source/infrastructure/cloudformation/cfn-networking.yaml

#-----------------------------------------------------------------------------------------------------------------------
#   Copyright Amazon.com Inc. or its affiliates. All Rights Reserved.
#
#  Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance
#  with the License. A copy of the License is located at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  or in the 'license' file accompanying this file. This file is distributed on an 'AS IS' BASIS, WITHOUT WARRANTIES
#  OR CONDITIONS OF ANY KIND, express or implied. See the License for the specific language governing permissions
#  and limitations under the License.
#-----------------------------------------------------------------------------------------------------------------------
---
AWSTemplateFormatVersion: '2010-09-09'
Description: 'CloudFormation Template to setup VPC, two private and public subnets, IGW, NAT Gateways and Routes'
Parameters:
  Environment:
    Description:  Name of environment.  Used to name the created resources.
    Type: String
    MinLength: 1
  VPCCIDR:
    Type: String
    Description: IP Address range for the VPC
    MinLength: '9'
    MaxLength: '18'
    Default: 10.1.0.0/16
    AllowedPattern: "(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})/(\\d{1,2})"
    ConstraintDescription: must be a valid IP CIDR range of the form x.x.x.x/x.
  PrivateSubnetOneCIDR:
    Type: String
    Description: IP Address range for the private Subnet 1
    MinLength: '9'
    MaxLength: '18'
    Default: 10.1.1.0/24
    AllowedPattern: "(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})/(\\d{1,2})"
    ConstraintDescription: must be a valid IP CIDR range of the form x.x.x.x/x.
  PrivateSubnetTwoCIDR:
    Type: String
    Description: IP Address range for the private Subnet 2
    MinLength: '9'
    MaxLength: '18'
    Default: 10.1.2.0/24
    AllowedPattern: "(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})/(\\d{1,2})"
    ConstraintDescription: must be a valid IP CIDR range of the form x.x.x.x/x.
  PublicSubnetOneCIDR:
    Type: String
    Description: IP Address range for the public Subnet 1
    MinLength: '9'
    MaxLength: '18'
    Default: 10.1.3.0/24
    AllowedPattern: "(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})/(\\d{1,2})"
    ConstraintDescription: must be a valid IP CIDR range of the form x.x.x.x/x.
  PublicSubnetTwoCIDR:
    Type: String
    Description: IP Address range for the public Subnet 2
    MinLength: '9'
    MaxLength: '18'
    Default: 10.1.4.0/24
    AllowedPattern: "(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})\\.(\\d{1,3})/(\\d{1,2})"
    ConstraintDescription: must be a valid IP CIDR range of the form x.x.x.x/x.
  VPCFlowLogsLogGroupRetention:
    AllowedValues: [ 1, 3, 5, 7, 14, 30, 60, 90, 120, 150, 180, 365, 400, 545, 731, 1827, 3653 ]
    Default: 14
    Description: Number of days to retain the VPC Flow Logs in CloudWatch
    Type: String
  VPCFlowLogsLogFormat:
    AllowedPattern: '^(\$\{[a-z-]+\})$|^((\$\{[a-z-]+\} )*\$\{[a-z-]+\})$'
    Default:
      '${version} ${account-id} ${interface-id} ${srcaddr} ${dstaddr} ${srcport} ${dstport} ${protocol} ${packets} ${bytes} ${start} ${end} ${action}
          ${log-status}'
    Description:
      The fields to include in the flow log record, in the order in which they should appear. Specify the fields using the ${field-id} format,
      separated by spaces. Using the Default Format as the default value.
    Type: String
  VPCFlowLogsMaxAggregationInterval:
    AllowedValues: [ 60, 600 ]
    Default: 600
    Description:
      The maximum interval of time during which a flow of packets is captured and aggregated into a flow log record. You can specify 60 seconds (1
      minute) or 600 seconds (10 minutes).
    Type: String
  VPCFlowLogsTrafficType:
    AllowedValues: [ ACCEPT, ALL, REJECT ]
    Default: REJECT
    Description: The type of traffic to log. You can log traffic that the resource accepts or rejects, or all traffic.
    Type: String

  ExistingVpcId:
    Description: Use existing instead of creating a new one.
    Type: String
  ExistingCDFSecurityGroupId:
    Description: Use existing instead of creating a new one.
    Type: String
  ExistingPrivateSubnetIds:
    Description: Use existing instead of creating a new one.
    Type: String
  ExistingPublicSubnetIds:
    Description: Existing Public Subnet Ids
    Type: String
  ExistingPrivateRouteTableIds:
    Description: Use existing instead of creating a new one.
    Type: String
  ExistingPrivateApiGatewayVPCEndpoint:
    Description: Use existing instead of creating a new one.
    Type: String

