modules/AWSPowerShell/Cmdlets/RDS/Basic/Restore-RDSDBClusterFromSnapshot-Cmdlet.cs

/******************************************************************************* * Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved. * Licensed under the Apache License, Version 2.0 (the "License"). You may not use * this file except in compliance with the License. A copy of the License is located at * * http://aws.amazon.com/apache2.0 * * or in the "license" file accompanying this file. * This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR * CONDITIONS OF ANY KIND, either express or implied. See the License for the * specific language governing permissions and limitations under the License. * ***************************************************************************** * * AWS Tools for Windows (TM) PowerShell (TM) * */ using System; using System.Collections.Generic; using System.Linq; using System.Management.Automation; using System.Text; using Amazon.PowerShell.Common; using Amazon.Runtime; using Amazon.RDS; using Amazon.RDS.Model; namespace Amazon.PowerShell.Cmdlets.RDS { /// <summary> /// Creates a new DB cluster from a DB snapshot or DB cluster snapshot. /// /// /// <para> /// The target DB cluster is created from the source snapshot with a default configuration. /// If you don't specify a security group, the new DB cluster is associated with the default /// security group. /// </para><note><para> /// This operation only restores the DB cluster, not the DB instances for that DB cluster. /// You must invoke the <c>CreateDBInstance</c> operation to create DB instances for the /// restored DB cluster, specifying the identifier of the restored DB cluster in <c>DBClusterIdentifier</c>. /// You can create DB instances only after the <c>RestoreDBClusterFromSnapshot</c> operation /// has completed and the DB cluster is available. /// </para></note><para> /// For more information on Amazon Aurora DB clusters, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/CHAP_AuroraOverview.html"> /// What is Amazon Aurora?</a> in the Amazon Aurora User Guide. /// </para><para> /// For more information on Multi-AZ DB clusters, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/multi-az-db-clusters-concepts.html"> /// Multi-AZ DB cluster deployments</a> in the Amazon RDS User Guide.</para> /// </summary> [Cmdlet("Restore", "RDSDBClusterFromSnapshot", SupportsShouldProcess = true, ConfirmImpact = ConfirmImpact.Medium)] [OutputType("Amazon.RDS.Model.DBCluster")] [AWSCmdlet("Calls the Amazon Relational Database Service RestoreDBClusterFromSnapshot API operation.", Operation = new[] {"RestoreDBClusterFromSnapshot"}, SelectReturnType = typeof(Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse))] [AWSCmdletOutput("Amazon.RDS.Model.DBCluster or Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse", "This cmdlet returns an Amazon.RDS.Model.DBCluster object.", "The service call response (type Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse) can be returned by specifying '-Select *'." )] public partial class RestoreRDSDBClusterFromSnapshotCmdlet : AmazonRDSClientCmdlet, IExecutor { protected override bool IsGeneratedCmdlet { get; set; } = true; #region Parameter ScalingConfiguration_AutoPause /// <summary> /// <para> /// <para>Indicates whether to allow or disallow automatic pause for an Aurora DB cluster in /// <c>serverless</c> DB engine mode. A DB cluster can be paused only when it's idle (it /// has no connections).</para><note><para>If a DB cluster is paused for more than seven days, the DB cluster might be backed /// up with a snapshot. In this case, the DB cluster is restored when there is a request /// to connect to it.</para></note> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Boolean? ScalingConfiguration_AutoPause { get; set; } #endregion #region Parameter AvailabilityZone /// <summary> /// <para> /// <para>Provides the list of Availability Zones (AZs) where instances in the restored DB cluster /// can be created.</para><para>Valid for: Aurora DB clusters only</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] [Alias("AvailabilityZones")] public System.String[] AvailabilityZone { get; set; } #endregion #region Parameter BacktrackWindow /// <summary> /// <para> /// <para>The target backtrack window, in seconds. To disable backtracking, set this value to /// 0.</para><note><para>Currently, Backtrack is only supported for Aurora MySQL DB clusters.</para></note><para>Default: 0</para><para>Constraints:</para><ul><li><para>If specified, this value must be set to a number from 0 to 259,200 (72 hours).</para></li></ul><para>Valid for: Aurora DB clusters only</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int64? BacktrackWindow { get; set; } #endregion #region Parameter CopyTagsToSnapshot /// <summary> /// <para> /// <para>Specifies whether to copy all tags from the restored DB cluster to snapshots of the /// restored DB cluster. The default is not to copy them.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Boolean? CopyTagsToSnapshot { get; set; } #endregion #region Parameter DatabaseName /// <summary> /// <para> /// <para>The database name for the restored DB cluster.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String DatabaseName { get; set; } #endregion #region Parameter DBClusterIdentifier /// <summary> /// <para> /// <para>The name of the DB cluster to create from the DB snapshot or DB cluster snapshot. /// This parameter isn't case-sensitive.</para><para>Constraints:</para><ul><li><para>Must contain from 1 to 63 letters, numbers, or hyphens</para></li><li><para>First character must be a letter</para></li><li><para>Can't end with a hyphen or contain two consecutive hyphens</para></li></ul><para>Example: <c>my-snapshot-id</c></para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> #if !MODULAR [System.Management.Automation.Parameter(Position = 0, ValueFromPipelineByPropertyName = true, ValueFromPipeline = true)] #else [System.Management.Automation.Parameter(Position = 0, ValueFromPipelineByPropertyName = true, ValueFromPipeline = true, Mandatory = true)] [System.Management.Automation.AllowEmptyString] [System.Management.Automation.AllowNull] #endif [Amazon.PowerShell.Common.AWSRequiredParameter] public System.String DBClusterIdentifier { get; set; } #endregion #region Parameter DBClusterInstanceClass /// <summary> /// <para> /// <para>The compute and memory capacity of the each DB instance in the Multi-AZ DB cluster, /// for example db.m6gd.xlarge. Not all DB instance classes are available in all Amazon /// Web Services Regions, or for all database engines.