type: string
                      type: object
                    delegate:
                      properties:
                        name:
                          description: Name specifies the name of the delegate VirtualService.
                          type: string
                        namespace:
                          description: Namespace specifies the namespace where the
                            delegate VirtualService resides.
                          type: string
                      type: object
                    fault:
                      description: Fault injection policy to apply on HTTP traffic
                        at the client side.
                      properties:
                        abort:
                          oneOf:
                          - not:
                              anyOf:
                              - required:
                                - httpStatus
                              - required:
                                - grpcStatus
                              - required:
                                - http2Error
                          - required:
                            - httpStatus
                          - required:
                            - grpcStatus
                          - required:
                            - http2Error
                          properties:
                            grpcStatus:
                              type: string
                            http2Error:
                              type: string
                            httpStatus:
                              description: HTTP status code to use to abort the Http
                                request.
                              format: int32
                              type: integer
                            percentage:
                              description: Percentage of requests to be aborted with
                                the error code provided.
                              properties:
                                value:
                                  format: double
                                  type: number
                              type: object
                          type: object
                        delay:
                          oneOf:
                          - not:
                              anyOf:
                              - required:
                                - fixedDelay
                              - required:
                                - exponentialDelay
                          - required:
                            - fixedDelay
                          - required:
                            - exponentialDelay
                          properties:
                            exponentialDelay:
                              type: string
                            fixedDelay:
                              description: Add a fixed delay before forwarding the
                                request.
                              type: string
                            percent:
                              description: Percentage of requests on which the delay
                                will be injected (0-100).
                              format: int32
                              type: integer
                            percentage:
                              description: Percentage of requests on which the delay
                                will be injected.
                              properties:
                                value:
                                  format: double
                                  type: number
                              type: object
                          type: object
                      type: object
                    headers:
                      properties:
                        request:
                          properties:
                            add:
                              additionalProperties:
                                type: string
                              type: object
                            remove:
                              items:
                                type: string
                              type: array
                            set:
                              additionalProperties:
                                type: string
                              type: object
                          type: object
                        response:
                          properties:
                            add:
                              additionalProperties:
                                type: string
                              type: object
                            remove:
                              items:
                                type: string
                              type: array
                            set:
                              additionalProperties:
                                type: string
                              type: object
                          type: object
                      type: object
                    match:
                      items:
                        properties:
                          authority:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          gateways:
                            description: Names of gateways where the rule should be
                              applied.
                            items:
                              type: string
                            type: array
                          headers:
                            additionalProperties:
                              oneOf:
                              - not:
                                  anyOf:
                                  - required:
                                    - exact
                                  - required:
                                    - prefix
                                  - required:
                                    - regex
                              - required:
                                - exact
                              - required:
                                - prefix
                              - required:
                                - regex
                              properties:
                                exact:
                                  type: string
                                prefix:
                                  type: string
                                regex:
                                  description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                  type: string
                              type: object
                            type: object
                          ignoreUriCase:
                            description: Flag to specify whether the URI matching
                              should be case-insensitive.
                            type: boolean
                          method:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          name:
                            description: The name assigned to a match.
                            type: string
                          port:
                            description: Specifies the ports on the host that is being
                              addressed.
                            type: integer
                          queryParams:
                            additionalProperties:
                              oneOf:
                              - not:
                                  anyOf:
                                  - required:
                                    - exact
                                  - required:
                                    - prefix
                                  - required:
                                    - regex
                              - required:
                                - exact
                              - required:
                                - prefix
                              - required:
                                - regex
                              properties:
                                exact:
                                  type: string
                                prefix:
                                  type: string
                                regex:
                                  description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                  type: string
                              type: object
                            description: Query parameters for matching.
                            type: object
                          scheme:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          sourceLabels:
                            additionalProperties:
                              type: string
                            type: object
                          sourceNamespace:
                            description: Source namespace constraining the applicability
                              of a rule to workloads in that namespace.