  EnableS3VpcEndpoint:
    Type: String
    Default: 'false'
    AllowedValues:
      - 'true'
      - 'false'
    Description: Enable S3 Vpc Endpoint

  EnableDynamoDBVpcEndpoint:
    Type: String
    Default: 'false'
    AllowedValues:
      - 'true'
      - 'false'
    Description: Enable DynamoDB Vpc Endpoint

  EnablePrivateApiGatewayVPCEndpoint:
    Type: String
    Default: 'false'
    AllowedValues:
      - 'true'
      - 'false'
    Description: Enable Private API Vpc Endpoint

Conditions:
  Deploy: !Equals [ !Ref ExistingVpcId, 'N/A' ]
  DeployS3VpcEndpoint: !Equals [ !Ref EnableS3VpcEndpoint, 'true']
  DeployDynamoDBVpcEndpoint: !Equals [ !Ref EnableDynamoDBVpcEndpoint, 'true']
  DeployPrivateApiVpcEndpoint: !Equals [ !Ref EnablePrivateApiGatewayVPCEndpoint, 'true']
  PrivateApiGatewayVPCEndpointInUse: !Or [ !Equals [ !Ref EnablePrivateApiGatewayVPCEndpoint, 'true'], !Not [ !Equals [ !Ref ExistingPrivateApiGatewayVPCEndpoint, '' ] ] ]

Resources:
  VPC:
    Condition: Deploy
    Type: AWS::EC2::VPC
    Properties:
      EnableDnsSupport: 'true'
      EnableDnsHostnames: 'true'
      CidrBlock: !Ref VPCCIDR

  PrivateSubnetOne:
    Condition: Deploy
    Type: AWS::EC2::Subnet
    Properties:
      VpcId: !Ref VPC
      AvailabilityZone: !Select
        - 0
        - Fn::GetAZs: !Ref 'AWS::Region'
      CidrBlock: !Ref PrivateSubnetOneCIDR

  PrivateSubnetTwo:
    Condition: Deploy
    Type: AWS::EC2::Subnet
    Properties:
      VpcId: !Ref VPC
      AvailabilityZone: !Select
        - 1
        - Fn::GetAZs: !Ref 'AWS::Region'
      CidrBlock: !Ref PrivateSubnetTwoCIDR

  PrivateSubnetNacl:
    Condition: Deploy
    Type: AWS::EC2::NetworkAcl
    Properties:
      VpcId: !Ref VPC

  PrivateSubnetOneNaclAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetNetworkAclAssociation
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      SubnetId: !Ref PrivateSubnetOne

  PrivateSubnetTwoNaclAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetNetworkAclAssociation
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      SubnetId: !Ref PrivateSubnetTwo

  PrivateSubnetNatResponseInboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      RuleNumber: 100
      Protocol: 6
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 1024
        To: 65535

  PrivateSubnetHttpsInboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      RuleNumber: 101
      Protocol: 6
      RuleAction: allow
      CidrBlock: !Ref VPCCIDR
      PortRange:
        From: 443
        To: 443

  PrivateSubnetGremlinInboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      RuleNumber: 102
      Protocol: 6
      RuleAction: allow
      CidrBlock: !Ref VPCCIDR
      PortRange:
        From: 8182
        To: 8182

  PrivateSubnetGremlinOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      RuleNumber: 100
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: !Ref VPCCIDR
      PortRange:
        From: 8182
        To: 8182

  PrivateSubnetHttpsOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      RuleNumber: 101
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 443
        To: 443

  PrivateSubnetResponseOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      RuleNumber: 102
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: !Ref VPCCIDR
      PortRange:
        From: 1024
        To: 65535

  PrivateSubnetMqttOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PrivateSubnetNacl
      RuleNumber: 103
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 8883
        To: 8883

  PublicSubnetOne:
    Condition: Deploy
    Type: AWS::EC2::Subnet
    Properties:
      VpcId: !Ref VPC
      AvailabilityZone: !Select
        - 0
        - Fn::GetAZs: !Ref 'AWS::Region'
      CidrBlock: !Ref PublicSubnetOneCIDR

  PublicSubnetTwo:
    Condition: Deploy
    Type: AWS::EC2::Subnet
    Properties:
      VpcId: !Ref VPC
      AvailabilityZone: !Select
        - 1
        - Fn::GetAZs: !Ref 'AWS::Region'
      CidrBlock: !Ref PublicSubnetTwoCIDR

  PublicSubnetNacl:
    Condition: Deploy
    Type: AWS::EC2::NetworkAcl
    Properties:
      VpcId: !Ref VPC

  PublicSubnetOneNaclAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetNetworkAclAssociation
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      SubnetId: !Ref PublicSubnetOne

  PublicSubnetTwoNaclAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetNetworkAclAssociation
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      SubnetId: !Ref PublicSubnetTwo

  PublicSubnetReturnTrafficInboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 100
      Protocol: 6
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 1024
        To: 65535

  PublicSubnetSshInboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 101
      Protocol: 6
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 22
        To: 22

  PublicSubnetHttpsInboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 102
      Protocol: 6
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 443
        To: 443

  PublicSubnetIcmpInboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 103
      Protocol: 1
      Icmp:
        Code: -1
        Type: -1
      RuleAction: allow
      CidrBlock: 0.0.0.0/0

  PublicSubnetHttpsOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 100
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 443
        To: 443

  PublicSubnetGremlinOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 101
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: !Ref VPCCIDR
      PortRange:
        From: 8182
        To: 8182

  PublicSubnetHttpOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 103
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 80
        To: 80

  PublicSubnetResponseOutboundRule:
    Condition: Deploy
    Type: AWS::EC2::NetworkAclEntry
    Properties:
      NetworkAclId: !Ref PublicSubnetNacl
      RuleNumber: 102
      Protocol: 6
      Egress: true
      RuleAction: allow
      CidrBlock: 0.0.0.0/0
      PortRange:
        From: 1024
        To: 65535

  InternetGateway:
    Condition: Deploy
    Type: AWS::EC2::InternetGateway

  GatewayToInternet:
    Condition: Deploy
    Type: AWS::EC2::VPCGatewayAttachment
    Properties:
      VpcId: !Ref VPC
      InternetGatewayId: !Ref InternetGateway

  NATGatewayOne:
    Condition: Deploy
    DependsOn: GatewayToInternet
    Type: AWS::EC2::NatGateway
    Properties:
      AllocationId:
        Fn::GetAtt:
        - ElasticIPOne
        - AllocationId
      SubnetId: !Ref PublicSubnetOne

  ElasticIPOne:
    Condition: Deploy
    Type: AWS::EC2::EIP
    Properties:
      Domain: vpc

  NATGatewayTwo:
    Condition: Deploy
    DependsOn: GatewayToInternet
    Type: AWS::EC2::NatGateway
    Properties:
      AllocationId:
        Fn::GetAtt:
        - ElasticIPTwo
        - AllocationId
      SubnetId: !Ref PublicSubnetTwo

  ElasticIPTwo:
    Condition: Deploy
    Type: AWS::EC2::EIP
    Properties:
      Domain: vpc

  PublicRouteTable:
    Condition: Deploy
    Type: AWS::EC2::RouteTable
    Properties:
      VpcId: !Ref VPC

  PublicRoute:
    Condition: Deploy
    Type: AWS::EC2::Route
    Properties:
      RouteTableId: !Ref PublicRouteTable
      DestinationCidrBlock: 0.0.0.0/0
      GatewayId: !Ref InternetGateway

  PublicSubnetOneRouteTableAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      SubnetId: !Ref PublicSubnetOne
      RouteTableId: !Ref PublicRouteTable

  PublicSubnetTwoRouteTableAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      SubnetId: !Ref PublicSubnetTwo
      RouteTableId: !Ref PublicRouteTable

  PrivateRouteTableOne:
    Condition: Deploy
    Type: AWS::EC2::RouteTable
    Properties:
      VpcId: !Ref VPC

  PrivateRouteToInternetOne:
    Condition: Deploy
    Type: AWS::EC2::Route
    Properties:
      RouteTableId: !Ref PrivateRouteTableOne
      DestinationCidrBlock: 0.0.0.0/0
      NatGatewayId: !Ref NATGatewayOne

  PrivateSubnetOneRouteTableAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      SubnetId: !Ref PrivateSubnetOne
      RouteTableId: !Ref PrivateRouteTableOne

  PrivateRouteTableTwo:
    Condition: Deploy
    Type: AWS::EC2::RouteTable
    Properties:
      VpcId: !Ref VPC

  PrivateRouteToInternetTwo:
    Condition: Deploy
    Type: AWS::EC2::Route
    Properties:
      RouteTableId: !Ref PrivateRouteTableTwo
      DestinationCidrBlock: 0.0.0.0/0
      NatGatewayId: !Ref NATGatewayTwo

  PrivateSubnetTwoRouteTableAssociation:
    Condition: Deploy
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      SubnetId: !Ref PrivateSubnetTwo
      RouteTableId: !Ref PrivateRouteTableTwo