</para><para>For the full list of DB instance classes, and availability for your engine, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/Concepts.DBInstanceClass.html">DB /// Instance Class</a> in the Amazon RDS User Guide.</para><para>Valid for: Multi-AZ DB clusters only</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String DBClusterInstanceClass { get; set; } #endregion #region Parameter DBClusterParameterGroupName /// <summary> /// <para> /// <para>The name of the DB cluster parameter group to associate with this DB cluster. If this /// argument is omitted, the default DB cluster parameter group for the specified engine /// is used.</para><para>Constraints:</para><ul><li><para>If supplied, must match the name of an existing default DB cluster parameter group.</para></li><li><para>Must be 1 to 255 letters, numbers, or hyphens.</para></li><li><para>First character must be a letter.</para></li><li><para>Can't end with a hyphen or contain two consecutive hyphens.</para></li></ul><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String DBClusterParameterGroupName { get; set; } #endregion #region Parameter DBSubnetGroupName /// <summary> /// <para> /// <para>The name of the DB subnet group to use for the new DB cluster.</para><para>Constraints: If supplied, must match the name of an existing DB subnet group.</para><para>Example: <c>mydbsubnetgroup</c></para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String DBSubnetGroupName { get; set; } #endregion #region Parameter DeletionProtection /// <summary> /// <para> /// <para>Specifies whether to enable deletion protection for the DB cluster. The database can't /// be deleted when deletion protection is enabled. By default, deletion protection isn't /// enabled.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Boolean? DeletionProtection { get; set; } #endregion #region Parameter Domain /// <summary> /// <para> /// <para>The Active Directory directory ID to restore the DB cluster in. The domain must be /// created prior to this operation. Currently, only MySQL, Microsoft SQL Server, Oracle, /// and PostgreSQL DB instances can be created in an Active Directory Domain.</para><para>For more information, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/kerberos-authentication.html"> /// Kerberos Authentication</a> in the Amazon RDS User Guide.</para><para>Valid for: Aurora DB clusters only</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String Domain { get; set; } #endregion #region Parameter DomainIAMRoleName /// <summary> /// <para> /// <para>The name of the IAM role to be used when making API calls to the Directory Service.</para><para>Valid for: Aurora DB clusters only</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String DomainIAMRoleName { get; set; } #endregion #region Parameter EnableCloudwatchLogsExport /// <summary> /// <para> /// <para>The list of logs that the restored DB cluster is to export to Amazon CloudWatch Logs. /// The values in the list depend on the DB engine being used.</para><para>RDS for MySQL</para><para>Possible values are <c>error</c>, <c>general</c>, <c>slowquery</c>, and <c>iam-db-auth-error</c>.</para><para>RDS for PostgreSQL</para><para>Possible values are <c>postgresql</c>, <c>upgrade</c>, and <c>iam-db-auth-error</c>.</para><para>Aurora MySQL</para><para>Possible values are <c>audit</c>, <c>error</c>, <c>general</c>, <c>instance</c>, <c>slowquery</c>, /// and <c>iam-db-auth-error</c>.</para><para>Aurora PostgreSQL</para><para>Possible value are <c>instance</c>, <c>postgresql</c>, and <c>iam-db-auth-error</c>.</para><para>For more information about exporting CloudWatch Logs for Amazon RDS, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/USER_LogAccess.html#USER_LogAccess.Procedural.UploadtoCloudWatch">Publishing /// Database Logs to Amazon CloudWatch Logs</a> in the Amazon RDS User Guide.</para><para>For more information about exporting CloudWatch Logs for Amazon Aurora, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/USER_LogAccess.html#USER_LogAccess.Procedural.UploadtoCloudWatch">Publishing /// Database Logs to Amazon CloudWatch Logs</a> in the Amazon Aurora User Guide.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] [Alias("EnableCloudwatchLogsExports")] public System.String[] EnableCloudwatchLogsExport { get; set; } #endregion #region Parameter EnableIAMDatabaseAuthentication /// <summary> /// <para> /// <para>Specifies whether to enable mapping of Amazon Web Services Identity and Access Management /// (IAM) accounts to database accounts. By default, mapping isn't enabled.</para><para>For more information, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/UsingWithRDS.IAMDBAuth.html"> /// IAM Database Authentication</a> in the Amazon Aurora User Guide or <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/UsingWithRDS.IAMDBAuth.html"> /// IAM database authentication for MariaDB, MySQL, and PostgreSQL</a> in the Amazon /// RDS User Guide.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Boolean? EnableIAMDatabaseAuthentication { get; set; } #endregion #region Parameter EnablePerformanceInsight /// <summary> /// <para> /// <para>Specifies whether to turn on Performance Insights for the DB cluster.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] [Alias("EnablePerformanceInsights")] public System.Boolean? EnablePerformanceInsight { get; set; } #endregion #region Parameter Engine /// <summary> /// <para> /// <para>The database engine to use for the new DB cluster.</para><para>Default: The same as source</para><para>Constraint: Must be compatible with the engine of the source</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> #if !MODULAR [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] #else [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true, Mandatory = true)] [System.Management.Automation.AllowEmptyString] [System.Management.Automation.AllowNull] #endif [Amazon.PowerShell.Common.AWSRequiredParameter] public System.String Engine { get; set; } #endregion #region Parameter EngineLifecycleSupport /// <summary> /// <para> /// <para>The life cycle type for this DB cluster.</para><note><para>By default, this value is set to <c>open-source-rds-extended-support</c>, which enrolls /// your DB cluster into Amazon RDS Extended Support. At the end of standard support, /// you can avoid charges for Extended Support by setting the value to <c>open-source-rds-extended-support-disabled</c>. /// In this case, RDS automatically upgrades your restored DB cluster to a higher engine /// version, if the major engine version is past its end of standard support date.