                            type: string
                          uri:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          withoutHeaders:
                            additionalProperties:
                              oneOf:
                              - not:
                                  anyOf:
                                  - required:
                                    - exact
                                  - required:
                                    - prefix
                                  - required:
                                    - regex
                              - required:
                                - exact
                              - required:
                                - prefix
                              - required:
                                - regex
                              properties:
                                exact:
                                  type: string
                                prefix:
                                  type: string
                                regex:
                                  description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                  type: string
                              type: object
                            description: withoutHeader has the same syntax with the
                              header, but has opposite meaning.
                            type: object
                        type: object
                      type: array
                    mirror:
                      properties:
                        host:
                          description: The name of a service from the service registry.
                          type: string
                        port:
                          description: Specifies the port on the host that is being
                            addressed.
                          properties:
                            number:
                              type: integer
                          type: object
                        subset:
                          description: The name of a subset within the service.
                          type: string
                      type: object
                    mirror_percent:
                      description: Percentage of the traffic to be mirrored by the
                        `mirror` field.
                      nullable: true
                      type: integer
                    mirrorPercent:
                      description: Percentage of the traffic to be mirrored by the
                        `mirror` field.
                      nullable: true
                      type: integer
                    mirrorPercentage:
                      description: Percentage of the traffic to be mirrored by the
                        `mirror` field.
                      properties:
                        value:
                          format: double
                          type: number
                      type: object
                    name:
                      description: The name assigned to the route for debugging purposes.
                      type: string
                    redirect:
                      description: A HTTP rule can either redirect or forward (default)
                        traffic.
                      oneOf:
                      - not:
                          anyOf:
                          - required:
                            - port
                          - required:
                            - derivePort
                      - required:
                        - port
                      - required:
                        - derivePort
                      properties:
                        authority:
                          type: string
                        derivePort:
                          enum:
                          - FROM_PROTOCOL_DEFAULT
                          - FROM_REQUEST_PORT
                          type: string
                        port:
                          description: On a redirect, overwrite the port portion of
                            the URL with this value.
                          type: integer
                        redirectCode:
                          type: integer
                        scheme:
                          description: On a redirect, overwrite the scheme portion
                            of the URL with this value.
                          type: string
                        uri:
                          type: string
                      type: object
                    retries:
                      description: Retry policy for HTTP requests.
                      properties:
                        attempts:
                          description: Number of retries to be allowed for a given
                            request.
                          format: int32
                          type: integer
                        perTryTimeout:
                          description: Timeout per attempt for a given request, including
                            the initial call and any retries.
                          type: string
                        retryOn:
                          description: Specifies the conditions under which retry
                            takes place.
                          type: string
                        retryRemoteLocalities:
                          description: Flag to specify whether the retries should
                            retry to other localities.
                          nullable: true
                          type: boolean
                      type: object
                    rewrite:
                      description: Rewrite HTTP URIs and Authority headers.
                      properties:
                        authority:
                          description: rewrite the Authority/Host header with this
                            value.
                          type: string
                        uri:
                          type: string
                      type: object
                    route:
                      description: A HTTP rule can either redirect or forward (default)
                        traffic.
                      items:
                        properties:
                          destination:
                            properties:
                              host:
                                description: The name of a service from the service
                                  registry.
                                type: string
                              port:
                                description: Specifies the port on the host that is
                                  being addressed.
                                properties:
                                  number:
                                    type: integer
                                type: object
                              subset:
                                description: The name of a subset within the service.
                                type: string
                            type: object
                          headers:
                            properties:
                              request:
                                properties:
                                  add:
                                    additionalProperties:
                                      type: string
                                    type: object
                                  remove:
                                    items:
                                      type: string
                                    type: array
                                  set:
                                    additionalProperties:
                                      type: string
                                    type: object
                                type: object
                              response:
                                properties:
                                  add:
                                    additionalProperties:
                                      type: string
                                    type: object
                                  remove:
                                    items:
                                      type: string
                                    type: array
                                  set:
                                    additionalProperties:
                                      type: string
                                    type: object
                                type: object
                            type: object
                          weight:
                            description: Weight specifies the relative proportion
                              of traffic to be forwarded to the destination.
