sgx_tstd/src/sync/mutex.rs

// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements.  See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership.  The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License.  You may obtain a copy of the License at
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations
// under the License..

//!
//! The Intel(R) Software Guard Extensions SDK already supports mutex and conditional
//! variable synchronization mechanisms by means of the following API and data types
//! defined in the Types and Enumerations section. Some functions included in the
//! trusted Thread Synchronization library may make calls outside the enclave (OCALLs).
//! If you use any of the APIs below, you must first import the needed OCALL functions
//! from sgx_tstd.edl. Otherwise, you will get a linker error when the enclave is
//! being built; see Calling Functions outside the Enclave for additional details.
//! The table below illustrates the primitives that the Intel(R) SGX Thread
//! Synchronization library supports, as well as the OCALLs that each API function needs.
//!

use crate::cell::UnsafeCell;
use crate::fmt;
use crate::ops::{Deref, DerefMut};
use crate::sync::{poison, LockResult, TryLockError, TryLockResult};
use crate::sys_common::mutex as sys;

/// A mutual exclusion primitive useful for protecting shared data
///
/// This mutex will block threads waiting for the lock to become available. The
/// mutex can be created via a [`new`] constructor. Each mutex has a type parameter
/// which represents the data that it is protecting. The data can only be accessed
/// through the RAII guards returned from [`lock`] and [`try_lock`], which
/// guarantees that the data is only ever accessed when the mutex is locked.
///
/// # Poisoning
///
/// The mutexes in this module implement a strategy called "poisoning" where a
/// mutex is considered poisoned whenever a thread panics while holding the
/// mutex. Once a mutex is poisoned, all other threads are unable to access the
/// data by default as it is likely tainted (some invariant is not being
/// upheld).
///
/// For a mutex, this means that the [`lock`] and [`try_lock`] methods return a
/// [`Result`] which indicates whether a mutex has been poisoned or not. Most
/// usage of a mutex will simply [`unwrap()`] these results, propagating panics
/// among threads to ensure that a possibly invalid invariant is not witnessed.
///
/// A poisoned mutex, however, does not prevent all access to the underlying
/// data. The [`PoisonError`] type has an [`into_inner`] method which will return
/// the guard that would have otherwise been returned on a successful lock. This
/// allows access to the data, despite the lock being poisoned.
///
/// [`new`]: Self::new
/// [`lock`]: Self::lock
/// [`try_lock`]: Self::try_lock
/// [`unwrap()`]: Result::unwrap
/// [`PoisonError`]: super::PoisonError
/// [`into_inner`]: super::PoisonError::into_inner
///
/// # Examples
///
/// ```
/// use std::sync::{Arc, SgxMutex as Mutex};
/// use std::thread;
/// use std::sync::mpsc::channel;
///
/// const N: usize = 10;
///
/// // Spawn a few threads to increment a shared variable (non-atomically), and
/// // let the main thread know once all increments are done.
/// //
/// // Here we're using an Arc to share memory among threads, and the data inside
/// // the Arc is protected with a mutex.
/// let data = Arc::new(Mutex::new(0));
///
/// let (tx, rx) = channel();
/// for _ in 0..N {
///     let (data, tx) = (Arc::clone(&data), tx.clone());
///     thread::spawn(move || {
///         // The shared state can only be accessed once the lock is held.
///         // Our non-atomic increment is safe because we're the only thread
///         // which can access the shared state when the lock is held.
///         //
///         // We unwrap() the return value to assert that we are not expecting
///         // threads to ever fail while holding the lock.
///         let mut data = data.lock().unwrap();
///         *data += 1;
///         if *data == N {
///             tx.send(()).unwrap();
///         }
///         // the lock is unlocked here when `data` goes out of scope.
///     });
/// }
///
/// rx.recv().unwrap();
/// ```
///
/// To recover from a poisoned mutex:
///
/// ```
/// use std::sync::{Arc, SgxMutex as Mutex};
/// use std::thread;
///
/// let lock = Arc::new(Mutex::new(0_u32));
/// let lock2 = Arc::clone(&lock);
///
/// let _ = thread::spawn(move || -> () {
///     // This thread will acquire the mutex first, unwrapping the result of
///     // `lock` because the lock has not been poisoned.
///     let _guard = lock2.lock().unwrap();
///
///     // This panic while holding the lock (`_guard` is in scope) will poison
///     // the mutex.
///     panic!();
/// }).join();
///
/// // The lock is poisoned by this point, but the returned result can be
/// // pattern matched on to return the underlying guard on both branches.
/// let mut guard = match lock.lock() {
///     Ok(guard) => guard,
///     Err(poisoned) => poisoned.into_inner(),
/// };
///
/// *guard += 1;
/// ```
///
/// It is sometimes necessary to manually drop the mutex guard to unlock it
/// sooner than the end of the enclosing scope.
///
/// ```
/// use std::sync::{Arc, SgxMutex as Mutex};
/// use std::thread;
///
/// const N: usize = 3;
///
/// let data_mutex = Arc::new(Mutex::new(vec![1, 2, 3, 4]));
/// let res_mutex = Arc::new(Mutex::new(0));
///
/// let mut threads = Vec::with_capacity(N);
/// (0..N).for_each(|_| {
///     let data_mutex_clone = Arc::clone(&data_mutex);
///     let res_mutex_clone = Arc::clone(&res_mutex);
///
///     threads.push(thread::spawn(move || {
///         let mut data = data_mutex_clone.lock().unwrap();
///         // This is the result of some important and long-ish work.
///         let result = data.iter().fold(0, |acc, x| acc + x * 2);
///         data.push(result);
///         drop(data);
///         *res_mutex_clone.lock().unwrap() += result;
///     }));
/// });
///
/// let mut data = data_mutex.lock().unwrap();
/// // This is the result of some important and long-ish work.
/// let result = data.iter().fold(0, |acc, x| acc + x * 2);
/// data.push(result);
/// // We drop the `data` explicitly because it's not necessary anymore and the
/// // thread still has work to do. This allow other threads to start working on
/// // the data immediately, without waiting for the rest of the unrelated work
/// // to be done here.
/// //
/// // It's even more important here than in the threads because we `.join` the
/// // threads after that. If we had not dropped the mutex guard, a thread could
/// // be waiting forever for it, causing a deadlock.
/// drop(data);
/// // Here the mutex guard is not assigned to a variable and so, even if the
/// // scope does not end after this line, the mutex is still released: there is
/// // no deadlock.
/// *res_mutex.lock().unwrap() += result;
///
/// threads.into_iter().for_each(|thread| {
///     thread
///         .join()
///         .expect("The thread creating or execution failed !")
/// });
///
/// assert_eq!(*res_mutex.lock().unwrap(), 800);
/// ```
#[cfg_attr(not(test), rustc_diagnostic_item = "Mutex")]
pub struct SgxMutex<T: ?Sized> {
    inner: sys::MovableMutex,
    poison: poison::Flag,
    data: UnsafeCell<T>,
}