</para></note><para>You can use this setting to enroll your DB cluster into Amazon RDS Extended Support. /// With RDS Extended Support, you can run the selected major engine version on your DB /// cluster past the end of standard support for that engine version. For more information, /// see the following sections:</para><ul><li><para>Amazon Aurora - <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/extended-support.html">Using /// Amazon RDS Extended Support</a> in the Amazon Aurora User Guide</para></li><li><para>Amazon RDS - <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/extended-support.html">Using /// Amazon RDS Extended Support</a> in the Amazon RDS User Guide</para></li></ul><para>Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters</para><para>Valid Values: <c>open-source-rds-extended-support | open-source-rds-extended-support-disabled</c></para><para>Default: <c>open-source-rds-extended-support</c></para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String EngineLifecycleSupport { get; set; } #endregion #region Parameter EngineMode /// <summary> /// <para> /// <para>The DB engine mode of the DB cluster, either <c>provisioned</c> or <c>serverless</c>.</para><para>For more information, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/APIReference/API_CreateDBCluster.html"> /// CreateDBCluster</a>.</para><para>Valid for: Aurora DB clusters only</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String EngineMode { get; set; } #endregion #region Parameter EngineVersion /// <summary> /// <para> /// <para>The version of the database engine to use for the new DB cluster. If you don't specify /// an engine version, the default version for the database engine in the Amazon Web Services /// Region is used.</para><para>To list all of the available engine versions for Aurora MySQL, use the following command:</para><para><c>aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"</c></para><para>To list all of the available engine versions for Aurora PostgreSQL, use the following /// command:</para><para><c>aws rds describe-db-engine-versions --engine aurora-postgresql --query "DBEngineVersions[].EngineVersion"</c></para><para>To list all of the available engine versions for RDS for MySQL, use the following /// command:</para><para><c>aws rds describe-db-engine-versions --engine mysql --query "DBEngineVersions[].EngineVersion"</c></para><para>To list all of the available engine versions for RDS for PostgreSQL, use the following /// command:</para><para><c>aws rds describe-db-engine-versions --engine postgres --query "DBEngineVersions[].EngineVersion"</c></para><para>Aurora MySQL</para><para>See <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/AuroraMySQL.Updates.html">Database /// engine updates for Amazon Aurora MySQL</a> in the Amazon Aurora User Guide.</para><para>Aurora PostgreSQL</para><para>See <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/AuroraPostgreSQL.Updates.20180305.html">Amazon /// Aurora PostgreSQL releases and engine versions</a> in the Amazon Aurora User Guide.</para><para>MySQL</para><para>See <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_MySQL.html#MySQL.Concepts.VersionMgmt">Amazon /// RDS for MySQL</a> in the Amazon RDS User Guide.</para><para>PostgreSQL</para><para>See <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_PostgreSQL.html#PostgreSQL.Concepts">Amazon /// RDS for PostgreSQL versions and extensions</a> in the Amazon RDS User Guide.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String EngineVersion { get; set; } #endregion #region Parameter RdsCustomClusterConfiguration_InterconnectSubnetId /// <summary> /// <para> /// <para>Reserved for future use.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String RdsCustomClusterConfiguration_InterconnectSubnetId { get; set; } #endregion #region Parameter Iops /// <summary> /// <para> /// <para>The amount of Provisioned IOPS (input/output operations per second) to be initially /// allocated for each DB instance in the Multi-AZ DB cluster.</para><para>For information about valid IOPS values, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_Storage.html#USER_PIOPS">Amazon /// RDS Provisioned IOPS storage</a> in the Amazon RDS User Guide.</para><para>Constraints: Must be a multiple between .5 and 50 of the storage amount for the DB /// instance.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? Iops { get; set; } #endregion #region Parameter KmsKeyId /// <summary> /// <para> /// <para>The Amazon Web Services KMS key identifier to use when restoring an encrypted DB cluster /// from a DB snapshot or DB cluster snapshot.</para><para>The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias /// name for the KMS key. To use a KMS key in a different Amazon Web Services account, /// specify the key ARN or alias ARN.</para><para>When you don't specify a value for the <c>KmsKeyId</c> parameter, then the following /// occurs:</para><ul><li><para>If the DB snapshot or DB cluster snapshot in <c>SnapshotIdentifier</c> is encrypted, /// then the restored DB cluster is encrypted using the KMS key that was used to encrypt /// the DB snapshot or DB cluster snapshot.</para></li><li><para>If the DB snapshot or DB cluster snapshot in <c>SnapshotIdentifier</c> isn't encrypted, /// then the restored DB cluster isn't encrypted.</para></li></ul><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String KmsKeyId { get; set; } #endregion #region Parameter ScalingConfiguration_MaxCapacity /// <summary> /// <para> /// <para>The maximum capacity for an Aurora DB cluster in <c>serverless</c> DB engine mode.</para><para>For Aurora MySQL, valid capacity values are <c>1</c>, <c>2</c>, <c>4</c>, <c>8</c>, /// <c>16</c>, <c>32</c>, <c>64</c>, <c>128</c>, and <c>256</c>.</para><para>For Aurora PostgreSQL, valid capacity values are <c>2</c>, <c>4</c>, <c>8</c>, <c>16</c>, /// <c>32</c>, <c>64</c>, <c>192</c>, and <c>384</c>.</para><para>The maximum capacity must be greater than or equal to the minimum capacity.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? ScalingConfiguration_MaxCapacity { get; set; } #endregion #region Parameter ServerlessV2ScalingConfiguration_MaxCapacity /// <summary> /// <para> /// <para>The maximum number of Aurora capacity units (ACUs) for a DB instance in an Aurora /// Serverless v2 cluster. You can specify ACU values in half-step increments, such as /// 32, 32.5, 33, and so on. The largest value that you can use is 256 for recent Aurora /// versions, or 128 for older versions.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Double? ServerlessV2ScalingConfiguration_MaxCapacity { get; set; } #endregion #region Parameter ScalingConfiguration_MinCapacity /// <summary> /// <para> /// <para>The minimum capacity for an Aurora DB cluster in <c>serverless</c> DB engine mode.