                            format: int32
                            type: integer
                        type: object
                      type: array
                    timeout:
                      description: Timeout for HTTP requests, default is disabled.
                      type: string
                  type: object
                type: array
              tcp:
                description: An ordered list of route rules for opaque TCP traffic.
                items:
                  properties:
                    match:
                      items:
                        properties:
                          destinationSubnets:
                            description: IPv4 or IPv6 ip addresses of destination
                              with optional subnet.
                            items:
                              type: string
                            type: array
                          gateways:
                            description: Names of gateways where the rule should be
                              applied.
                            items:
                              type: string
                            type: array
                          port:
                            description: Specifies the port on the host that is being
                              addressed.
                            type: integer
                          sourceLabels:
                            additionalProperties:
                              type: string
                            type: object
                          sourceNamespace:
                            description: Source namespace constraining the applicability
                              of a rule to workloads in that namespace.
                            type: string
                          sourceSubnet:
                            description: IPv4 or IPv6 ip address of source with optional
                              subnet.
                            type: string
                        type: object
                      type: array
                    route:
                      description: The destination to which the connection should
                        be forwarded to.
                      items:
                        properties:
                          destination:
                            properties:
                              host:
                                description: The name of a service from the service
                                  registry.
                                type: string
                              port:
                                description: Specifies the port on the host that is
                                  being addressed.
                                properties:
                                  number:
                                    type: integer
                                type: object
                              subset:
                                description: The name of a subset within the service.
                                type: string
                            type: object
                          weight:
                            description: Weight specifies the relative proportion
                              of traffic to be forwarded to the destination.
                            format: int32
                            type: integer
                        type: object
                      type: array
                  type: object
                type: array
              tls:
                items:
                  properties:
                    match:
                      items:
                        properties:
                          destinationSubnets:
                            description: IPv4 or IPv6 ip addresses of destination
                              with optional subnet.
                            items:
                              type: string
                            type: array
                          gateways:
                            description: Names of gateways where the rule should be
                              applied.
                            items:
                              type: string
                            type: array
                          port:
                            description: Specifies the port on the host that is being
                              addressed.
                            type: integer
                          sniHosts:
                            description: SNI (server name indicator) to match on.
                            items:
                              type: string
                            type: array
                          sourceLabels:
                            additionalProperties:
                              type: string
                            type: object
                          sourceNamespace:
                            description: Source namespace constraining the applicability
                              of a rule to workloads in that namespace.
                            type: string
                        type: object
                      type: array
                    route:
                      description: The destination to which the connection should
                        be forwarded to.
                      items:
                        properties:
                          destination:
                            properties:
                              host:
                                description: The name of a service from the service
                                  registry.
                                type: string
                              port:
                                description: Specifies the port on the host that is
                                  being addressed.
                                properties:
                                  number:
                                    type: integer
                                type: object
                              subset:
                                description: The name of a subset within the service.
                                type: string
                            type: object
                          weight:
                            description: Weight specifies the relative proportion
                              of traffic to be forwarded to the destination.
                            format: int32
                            type: integer
                        type: object
                      type: array
                  type: object
                type: array
            type: object
          status:
            type: object
            x-kubernetes-preserve-unknown-fields: true
        type: object
    served: true
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



manifests/charts/istiod-remote/templates/crd-all.gen.yaml [4027:4754]:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    schema:
      openAPIV3Schema:
        properties:
          spec:
            description: 'Configuration affecting label/content routing, sni routing,
              etc. See more details at: https://istio.io/docs/reference/config/networking/virtual-service.html'
            properties:
              exportTo:
                description: A list of namespaces to which this virtual service is
                  exported.
                items:
                  type: string
                type: array
              gateways:
                description: The names of gateways and sidecars that should apply
                  these routes.
                items:
                  type: string
                type: array
              hosts:
                description: The destination hosts to which traffic is being sent.
                items:
                  type: string
                type: array
              http:
                description: An ordered list of route rules for HTTP traffic.
                items:
                  properties:
                    corsPolicy:
                      description: Cross-Origin Resource Sharing policy (CORS).
                      properties:
                        allowCredentials:
                          nullable: true
                          type: boolean
                        allowHeaders:
                          items:
                            type: string
                          type: array
                        allowMethods:
                          description: List of HTTP methods allowed to access the
                            resource.