// these are the only places where `T: Send` matters; all other
// functionality works fine on a single thread.
unsafe impl<T: ?Sized + Send> Send for SgxMutex<T> {}
unsafe impl<T: ?Sized + Send> Sync for SgxMutex<T> {}

/// An RAII implementation of a "scoped lock" of a mutex. When this structure is
/// dropped (falls out of scope), the lock will be unlocked.
///
/// The data protected by the mutex can be accessed through this guard via its
/// [`Deref`] and [`DerefMut`] implementations.
///
/// This structure is created by the [`lock`] and [`try_lock`] methods on
/// [`Mutex`].
///
/// [`lock`]: Mutex::lock
/// [`try_lock`]: Mutex::try_lock
#[must_use = "if unused the Mutex will immediately unlock"]
#[must_not_suspend = "holding a MutexGuard across suspend \
                      points can cause deadlocks, delays, \
                      and cause Futures to not implement `Send`"]
#[clippy::has_significant_drop]
pub struct SgxMutexGuard<'a, T: ?Sized + 'a> {
    lock: &'a SgxMutex<T>,
    poison: poison::Guard,
}

impl<T: ?Sized> !Send for SgxMutexGuard<'_, T> {}
unsafe impl<T: ?Sized + Sync> Sync for SgxMutexGuard<'_, T> {}

impl<T> SgxMutex<T> {
    /// Creates a new mutex in an unlocked state ready for use.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::sync::SgxMutex;
    ///
    /// let mutex = SgxMutex::new(0);
    /// ```
    #[inline]
    pub const fn new(t: T) -> SgxMutex<T> {
        SgxMutex {
            inner: sys::MovableMutex::new(),
            poison: poison::Flag::new(),
            data: UnsafeCell::new(t),
        }
    }
}