</para><para>For Aurora MySQL, valid capacity values are <c>1</c>, <c>2</c>, <c>4</c>, <c>8</c>, /// <c>16</c>, <c>32</c>, <c>64</c>, <c>128</c>, and <c>256</c>.</para><para>For Aurora PostgreSQL, valid capacity values are <c>2</c>, <c>4</c>, <c>8</c>, <c>16</c>, /// <c>32</c>, <c>64</c>, <c>192</c>, and <c>384</c>.</para><para>The minimum capacity must be less than or equal to the maximum capacity.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? ScalingConfiguration_MinCapacity { get; set; } #endregion #region Parameter ServerlessV2ScalingConfiguration_MinCapacity /// <summary> /// <para> /// <para>The minimum number of Aurora capacity units (ACUs) for a DB instance in an Aurora /// Serverless v2 cluster. You can specify ACU values in half-step increments, such as /// 8, 8.5, 9, and so on. For Aurora versions that support the Aurora Serverless v2 auto-pause /// feature, the smallest value that you can use is 0. For versions that don't support /// Aurora Serverless v2 auto-pause, the smallest value that you can use is 0.5. </para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Double? ServerlessV2ScalingConfiguration_MinCapacity { get; set; } #endregion #region Parameter MonitoringInterval /// <summary> /// <para> /// <para>The interval, in seconds, between points when Enhanced Monitoring metrics are collected /// for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify <c>0</c>.</para><para>If <c>MonitoringRoleArn</c> is specified, also set <c>MonitoringInterval</c> to a /// value other than <c>0</c>.</para><para>Valid Values: <c>0 | 1 | 5 | 10 | 15 | 30 | 60</c></para><para>Default: <c>0</c></para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? MonitoringInterval { get; set; } #endregion #region Parameter MonitoringRoleArn /// <summary> /// <para> /// <para>The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced /// Monitoring metrics to Amazon CloudWatch Logs. An example is <c>arn:aws:iam:123456789012:role/emaccess</c>.</para><para>If <c>MonitoringInterval</c> is set to a value other than <c>0</c>, supply a <c>MonitoringRoleArn</c> /// value.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String MonitoringRoleArn { get; set; } #endregion #region Parameter NetworkType /// <summary> /// <para> /// <para>The network type of the DB cluster.</para><para>Valid Values:</para><ul><li><para><c>IPV4</c></para></li><li><para><c>DUAL</c></para></li></ul><para>The network type is determined by the <c>DBSubnetGroup</c> specified for the DB cluster. /// A <c>DBSubnetGroup</c> can support only the IPv4 protocol or the IPv4 and the IPv6 /// protocols (<c>DUAL</c>).</para><para>For more information, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/USER_VPC.WorkingWithRDSInstanceinaVPC.html"> /// Working with a DB instance in a VPC</a> in the Amazon Aurora User Guide.</para><para>Valid for: Aurora DB clusters only</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String NetworkType { get; set; } #endregion #region Parameter OptionGroupName /// <summary> /// <para> /// <para>The name of the option group to use for the restored DB cluster.</para><para>DB clusters are associated with a default option group that can't be modified.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String OptionGroupName { get; set; } #endregion #region Parameter PerformanceInsightsKMSKeyId /// <summary> /// <para> /// <para>The Amazon Web Services KMS key identifier for encryption of Performance Insights /// data.</para><para>The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias /// name for the KMS key.</para><para>If you don't specify a value for <c>PerformanceInsightsKMSKeyId</c>, then Amazon RDS /// uses your default KMS key. There is a default KMS key for your Amazon Web Services /// account. Your Amazon Web Services account has a different default KMS key for each /// Amazon Web Services Region.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String PerformanceInsightsKMSKeyId { get; set; } #endregion #region Parameter PerformanceInsightsRetentionPeriod /// <summary> /// <para> /// <para>The number of days to retain Performance Insights data.</para><para>Valid Values:</para><ul><li><para><c>7</c></para></li><li><para>month * 31, where month is a number of months from 1-23. Examples: /// <c>93</c> (3 months * 31), <c>341</c> (11 months * 31), <c>589</c> (19 months * 31)</para></li><li><para><c>731</c></para></li></ul><para>Default: <c>7</c> days</para><para>If you specify a retention period that isn't valid, such as <c>94</c>, Amazon RDS /// issues an error.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? PerformanceInsightsRetentionPeriod { get; set; } #endregion #region Parameter Port /// <summary> /// <para> /// <para>The port number on which the new DB cluster accepts connections.</para><para>Constraints: This value must be <c>1150-65535</c></para><para>Default: The same port as the original DB cluster.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? Port { get; set; } #endregion #region Parameter PubliclyAccessible /// <summary> /// <para> /// <para>Specifies whether the DB cluster is publicly accessible.</para><para>When the DB cluster is publicly accessible, its Domain Name System (DNS) endpoint /// resolves to the private IP address from within the DB cluster's virtual private cloud /// (VPC). It resolves to the public IP address from outside of the DB cluster's VPC. /// Access to the DB cluster is ultimately controlled by the security group it uses. That /// public access is not permitted if the security group assigned to the DB cluster doesn't /// permit it.</para><para>When the DB cluster isn't publicly accessible, it is an internal DB cluster with a /// DNS name that resolves to a private IP address.</para><para>Default: The default behavior varies depending on whether <c>DBSubnetGroupName</c> /// is specified.</para><para>If <c>DBSubnetGroupName</c> isn't specified, and <c>PubliclyAccessible</c> isn't specified, /// the following applies:</para><ul><li><para>If the default VPC in the target Region doesn’t have an internet gateway attached /// to it, the DB cluster is private.</para></li><li><para>If the default VPC in the target Region has an internet gateway attached to it, the /// DB cluster is public.</para></li></ul><para>If <c>DBSubnetGroupName</c> is specified, and <c>PubliclyAccessible</c> isn't specified, /// the following applies:</para><ul><li><para>If the subnets are part of a VPC that doesn’t have an internet gateway attached to /// it, the DB cluster is private.</para></li><li><para>If the subnets are part of a VPC that has an internet gateway attached to it, the /// DB cluster is public.</para></li></ul><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Boolean? PubliclyAccessible { get; set; } #endregion #region Parameter RdsCustomClusterConfiguration_ReplicaMode /// <summary> /// <para> /// <para>Reserved for future use.