  CDFSecurityGroup:
    Condition: Deploy
    Type: AWS::EC2::SecurityGroup
    Metadata:
      cfn_nag:
        rules_to_suppress:
          - id: W5
            reason: "Relying on default egress"
          - id: W29
            reason: "Relying on default egress port"
          - id: W36
            reason: "Group Description provided"
    Properties:
      GroupDescription: CDF security group
      VpcId: !Ref VPC
      SecurityGroupEgress:
        - IpProtocol: tcp
          FromPort: 2772
          ToPort: 2772 # AppConfig local endpoint
          CidrIp: 0.0.0.0/0
        - IpProtocol: tcp
          FromPort: 80
          ToPort: 80
          CidrIp: 0.0.0.0/0
        - IpProtocol: tcp
          FromPort: 443
          ToPort: 443
          CidrIp: 0.0.0.0/0
        - IpProtocol: tcp
          FromPort: 8182
          ToPort: 8182 # Neptune endpoint
          CidrIp: 0.0.0.0/0
        - IpProtocol: tcp
          FromPort: 8111
          ToPort: 8111 # Neptune endpoint
          CidrIp: 0.0.0.0/0

  S3Endpoint:
    Type: "AWS::EC2::VPCEndpoint"
    Condition: DeployS3VpcEndpoint
    Properties:
      PolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal: '*'
            Action:
              - 's3:*'
            Resource:
              - '*'
      RouteTableIds: !If [ Deploy, [ !Ref PrivateRouteTableOne, !Ref PrivateRouteTableTwo ] , !Split [ ',', !Ref ExistingPrivateRouteTableIds ]]
      ServiceName: !Join
        - ''
        - - com.amazonaws.
          - !Ref 'AWS::Region'
          - .s3
      VpcId: !If [ Deploy, !Ref VPC, !Ref ExistingVpcId]

  DynamoDBVpcEndpoint:
    Type: "AWS::EC2::VPCEndpoint"
    Condition: DeployDynamoDBVpcEndpoint
    Properties:
      PolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal: '*'
            Action:
              - 'dynamodb:*'
            Resource:
              - '*'
      RouteTableIds: !If [ Deploy, [ !Ref PrivateRouteTableOne, !Ref PrivateRouteTableTwo ] , !Split [ ',', !Ref ExistingPrivateRouteTableIds ]]
      ServiceName: !Join
        - ''
        - - com.amazonaws.
          - !Ref 'AWS::Region'
          - .dynamodb
      VpcId: !If [ Deploy, !Ref VPC, !Ref ExistingVpcId]

  PrivateApiGatewayVPCEndpoint:
    Condition: DeployPrivateApiVpcEndpoint
    Type: AWS::EC2::VPCEndpoint
    Properties:
      PrivateDnsEnabled: true
      ServiceName: !Sub com.amazonaws.${AWS::Region}.execute-api
      VpcEndpointType: Interface
      VpcId: !If [ Deploy, !GetAtt CDFSecurityGroup.VpcId, !Ref ExistingVpcId]
      SubnetIds: !If [ Deploy, [ !Ref PrivateSubnetOne, !Ref PrivateSubnetTwo ], !Split [ ',', !Ref ExistingPrivateSubnetIds ]]
      SecurityGroupIds:
        - !If [ Deploy, !GetAtt CDFSecurityGroup.GroupId, !Ref ExistingCDFSecurityGroupId]

  VPCFlowLogsLogGroup:
    Condition: Deploy
    Type: AWS::Logs::LogGroup
    Properties:
      RetentionInDays: !Ref VPCFlowLogsLogGroupRetention

  VPCFlowLogsRole:
    Condition: Deploy
    Type: AWS::IAM::Role
    Properties:
      Description: Rights to Publish VPC Flow Logs to CloudWatch Logs
      AssumeRolePolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Action: sts:AssumeRole
            Principal:
              Service:
                - vpc-flow-logs.amazonaws.com
      Path: /
      Tags:
        - Key: StackName
          Value: !Ref AWS::StackName
      Policies:
        - PolicyName: CloudWatchLogGroup
          PolicyDocument:
            Version: 2012-10-17
            Statement:
              - Sid: CloudWatchLogs
                Effect: Allow
                Action:
                  - logs:CreateLogStream
                  - logs:PutLogEvents
                  - logs:DescribeLogGroups
                  - logs:DescribeLogStreams
                Resource: !GetAtt VPCFlowLogsLogGroup.Arn