impl<T: ?Sized> SgxMutex<T> {
    ///
    /// The function locks a trusted mutex object within an enclave.
    ///
    /// Acquires a mutex, blocking the current thread until it is able to do so.
    ///
    /// This function will block the local thread until it is available to acquire
    /// the mutex. Upon returning, the thread is the only thread with the lock
    /// held. An RAII guard is returned to allow scoped unlock of the lock. When
    /// the guard goes out of scope, the mutex will be unlocked.
    ///
    /// The exact behavior on locking a mutex in the thread which already holds
    /// the lock is left unspecified. However, this function will not return on
    /// the second call (it might panic or deadlock, for example).
    ///
    /// # Errors
    ///
    /// If another user of this mutex panicked while holding the mutex, then
    /// this call will return an error once the mutex is acquired.
    ///
    /// # Panics
    ///
    /// This function might panic when called if the lock is already held by
    /// the current thread.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::sync::{Arc, SgxMutex as Mutex};
    /// use std::thread;
    ///
    /// let mutex = Arc::new(Mutex::new(0));
    /// let c_mutex = Arc::clone(&mutex);
    ///
    /// thread::spawn(move || {
    ///     *c_mutex.lock().unwrap() = 10;
    /// }).join().expect("thread::spawn failed");
    /// assert_eq!(*mutex.lock().unwrap(), 10);
    /// ```
    pub fn lock(&self) -> LockResult<SgxMutexGuard<'_, T>> {
        unsafe {
            self.inner.raw_lock();
            SgxMutexGuard::new(self)
        }
    }

    ///
    /// The function tries to lock a trusted mutex object within an enclave.
    ///
    /// Attempts to acquire this lock.
    ///
    /// If the lock could not be acquired at this time, then [`Err`] is returned.
    /// Otherwise, an RAII guard is returned. The lock will be unlocked when the
    /// guard is dropped.
    ///
    /// This function does not block.
    ///
    /// # Errors
    ///
    /// If another user of this mutex panicked while holding the mutex, then
    /// this call will return the [`Poisoned`] error if the mutex would
    /// otherwise be acquired.
    ///
    /// If the mutex could not be acquired because it is already locked, then
    /// this call will return the [`WouldBlock`] error.
    ///
    /// [`Poisoned`]: TryLockError::Poisoned
    /// [`WouldBlock`]: TryLockError::WouldBlock
    ///
    /// # Examples
    ///
    /// ```
    /// use std::sync::{Arc, SgxMutex as Mutex};
    /// use std::thread;
    ///
    /// let mutex = Arc::new(Mutex::new(0));
    /// let c_mutex = Arc::clone(&mutex);
    ///
    /// thread::spawn(move || {
    ///     let mut lock = c_mutex.try_lock();
    ///     if let Ok(ref mut mutex) = lock {
    ///         **mutex = 10;
    ///     } else {
    ///         println!("try_lock failed");
    ///     }
    /// }).join().expect("thread::spawn failed");
    /// assert_eq!(*mutex.lock().unwrap(), 10);
    /// ```
    pub fn try_lock(&self) -> TryLockResult<SgxMutexGuard<'_, T>> {
        unsafe {
            if self.inner.try_lock() {
                Ok(SgxMutexGuard::new(self)?)
            } else {
                Err(TryLockError::WouldBlock)
            }
        }
    }

    /// Immediately drops the guard, and consequently unlocks the mutex.
    ///
    /// This function is equivalent to calling [`drop`] on the guard but is more self-documenting.
    /// Alternately, the guard will be automatically dropped when it goes out of scope.
    ///
    /// ```
    /// #![feature(mutex_unlock)]
    ///
    /// use std::sync::SgxMutex as Mutex;
    /// let mutex = Mutex::new(0);
    ///
    /// let mut guard = mutex.lock().unwrap();
    /// *guard += 20;
    /// Mutex::unlock(guard);
    /// ```
    pub fn unlock(guard: SgxMutexGuard<'_, T>) {
        drop(guard);
    }

    /// Determines whether the mutex is poisoned.
    ///
    /// If another thread is active, the mutex can still become poisoned at any
    /// time. You should not trust a `false` value for program correctness
    /// without additional synchronization.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::sync::{Arc, SgxMutex as Mutex};
    /// use std::thread;
    ///
    /// let mutex = Arc::new(Mutex::new(0));
    /// let c_mutex = Arc::clone(&mutex);
    ///
    /// let _ = thread::spawn(move || {
    ///     let _lock = c_mutex.lock().unwrap();
    ///     panic!(); // the mutex gets poisoned
    /// }).join();
    /// assert_eq!(mutex.is_poisoned(), true);
    /// ```
    #[inline]
    pub fn is_poisoned(&self) -> bool {
        self.poison.get()
    }

    /// Clear the poisoned state from a mutex
    ///
    /// If the mutex is poisoned, it will remain poisoned until this function is called. This
    /// allows recovering from a poisoned state and marking that it has recovered. For example, if
    /// the value is overwritten by a known-good value, then the mutex can be marked as
    /// un-poisoned. Or possibly, the value could be inspected to determine if it is in a
    /// consistent state, and if so the poison is removed.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(mutex_unpoison)]
    ///
    /// use std::sync::{Arc, SgxMutex as Mutex};
    /// use std::thread;
    ///
    /// let mutex = Arc::new(Mutex::new(0));
    /// let c_mutex = Arc::clone(&mutex);
    ///
    /// let _ = thread::spawn(move || {
    ///     let _lock = c_mutex.lock().unwrap();
    ///     panic!(); // the mutex gets poisoned
    /// }).join();
    ///
    /// assert_eq!(mutex.is_poisoned(), true);
    /// let x = mutex.lock().unwrap_or_else(|mut e| {
    ///     **e.get_mut() = 1;
    ///     mutex.clear_poison();
    ///     e.into_inner()
    /// });
    /// assert_eq!(mutex.is_poisoned(), false);
    /// assert_eq!(*x, 1);
    /// ```
    #[inline]
    pub fn clear_poison(&self) {
        self.poison.clear();
    }