                          items:
                            type: string
                          type: array
                        allowOrigin:
                          description: The list of origins that are allowed to perform
                            CORS requests.
                          items:
                            type: string
                          type: array
                        allowOrigins:
                          description: String patterns that match allowed origins.
                          items:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          type: array
                        exposeHeaders:
                          items:
                            type: string
                          type: array
                        maxAge:
                          type: string
                      type: object
                    delegate:
                      properties:
                        name:
                          description: Name specifies the name of the delegate VirtualService.
                          type: string
                        namespace:
                          description: Namespace specifies the namespace where the
                            delegate VirtualService resides.
                          type: string
                      type: object
                    fault:
                      description: Fault injection policy to apply on HTTP traffic
                        at the client side.
                      properties:
                        abort:
                          oneOf:
                          - not:
                              anyOf:
                              - required:
                                - httpStatus
                              - required:
                                - grpcStatus
                              - required:
                                - http2Error
                          - required:
                            - httpStatus
                          - required:
                            - grpcStatus
                          - required:
                            - http2Error
                          properties:
                            grpcStatus:
                              type: string
                            http2Error:
                              type: string
                            httpStatus:
                              description: HTTP status code to use to abort the Http
                                request.
                              format: int32
                              type: integer
                            percentage:
                              description: Percentage of requests to be aborted with
                                the error code provided.
                              properties:
                                value:
                                  format: double
                                  type: number
                              type: object
                          type: object
                        delay:
                          oneOf:
                          - not:
                              anyOf:
                              - required:
                                - fixedDelay
                              - required:
                                - exponentialDelay
                          - required:
                            - fixedDelay
                          - required:
                            - exponentialDelay
                          properties:
                            exponentialDelay:
                              type: string
                            fixedDelay:
                              description: Add a fixed delay before forwarding the
                                request.
                              type: string
                            percent:
                              description: Percentage of requests on which the delay
                                will be injected (0-100).
                              format: int32
                              type: integer
                            percentage:
                              description: Percentage of requests on which the delay
                                will be injected.
                              properties:
                                value:
                                  format: double
                                  type: number
                              type: object
                          type: object
                      type: object
                    headers:
                      properties:
                        request:
                          properties:
                            add:
                              additionalProperties:
                                type: string
                              type: object
                            remove:
                              items:
                                type: string
                              type: array
                            set:
                              additionalProperties:
                                type: string
                              type: object
                          type: object
                        response:
                          properties:
                            add:
                              additionalProperties:
                                type: string
                              type: object
                            remove:
                              items:
                                type: string
                              type: array
                            set:
                              additionalProperties:
                                type: string
                              type: object
                          type: object
                      type: object
                    match:
                      items:
                        properties:
                          authority:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          gateways:
                            description: Names of gateways where the rule should be
                              applied.
                            items:
                              type: string
                            type: array
                          headers:
                            additionalProperties:
                              oneOf:
                              - not:
                                  anyOf:
                                  - required:
                                    - exact
                                  - required:
                                    - prefix
                                  - required:
                                    - regex
                              - required:
                                - exact
                              - required:
                                - prefix
                              - required:
                                - regex
                              properties:
                                exact:
                                  type: string
                                prefix:
                                  type: string
                                regex:
                                  description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                  type: string
                              type: object
                            type: object
                          ignoreUriCase:
                            description: Flag to specify whether the URI matching
                              should be case-insensitive.
                            type: boolean
                          method:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          name:
                            description: The name assigned to a match.
                            type: string
                          port:
                            description: Specifies the ports on the host that is being
                              addressed.
                            type: integer
                          queryParams:
                            additionalProperties:
                              oneOf:
                              - not:
                                  anyOf:
                                  - required:
                                    - exact
                                  - required:
                                    - prefix
                                  - required:
                                    - regex
                              - required:
                                - exact
                              - required:
                                - prefix
                              - required:
                                - regex
                              properties:
                                exact:
                                  type: string
                                prefix:
                                  type: string
                                regex:
                                  description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                  type: string
                              type: object
                            description: Query parameters for matching.