  VPCFlowLogsToCloudWatch:
    Condition: Deploy
    Type: AWS::EC2::FlowLog
    Properties:
      LogDestinationType: cloud-watch-logs
      LogGroupName: !Ref VPCFlowLogsLogGroup
      DeliverLogsPermissionArn: !GetAtt VPCFlowLogsRole.Arn
      LogFormat: !Ref VPCFlowLogsLogFormat
      MaxAggregationInterval: !Ref VPCFlowLogsMaxAggregationInterval
      ResourceId: !Ref VPC
      ResourceType: VPC
      TrafficType: !Ref VPCFlowLogsTrafficType

  VpcIdSsmParameter:
    Type: "AWS::SSM::Parameter"
    Properties:
      Description: VPC ID for the account
      Name: !Sub '/cdf/networking/${Environment}/VpcId'
      Type: String
      Value: !If [Deploy, !Ref VPC, !Ref ExistingVpcId]

  PrivateSubnetIdsSsmParameter:
    Type: "AWS::SSM::Parameter"
    Properties:
      Description: Private subnet ids
      Name: !Sub '/cdf/networking/${Environment}/PrivateSubnetIds'
      Type: StringList
      Value:
        !If [
            Deploy,
            !Join [",", [!Ref PrivateSubnetOne, !Ref PrivateSubnetTwo]],
            !Ref ExistingPrivateSubnetIds,
        ]

  PublicSubnetIdsSsmParameter:
    Type: "AWS::SSM::Parameter"
    Properties:
      Description: Public subnet ids
      Name: !Sub '/cdf/networking/${Environment}/PublicSubnetIds'
      Type: StringList
      Value: !If [Deploy,!Join [",", [!Ref PublicSubnetOne, !Ref PublicSubnetTwo]], !Ref ExistingPublicSubnetIds,]

  PrivateRouteTableIdsSsmParameter:
    Type: "AWS::SSM::Parameter"
    Properties:
      Description: Private Route Table Ids
      Name: !Sub '/cdf/networking/${Environment}/PrivateRouteTableIds'
      Type: StringList
      Value:
        !If [
            Deploy,
            !Join [",", [!Ref PrivateRouteTableOne, !Ref PrivateRouteTableTwo]],
            !Ref ExistingPrivateRouteTableIds,
        ]

  CDFSecurityGroupIdSsmParameter:
    Type: "AWS::SSM::Parameter"
    Properties:
      Description: CDF security group
      Name: !Sub '/cdf/networking/${Environment}/CDFSecurityGroupId'
      Type: String
      Value:
        !If [
            Deploy,
            !GetAtt CDFSecurityGroup.GroupId,
            !Ref ExistingCDFSecurityGroupId,
        ]

Outputs:
  VpcId:
    Description: VpcId
    Value: !If [ Deploy, !Ref VPC, !Ref ExistingVpcId]
    Export:
      Name: !Sub 'cdf-network-${Environment}-VpcId'
  PrivateSubnetIds:
    Description: Private subnet ids
    Value: !If [ Deploy, !Join [ ',', [ !Ref PrivateSubnetOne, !Ref PrivateSubnetTwo ] ], !Ref ExistingPrivateSubnetIds]
    Export:
      Name: !Sub 'cdf-network-${Environment}-PrivateSubnetIds'
  PublicSubnetIds:
    Description: Public subnet ids
    Value: !If [ Deploy, !Join [ ',', [ !Ref PublicSubnetOne, !Ref PublicSubnetTwo ] ], !Ref ExistingPublicSubnetIds ]
    Export:
      Name: !Sub 'cdf-network-${Environment}-PublicSubnetIds'
  PrivateRouteTableIds:
    Description: Private route table ids
    Value: !If [ Deploy, !Join [ ',', [ !Ref PrivateRouteTableOne, !Ref PrivateRouteTableTwo ] ], !Ref ExistingPrivateRouteTableIds]
    Export:
      Name: !Sub 'cdf-network-${Environment}-PrivateRouteTableIds'
  CDFSecurityGroupId:
    Description: CDF security group
    Value: !If [ Deploy, !GetAtt CDFSecurityGroup.GroupId, !Ref ExistingCDFSecurityGroupId]
    Export:
      Name: !Sub 'cdf-network-${Environment}-SecurityGroupId'
  PrivateApiGatewayVPCEndpoint:
    Condition: PrivateApiGatewayVPCEndpointInUse
    Description: VPC endpoint for private api support
    Value: !If [ DeployPrivateApiVpcEndpoint, !Ref PrivateApiGatewayVPCEndpoint, !Ref ExistingPrivateApiGatewayVPCEndpoint]
    Export:
      Name: !Sub 'cdf-network-${Environment}-PrivateApiGatewayVPCEndpoint'