    /// Consumes this mutex, returning the underlying data.
    ///
    /// # Errors
    ///
    /// If another user of this mutex panicked while holding the mutex, then
    /// this call will return an error instead.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::sync::SgxMutex as Mutex;
    ///
    /// let mutex = Mutex::new(0);
    /// assert_eq!(mutex.into_inner().unwrap(), 0);
    /// ```
    pub fn into_inner(self) -> LockResult<T>
    where
        T: Sized,
    {
        let data = self.data.into_inner();
        poison::map_result(self.poison.borrow(), |()| data)
    }

    /// Returns a mutable reference to the underlying data.
    ///
    /// Since this call borrows the `Mutex` mutably, no actual locking needs to
    /// take place -- the mutable borrow statically guarantees no locks exist.
    ///
    /// # Errors
    ///
    /// If another user of this mutex panicked while holding the mutex, then
    /// this call will return an error instead.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::sync::SgxMutex as Mutex;
    ///
    /// let mut mutex = Mutex::new(0);
    /// *mutex.get_mut().unwrap() = 10;
    /// assert_eq!(*mutex.lock().unwrap(), 10);
    /// ```
    pub fn get_mut(&mut self) -> LockResult<&mut T> {
        let data = self.data.get_mut();
        poison::map_result(self.poison.borrow(), |()| data)
    }
}

impl<T> From<T> for SgxMutex<T> {
    /// Creates a new mutex in an unlocked state ready for use.
    /// This is equivalent to [`Mutex::new`].
    fn from(t: T) -> Self {
        SgxMutex::new(t)
    }
}

impl<T: ?Sized + Default> Default for SgxMutex<T> {
    /// Creates a `SgxMutex<T>`, with the `Default` value for T.
    fn default() -> SgxMutex<T> {
        SgxMutex::new(Default::default())
    }
}

impl<T: ?Sized + fmt::Debug> fmt::Debug for SgxMutex<T> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        let mut d = f.debug_struct("SgxMutex");
        match self.try_lock() {
            Ok(guard) => {
                d.field("data", &&*guard);
            }
            Err(TryLockError::Poisoned(err)) => {
                d.field("data", &&**err.get_ref());
            }
            Err(TryLockError::WouldBlock) => {
                struct LockedPlaceholder;
                impl fmt::Debug for LockedPlaceholder {
                    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
                        f.write_str("<locked>")
                    }
                }
                d.field("data", &LockedPlaceholder);
            }
        }
        d.field("poisoned", &self.poison.get());
        d.finish_non_exhaustive()
    }
}

impl<'mutex, T: ?Sized> SgxMutexGuard<'mutex, T> {
    unsafe fn new(lock: &'mutex SgxMutex<T>) -> LockResult<SgxMutexGuard<'mutex, T>> {
        poison::map_result(lock.poison.guard(), |guard| SgxMutexGuard { lock, poison: guard })
    }
}

impl<T: ?Sized> Deref for SgxMutexGuard<'_, T> {
    type Target = T;

    fn deref(&self) -> &T {
        unsafe { &*self.lock.data.get() }
    }
}

impl<T: ?Sized> DerefMut for SgxMutexGuard<'_, T> {
    fn deref_mut(&mut self) -> &mut T {
        unsafe { &mut *self.lock.data.get() }
    }
}

impl<T: ?Sized> Drop for SgxMutexGuard<'_, T> {
    #[inline]
    fn drop(&mut self) {
        unsafe {
            self.lock.poison.done(&self.poison);
            self.lock.inner.raw_unlock();
        }
    }
}

impl<T: ?Sized + fmt::Debug> fmt::Debug for SgxMutexGuard<'_, T> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Debug::fmt(&**self, f)
    }
}

impl<T: ?Sized + fmt::Display> fmt::Display for SgxMutexGuard<'_, T> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        (**self).fmt(f)
    }
}

pub fn guard_lock<'a, T: ?Sized>(guard: &SgxMutexGuard<'a, T>) -> &'a sys::MovableMutex {
    &guard.lock.inner
}

pub fn guard_poison<'a, T: ?Sized>(guard: &SgxMutexGuard<'a, T>) -> &'a poison::Flag {
    &guard.lock.poison
}