                            type: object
                          scheme:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          sourceLabels:
                            additionalProperties:
                              type: string
                            type: object
                          sourceNamespace:
                            description: Source namespace constraining the applicability
                              of a rule to workloads in that namespace.
                            type: string
                          uri:
                            oneOf:
                            - not:
                                anyOf:
                                - required:
                                  - exact
                                - required:
                                  - prefix
                                - required:
                                  - regex
                            - required:
                              - exact
                            - required:
                              - prefix
                            - required:
                              - regex
                            properties:
                              exact:
                                type: string
                              prefix:
                                type: string
                              regex:
                                description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                type: string
                            type: object
                          withoutHeaders:
                            additionalProperties:
                              oneOf:
                              - not:
                                  anyOf:
                                  - required:
                                    - exact
                                  - required:
                                    - prefix
                                  - required:
                                    - regex
                              - required:
                                - exact
                              - required:
                                - prefix
                              - required:
                                - regex
                              properties:
                                exact:
                                  type: string
                                prefix:
                                  type: string
                                regex:
                                  description: RE2 style regex-based match (https://github.com/google/re2/wiki/Syntax).
                                  type: string
                              type: object
                            description: withoutHeader has the same syntax with the
                              header, but has opposite meaning.
                            type: object
                        type: object
                      type: array
                    mirror:
                      properties:
                        host:
                          description: The name of a service from the service registry.
                          type: string
                        port:
                          description: Specifies the port on the host that is being
                            addressed.
                          properties:
                            number:
                              type: integer
                          type: object
                        subset:
                          description: The name of a subset within the service.
                          type: string
                      type: object
                    mirror_percent:
                      description: Percentage of the traffic to be mirrored by the
                        `mirror` field.
                      nullable: true
                      type: integer
                    mirrorPercent:
                      description: Percentage of the traffic to be mirrored by the
                        `mirror` field.
                      nullable: true
                      type: integer
                    mirrorPercentage:
                      description: Percentage of the traffic to be mirrored by the
                        `mirror` field.
                      properties:
                        value:
                          format: double
                          type: number
                      type: object
                    name:
                      description: The name assigned to the route for debugging purposes.
                      type: string
                    redirect:
                      description: A HTTP rule can either redirect or forward (default)
                        traffic.
                      oneOf:
                      - not:
                          anyOf:
                          - required:
                            - port
                          - required:
                            - derivePort
                      - required:
                        - port
                      - required:
                        - derivePort
                      properties:
                        authority:
                          type: string
                        derivePort:
                          enum:
                          - FROM_PROTOCOL_DEFAULT
                          - FROM_REQUEST_PORT
                          type: string
                        port:
                          description: On a redirect, overwrite the port portion of
                            the URL with this value.
                          type: integer
                        redirectCode:
                          type: integer
                        scheme:
                          description: On a redirect, overwrite the scheme portion
                            of the URL with this value.
                          type: string
                        uri:
                          type: string
                      type: object
                    retries:
                      description: Retry policy for HTTP requests.
                      properties:
                        attempts:
                          description: Number of retries to be allowed for a given
                            request.
                          format: int32
                          type: integer
                        perTryTimeout:
                          description: Timeout per attempt for a given request, including
                            the initial call and any retries.
                          type: string
                        retryOn:
                          description: Specifies the conditions under which retry
                            takes place.
                          type: string
                        retryRemoteLocalities:
                          description: Flag to specify whether the retries should
                            retry to other localities.
                          nullable: true
                          type: boolean
                      type: object
                    rewrite:
                      description: Rewrite HTTP URIs and Authority headers.
                      properties:
                        authority:
                          description: rewrite the Authority/Host header with this
                            value.
                          type: string
                        uri:
                          type: string
                      type: object
                    route:
                      description: A HTTP rule can either redirect or forward (default)
                        traffic.
                      items:
                        properties:
                          destination:
                            properties:
                              host:
                                description: The name of a service from the service
                                  registry.
                                type: string
                              port:
                                description: Specifies the port on the host that is
                                  being addressed.
                                properties:
                                  number:
                                    type: integer
                                type: object
                              subset:
                                description: The name of a subset within the service.
                                type: string
                            type: object
                          headers:
                            properties:
                              request:
                                properties:
                                  add:
                                    additionalProperties:
                                      type: string
                                    type: object
                                  remove:
                                    items:
                                      type: string
                                    type: array
                                  set:
                                    additionalProperties:
                                      type: string
                                    type: object
                                type: object
                              response:
                                properties:
                                  add:
                                    additionalProperties:
                                      type: string
                                    type: object
                                  remove:
                                    items:
                                      type: string
                                    type: array
                                  set:
                                    additionalProperties:
                                      type: string
                                    type: object
                                type: object
                            type: object
                          weight:
                            description: Weight specifies the relative proportion
                              of traffic to be forwarded to the destination.
                            format: int32
                            type: integer
                        type: object
                      type: array
                    timeout:
                      description: Timeout for HTTP requests, default is disabled.
                      type: string
                  type: object
                type: array
              tcp:
                description: An ordered list of route rules for opaque TCP traffic.
                items:
                  properties:
                    match:
                      items:
                        properties:
                          destinationSubnets:
                            description: IPv4 or IPv6 ip addresses of destination
                              with optional subnet.
                            items:
                              type: string
                            type: array
                          gateways:
                            description: Names of gateways where the rule should be
                              applied.
                            items:
                              type: string
                            type: array
                          port:
                            description: Specifies the port on the host that is being
                              addressed.
                            type: integer
                          sourceLabels:
                            additionalProperties:
                              type: string
                            type: object
                          sourceNamespace:
                            description: Source namespace constraining the applicability
                              of a rule to workloads in that namespace.
                            type: string
                          sourceSubnet:
                            description: IPv4 or IPv6 ip address of source with optional
                              subnet.
                            type: string
                        type: object
                      type: array
                    route:
                      description: The destination to which the connection should
                        be forwarded to.
                      items:
                        properties:
                          destination:
                            properties:
                              host:
                                description: The name of a service from the service
                                  registry.
                                type: string
                              port:
                                description: Specifies the port on the host that is
                                  being addressed.
                                properties:
                                  number:
                                    type: integer
                                type: object
                              subset:
                                description: The name of a subset within the service.
                                type: string
                            type: object
                          weight:
                            description: Weight specifies the relative proportion
                              of traffic to be forwarded to the destination.
                            format: int32
                            type: integer
                        type: object
                      type: array
                  type: object
                type: array
              tls:
                items:
                  properties:
                    match:
                      items:
                        properties:
                          destinationSubnets:
                            description: IPv4 or IPv6 ip addresses of destination
                              with optional subnet.
                            items:
                              type: string
                            type: array
                          gateways:
                            description: Names of gateways where the rule should be
                              applied.
                            items:
                              type: string
                            type: array
                          port:
                            description: Specifies the port on the host that is being
                              addressed.
                            type: integer
                          sniHosts:
                            description: SNI (server name indicator) to match on.
                            items:
                              type: string
                            type: array
                          sourceLabels:
                            additionalProperties:
                              type: string
                            type: object
                          sourceNamespace:
                            description: Source namespace constraining the applicability
                              of a rule to workloads in that namespace.
                            type: string
                        type: object
                      type: array
                    route:
                      description: The destination to which the connection should
                        be forwarded to.
                      items:
                        properties:
                          destination:
                            properties:
                              host:
                                description: The name of a service from the service
                                  registry.
                                type: string
                              port:
                                description: Specifies the port on the host that is
                                  being addressed.
                                properties:
                                  number:
                                    type: integer
                                type: object
                              subset:
                                description: The name of a subset within the service.
                                type: string
                            type: object
                          weight:
                            description: Weight specifies the relative proportion
                              of traffic to be forwarded to the destination.
                            format: int32
                            type: integer
                        type: object
                      type: array
                  type: object
                type: array
            type: object
          status:
            type: object
            x-kubernetes-preserve-unknown-fields: true
        type: object
    served: true
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