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] [AWSConstantClassSource("Amazon.RDS.ReplicaMode")] public Amazon.RDS.ReplicaMode RdsCustomClusterConfiguration_ReplicaMode { get; set; } #endregion #region Parameter ScalingConfiguration_SecondsBeforeTimeout /// <summary> /// <para> /// <para>The amount of time, in seconds, that Aurora Serverless v1 tries to find a scaling /// point to perform seamless scaling before enforcing the timeout action. The default /// is 300.</para><para>Specify a value between 60 and 600 seconds.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? ScalingConfiguration_SecondsBeforeTimeout { get; set; } #endregion #region Parameter ScalingConfiguration_SecondsUntilAutoPause /// <summary> /// <para> /// <para>The time, in seconds, before an Aurora DB cluster in <c>serverless</c> mode is paused.</para><para>Specify a value between 300 and 86,400 seconds.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? ScalingConfiguration_SecondsUntilAutoPause { get; set; } #endregion #region Parameter ServerlessV2ScalingConfiguration_SecondsUntilAutoPause /// <summary> /// <para> /// <para>Specifies the number of seconds an Aurora Serverless v2 DB instance must be idle before /// Aurora attempts to automatically pause it. </para><para>Specify a value between 300 seconds (five minutes) and 86,400 seconds (one day). The /// default is 300 seconds.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.Int32? ServerlessV2ScalingConfiguration_SecondsUntilAutoPause { get; set; } #endregion #region Parameter SnapshotIdentifier /// <summary> /// <para> /// <para>The identifier for the DB snapshot or DB cluster snapshot to restore from.</para><para>You can use either the name or the Amazon Resource Name (ARN) to specify a DB cluster /// snapshot. However, you can use only the ARN to specify a DB snapshot.</para><para>Constraints:</para><ul><li><para>Must match the identifier of an existing Snapshot.</para></li></ul><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> #if !MODULAR [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] #else [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true, Mandatory = true)] [System.Management.Automation.AllowEmptyString] [System.Management.Automation.AllowNull] #endif [Amazon.PowerShell.Common.AWSRequiredParameter] public System.String SnapshotIdentifier { get; set; } #endregion #region Parameter StorageType /// <summary> /// <para> /// <para>Specifies the storage type to be associated with the DB cluster.</para><para>When specified for a Multi-AZ DB cluster, a value for the <c>Iops</c> parameter is /// required.</para><para>Valid Values: <c>aurora</c>, <c>aurora-iopt1</c> (Aurora DB clusters); <c>io1</c> /// (Multi-AZ DB clusters)</para><para>Default: <c>aurora</c> (Aurora DB clusters); <c>io1</c> (Multi-AZ DB clusters)</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String StorageType { get; set; } #endregion #region Parameter Tag /// <summary> /// <para> /// <para>The tags to be assigned to the restored DB cluster.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] [Alias("Tags")] public Amazon.RDS.Model.Tag[] Tag { get; set; } #endregion #region Parameter ScalingConfiguration_TimeoutAction /// <summary> /// <para> /// <para>The action to take when the timeout is reached, either <c>ForceApplyCapacityChange</c> /// or <c>RollbackCapacityChange</c>.</para><para><c>ForceApplyCapacityChange</c> sets the capacity to the specified value as soon /// as possible.</para><para><c>RollbackCapacityChange</c>, the default, ignores the capacity change if a scaling /// point isn't found in the timeout period.</para><important><para>If you specify <c>ForceApplyCapacityChange</c>, connections that prevent Aurora Serverless /// v1 from finding a scaling point might be dropped.</para></important><para>For more information, see <a href="https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/aurora-serverless.how-it-works.html#aurora-serverless.how-it-works.auto-scaling"> /// Autoscaling for Aurora Serverless v1</a> in the Amazon Aurora User Guide.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String ScalingConfiguration_TimeoutAction { get; set; } #endregion #region Parameter RdsCustomClusterConfiguration_TransitGatewayMulticastDomainId /// <summary> /// <para> /// <para>Reserved for future use.</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public System.String RdsCustomClusterConfiguration_TransitGatewayMulticastDomainId { get; set; } #endregion #region Parameter VpcSecurityGroupId /// <summary> /// <para> /// <para>A list of VPC security groups that the new DB cluster will belong to.</para><para>Valid for: Aurora DB clusters and Multi-AZ DB clusters</para> /// </para> /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] [Alias("VpcSecurityGroupIds")] public System.String[] VpcSecurityGroupId { get; set; } #endregion #region Parameter Select /// <summary> /// Use the -Select parameter to control the cmdlet output. The default value is 'DBCluster'. /// Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse). /// Specifying the name of a property of type Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse will result in that property being returned. /// Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public string Select { get; set; } = "DBCluster"; #endregion #region Parameter PassThru /// <summary> /// Changes the cmdlet behavior to return the value passed to the DBClusterIdentifier parameter. /// The -PassThru parameter is deprecated, use -Select '^DBClusterIdentifier' instead. This parameter will be removed in a future version. /// </summary> [System.Obsolete("The -PassThru parameter is deprecated, use -Select '^DBClusterIdentifier' instead. This parameter will be removed in a future version.")] [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public SwitchParameter PassThru { get; set; } #endregion #region Parameter Force /// <summary> /// This parameter overrides confirmation prompts to force /// the cmdlet to continue its operation. This parameter should always /// be used with caution. /// </summary> [System.Management.Automation.Parameter(ValueFromPipelineByPropertyName = true)] public SwitchParameter Force { get; set; } #endregion protected override void ProcessRecord() { this._AWSSignerType = "v4"; base.ProcessRecord(); var resourceIdentifiersText = FormatParameterValuesForConfirmationMsg(nameof(this.DBClusterIdentifier), MyInvocation.BoundParameters); if (!ConfirmShouldProceed(this.Force.IsPresent, resourceIdentifiersText, "Restore-RDSDBClusterFromSnapshot (RestoreDBClusterFromSnapshot)")) { return; } var context = new CmdletContext(); // allow for manipulation of parameters prior to loading into context PreExecutionContextLoad(context); #pragma warning disable CS0618, CS0612 //A class member was marked with the Obsolete attribute if (ParameterWasBound(nameof(this.Select))) { context.Select = CreateSelectDelegate<Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse, RestoreRDSDBClusterFromSnapshotCmdlet>(Select) ?? throw new System.ArgumentException("Invalid value for -Select parameter.", nameof(this.Select)); if (this.PassThru.IsPresent) { throw new System.ArgumentException("-PassThru cannot be used when -Select is specified.", nameof(this.Select)); } } else if (this.PassThru.IsPresent) { context.Select = (response, cmdlet) => this.DBClusterIdentifier; } #pragma warning restore CS0618, CS0612 //A class member was marked with the Obsolete attribute if (this.AvailabilityZone != null) { context.AvailabilityZone = new List<System.String>(this.AvailabilityZone); } context.BacktrackWindow = this.BacktrackWindow; context.CopyTagsToSnapshot = this.CopyTagsToSnapshot; context.DatabaseName = this.DatabaseName; context.DBClusterIdentifier = this.DBClusterIdentifier; #if MODULAR if (this.DBClusterIdentifier == null && ParameterWasBound(nameof(this.DBClusterIdentifier))) { WriteWarning("You are passing $null as a value for parameter DBClusterIdentifier which is marked as required. In case you believe this parameter was incorrectly marked as required, report this by opening an issue at https://github.com/aws/aws-tools-for-powershell/issues."); } #endif context.DBClusterInstanceClass = this.DBClusterInstanceClass; context.DBClusterParameterGroupName = this.DBClusterParameterGroupName; context.DBSubnetGroupName = this.DBSubnetGroupName; context.DeletionProtection = this.DeletionProtection; context.Domain = this.Domain; context.DomainIAMRoleName = this.DomainIAMRoleName; if (this.EnableCloudwatchLogsExport != null) { context.EnableCloudwatchLogsExport = new List<System.String>(this.EnableCloudwatchLogsExport); } context.EnableIAMDatabaseAuthentication = this.EnableIAMDatabaseAuthentication; context.EnablePerformanceInsight = this.EnablePerformanceInsight; context.Engine = this.Engine; #if MODULAR if (this.Engine == null && ParameterWasBound(nameof(this.Engine))) { WriteWarning("You are passing $null as a value for parameter Engine which is marked as required. In case you believe this parameter was incorrectly marked as required, report this by opening an issue at https://github.com/aws/aws-tools-for-powershell/issues."); } #endif context.EngineLifecycleSupport = this.EngineLifecycleSupport; context.EngineMode = this.EngineMode; context.EngineVersion = this.EngineVersion; context.Iops = this.Iops; context.KmsKeyId = this.KmsKeyId; context.MonitoringInterval = this.MonitoringInterval; context.MonitoringRoleArn = this.MonitoringRoleArn; context.NetworkType = this.NetworkType; context.OptionGroupName = this.OptionGroupName; context.PerformanceInsightsKMSKeyId = this.PerformanceInsightsKMSKeyId; context.PerformanceInsightsRetentionPeriod = this.PerformanceInsightsRetentionPeriod; context.Port = this.Port; context.PubliclyAccessible = this.PubliclyAccessible; context.RdsCustomClusterConfiguration_InterconnectSubnetId = this.RdsCustomClusterConfiguration_InterconnectSubnetId; context.RdsCustomClusterConfiguration_ReplicaMode = this.RdsCustomClusterConfiguration_ReplicaMode; context.RdsCustomClusterConfiguration_TransitGatewayMulticastDomainId = this.RdsCustomClusterConfiguration_TransitGatewayMulticastDomainId; context.ScalingConfiguration_AutoPause = this.ScalingConfiguration_AutoPause; context.ScalingConfiguration_MaxCapacity = this.ScalingConfiguration_MaxCapacity; context.ScalingConfiguration_MinCapacity = this.ScalingConfiguration_MinCapacity; context.ScalingConfiguration_SecondsBeforeTimeout = this.ScalingConfiguration_SecondsBeforeTimeout; context.ScalingConfiguration_SecondsUntilAutoPause = this.ScalingConfiguration_SecondsUntilAutoPause; context.ScalingConfiguration_TimeoutAction = this.ScalingConfiguration_TimeoutAction; context.ServerlessV2ScalingConfiguration_MaxCapacity = this.ServerlessV2ScalingConfiguration_MaxCapacity; context.ServerlessV2ScalingConfiguration_MinCapacity = this.ServerlessV2ScalingConfiguration_MinCapacity; context.ServerlessV2ScalingConfiguration_SecondsUntilAutoPause = this.ServerlessV2ScalingConfiguration_SecondsUntilAutoPause; context.SnapshotIdentifier = this.SnapshotIdentifier; #if MODULAR if (this.SnapshotIdentifier == null && ParameterWasBound(nameof(this.SnapshotIdentifier))) { WriteWarning("You are passing $null as a value for parameter SnapshotIdentifier which is marked as required. In case you believe this parameter was incorrectly marked as required, report this by opening an issue at https://github.com/aws/aws-tools-for-powershell/issues."); } #endif context.StorageType = this.StorageType; if (this.Tag != null) { context.Tag = new List<Amazon.RDS.Model.Tag>(this.Tag); } if (this.VpcSecurityGroupId != null) { context.VpcSecurityGroupId = new List<System.String>(this.VpcSecurityGroupId); } // allow further manipulation of loaded context prior to processing PostExecutionContextLoad(context); var output = Execute(context) as CmdletOutput; ProcessOutput(output); } #region IExecutor Members public object Execute(ExecutorContext context) { var cmdletContext = context as CmdletContext; // create request var request = new Amazon.RDS.Model.RestoreDBClusterFromSnapshotRequest(); if (cmdletContext.AvailabilityZone != null) { request.AvailabilityZones = cmdletContext.AvailabilityZone; } if (cmdletContext.BacktrackWindow != null) { request.BacktrackWindow = cmdletContext.BacktrackWindow.Value; } if (cmdletContext.CopyTagsToSnapshot != null) { request.CopyTagsToSnapshot = cmdletContext.CopyTagsToSnapshot.Value; } if (cmdletContext.DatabaseName != null) { request.DatabaseName = cmdletContext.DatabaseName; } if (cmdletContext.DBClusterIdentifier != null) { request.DBClusterIdentifier = cmdletContext.DBClusterIdentifier; } if (cmdletContext.DBClusterInstanceClass != null) { request.DBClusterInstanceClass = cmdletContext.DBClusterInstanceClass; } if (cmdletContext.DBClusterParameterGroupName != null) { request.DBClusterParameterGroupName = cmdletContext.DBClusterParameterGroupName; } if (cmdletContext.DBSubnetGroupName != null) { request.DBSubnetGroupName = cmdletContext.DBSubnetGroupName; } if (cmdletContext.DeletionProtection != null) { request.DeletionProtection = cmdletContext.DeletionProtection.Value; } if (cmdletContext.Domain != null) { request.Domain = cmdletContext.Domain; } if (cmdletContext.DomainIAMRoleName != null) { request.DomainIAMRoleName = cmdletContext.DomainIAMRoleName; } if (cmdletContext.EnableCloudwatchLogsExport != null) { request.EnableCloudwatchLogsExports = cmdletContext.EnableCloudwatchLogsExport; } if (cmdletContext.EnableIAMDatabaseAuthentication != null) { request.EnableIAMDatabaseAuthentication = cmdletContext.EnableIAMDatabaseAuthentication.Value; } if (cmdletContext.EnablePerformanceInsight != null) { request.EnablePerformanceInsights = cmdletContext.EnablePerformanceInsight.Value; } if (cmdletContext.Engine != null) { request.Engine = cmdletContext.Engine; } if (cmdletContext.EngineLifecycleSupport != null) { request.EngineLifecycleSupport = cmdletContext.EngineLifecycleSupport; } if (cmdletContext.EngineMode != null) { request.EngineMode = cmdletContext.EngineMode; } if (cmdletContext.EngineVersion != null) { request.EngineVersion = cmdletContext.EngineVersion; } if (cmdletContext.Iops != null) { request.Iops = cmdletContext.Iops.Value; } if (cmdletContext.KmsKeyId != null) { request.KmsKeyId = cmdletContext.KmsKeyId; } if (cmdletContext.MonitoringInterval != null) { request.MonitoringInterval = cmdletContext.MonitoringInterval.Value; } if (cmdletContext.MonitoringRoleArn != null) { request.MonitoringRoleArn = cmdletContext.MonitoringRoleArn; } if (cmdletContext.NetworkType != null) { request.NetworkType = cmdletContext.NetworkType; } if (cmdletContext.OptionGroupName != null) { request.OptionGroupName = cmdletContext.OptionGroupName; } if (cmdletContext.PerformanceInsightsKMSKeyId != null) { request.PerformanceInsightsKMSKeyId = cmdletContext.PerformanceInsightsKMSKeyId; } if (cmdletContext.PerformanceInsightsRetentionPeriod != null) { request.PerformanceInsightsRetentionPeriod = cmdletContext.PerformanceInsightsRetentionPeriod.Value; } if (cmdletContext.Port != null) { request.Port = cmdletContext.Port.Value; } if (cmdletContext.PubliclyAccessible != null) { request.PubliclyAccessible = cmdletContext.PubliclyAccessible.Value; } // populate RdsCustomClusterConfiguration var requestRdsCustomClusterConfigurationIsNull = true; request.RdsCustomClusterConfiguration = new Amazon.RDS.Model.RdsCustomClusterConfiguration(); System.String requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_InterconnectSubnetId = null; if (cmdletContext.RdsCustomClusterConfiguration_InterconnectSubnetId != null) { requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_InterconnectSubnetId = cmdletContext.RdsCustomClusterConfiguration_InterconnectSubnetId; } if (requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_InterconnectSubnetId != null) { request.RdsCustomClusterConfiguration.InterconnectSubnetId = requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_InterconnectSubnetId; requestRdsCustomClusterConfigurationIsNull = false; } Amazon.RDS.ReplicaMode requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_ReplicaMode = null; if (cmdletContext.RdsCustomClusterConfiguration_ReplicaMode != null) { requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_ReplicaMode = cmdletContext.RdsCustomClusterConfiguration_ReplicaMode; } if (requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_ReplicaMode != null) { request.RdsCustomClusterConfiguration.ReplicaMode = requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_ReplicaMode; requestRdsCustomClusterConfigurationIsNull = false; } System.String requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_TransitGatewayMulticastDomainId = null; if (cmdletContext.RdsCustomClusterConfiguration_TransitGatewayMulticastDomainId != null) { requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_TransitGatewayMulticastDomainId = cmdletContext.RdsCustomClusterConfiguration_TransitGatewayMulticastDomainId; } if (requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_TransitGatewayMulticastDomainId != null) { request.RdsCustomClusterConfiguration.TransitGatewayMulticastDomainId = requestRdsCustomClusterConfiguration_rdsCustomClusterConfiguration_TransitGatewayMulticastDomainId; requestRdsCustomClusterConfigurationIsNull = false; } // determine if request.RdsCustomClusterConfiguration should be set to null if (requestRdsCustomClusterConfigurationIsNull) { request.RdsCustomClusterConfiguration = null; } // populate ScalingConfiguration var requestScalingConfigurationIsNull = true; request.ScalingConfiguration = new Amazon.RDS.Model.ScalingConfiguration(); System.Boolean? requestScalingConfiguration_scalingConfiguration_AutoPause = null; if (cmdletContext.ScalingConfiguration_AutoPause != null) { requestScalingConfiguration_scalingConfiguration_AutoPause = cmdletContext.ScalingConfiguration_AutoPause.Value; } if (requestScalingConfiguration_scalingConfiguration_AutoPause != null) { request.ScalingConfiguration.AutoPause = requestScalingConfiguration_scalingConfiguration_AutoPause.Value; requestScalingConfigurationIsNull = false; } System.Int32? requestScalingConfiguration_scalingConfiguration_MaxCapacity = null; if (cmdletContext.ScalingConfiguration_MaxCapacity != null) { requestScalingConfiguration_scalingConfiguration_MaxCapacity = cmdletContext.ScalingConfiguration_MaxCapacity.Value; } if (requestScalingConfiguration_scalingConfiguration_MaxCapacity != null) { request.ScalingConfiguration.MaxCapacity = requestScalingConfiguration_scalingConfiguration_MaxCapacity.Value; requestScalingConfigurationIsNull = false; } System.Int32? requestScalingConfiguration_scalingConfiguration_MinCapacity = null; if (cmdletContext.ScalingConfiguration_MinCapacity != null) { requestScalingConfiguration_scalingConfiguration_MinCapacity = cmdletContext.ScalingConfiguration_MinCapacity.Value; } if (requestScalingConfiguration_scalingConfiguration_MinCapacity != null) { request.ScalingConfiguration.MinCapacity = requestScalingConfiguration_scalingConfiguration_MinCapacity.Value; requestScalingConfigurationIsNull = false; } System.Int32? requestScalingConfiguration_scalingConfiguration_SecondsBeforeTimeout = null; if (cmdletContext.ScalingConfiguration_SecondsBeforeTimeout != null) { requestScalingConfiguration_scalingConfiguration_SecondsBeforeTimeout = cmdletContext.ScalingConfiguration_SecondsBeforeTimeout.Value; } if (requestScalingConfiguration_scalingConfiguration_SecondsBeforeTimeout != null) { request.ScalingConfiguration.SecondsBeforeTimeout = requestScalingConfiguration_scalingConfiguration_SecondsBeforeTimeout.Value; requestScalingConfigurationIsNull = false; } System.Int32? requestScalingConfiguration_scalingConfiguration_SecondsUntilAutoPause = null; if (cmdletContext.ScalingConfiguration_SecondsUntilAutoPause != null) { requestScalingConfiguration_scalingConfiguration_SecondsUntilAutoPause = cmdletContext.ScalingConfiguration_SecondsUntilAutoPause.Value; } if (requestScalingConfiguration_scalingConfiguration_SecondsUntilAutoPause != null) { request.ScalingConfiguration.SecondsUntilAutoPause = requestScalingConfiguration_scalingConfiguration_SecondsUntilAutoPause.Value; requestScalingConfigurationIsNull = false; } System.String requestScalingConfiguration_scalingConfiguration_TimeoutAction = null; if (cmdletContext.ScalingConfiguration_TimeoutAction != null) { requestScalingConfiguration_scalingConfiguration_TimeoutAction = cmdletContext.ScalingConfiguration_TimeoutAction; } if (requestScalingConfiguration_scalingConfiguration_TimeoutAction != null) { request.ScalingConfiguration.TimeoutAction = requestScalingConfiguration_scalingConfiguration_TimeoutAction; requestScalingConfigurationIsNull = false; } // determine if request.ScalingConfiguration should be set to null if (requestScalingConfigurationIsNull) { request.ScalingConfiguration = null; } // populate ServerlessV2ScalingConfiguration var requestServerlessV2ScalingConfigurationIsNull = true; request.ServerlessV2ScalingConfiguration = new Amazon.RDS.Model.ServerlessV2ScalingConfiguration(); System.Double? requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MaxCapacity = null; if (cmdletContext.ServerlessV2ScalingConfiguration_MaxCapacity != null) { requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MaxCapacity = cmdletContext.ServerlessV2ScalingConfiguration_MaxCapacity.Value; } if (requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MaxCapacity != null) { request.ServerlessV2ScalingConfiguration.MaxCapacity = requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MaxCapacity.Value; requestServerlessV2ScalingConfigurationIsNull = false; } System.Double? requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MinCapacity = null; if (cmdletContext.ServerlessV2ScalingConfiguration_MinCapacity != null) { requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MinCapacity = cmdletContext.ServerlessV2ScalingConfiguration_MinCapacity.Value; } if (requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MinCapacity != null) { request.ServerlessV2ScalingConfiguration.MinCapacity = requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_MinCapacity.Value; requestServerlessV2ScalingConfigurationIsNull = false; } System.Int32? requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_SecondsUntilAutoPause = null; if (cmdletContext.ServerlessV2ScalingConfiguration_SecondsUntilAutoPause != null) { requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_SecondsUntilAutoPause = cmdletContext.ServerlessV2ScalingConfiguration_SecondsUntilAutoPause.Value; } if (requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_SecondsUntilAutoPause != null) { request.ServerlessV2ScalingConfiguration.SecondsUntilAutoPause = requestServerlessV2ScalingConfiguration_serverlessV2ScalingConfiguration_SecondsUntilAutoPause.Value; requestServerlessV2ScalingConfigurationIsNull = false; } // determine if request.ServerlessV2ScalingConfiguration should be set to null if (requestServerlessV2ScalingConfigurationIsNull) { request.ServerlessV2ScalingConfiguration = null; } if (cmdletContext.SnapshotIdentifier != null) { request.SnapshotIdentifier = cmdletContext.SnapshotIdentifier; } if (cmdletContext.StorageType != null) { request.StorageType = cmdletContext.StorageType; } if (cmdletContext.Tag != null) { request.Tags = cmdletContext.Tag; } if (cmdletContext.VpcSecurityGroupId != null) { request.VpcSecurityGroupIds = cmdletContext.VpcSecurityGroupId; } CmdletOutput output; // issue call var client = Client ?? CreateClient(_CurrentCredentials, _RegionEndpoint); try { var response = CallAWSServiceOperation(client, request); object pipelineOutput = null; pipelineOutput = cmdletContext.Select(response, this); output = new CmdletOutput { PipelineOutput = pipelineOutput, ServiceResponse = response }; } catch (Exception e) { output = new CmdletOutput { ErrorResponse = e }; } return output; } public ExecutorContext CreateContext() { return new CmdletContext(); } #endregion #region AWS Service Operation Call private Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse CallAWSServiceOperation(IAmazonRDS client, Amazon.RDS.Model.RestoreDBClusterFromSnapshotRequest request) { Utils.Common.WriteVerboseEndpointMessage(this, client.Config, "Amazon Relational Database Service", "RestoreDBClusterFromSnapshot"); try { #if DESKTOP return client.RestoreDBClusterFromSnapshot(request); #elif CORECLR return client.RestoreDBClusterFromSnapshotAsync(request).GetAwaiter().GetResult(); #else #error "Unknown build edition" #endif } catch (AmazonServiceException exc) { var webException = exc.InnerException as System.Net.WebException; if (webException != null) { throw new Exception(Utils.Common.FormatNameResolutionFailureMessage(client.Config, webException.Message), webException); } throw; } } #endregion internal partial class CmdletContext : ExecutorContext { public List<System.String> AvailabilityZone { get; set; } public System.Int64? BacktrackWindow { get; set; } public System.Boolean? CopyTagsToSnapshot { get; set; } public System.String DatabaseName { get; set; } public System.String DBClusterIdentifier { get; set; } public System.String DBClusterInstanceClass { get; set; } public System.String DBClusterParameterGroupName { get; set; } public System.String DBSubnetGroupName { get; set; } public System.Boolean? DeletionProtection { get; set; } public System.String Domain { get; set; } public System.String DomainIAMRoleName { get; set; } public List<System.String> EnableCloudwatchLogsExport { get; set; } public System.Boolean? EnableIAMDatabaseAuthentication { get; set; } public System.Boolean? EnablePerformanceInsight { get; set; } public System.String Engine { get; set; } public System.String EngineLifecycleSupport { get; set; } public System.String EngineMode { get; set; } public System.String EngineVersion { get; set; } public System.Int32? Iops { get; set; } public System.String KmsKeyId { get; set; } public System.Int32? MonitoringInterval { get; set; } public System.String MonitoringRoleArn { get; set; } public System.String NetworkType { get; set; } public System.String OptionGroupName { get; set; } public System.String PerformanceInsightsKMSKeyId { get; set; } public System.Int32? PerformanceInsightsRetentionPeriod { get; set; } public System.Int32? Port { get; set; } public System.Boolean? PubliclyAccessible { get; set; } public System.String RdsCustomClusterConfiguration_InterconnectSubnetId { get; set; } public Amazon.RDS.ReplicaMode RdsCustomClusterConfiguration_ReplicaMode { get; set; } public System.String RdsCustomClusterConfiguration_TransitGatewayMulticastDomainId { get; set; } public System.Boolean? ScalingConfiguration_AutoPause { get; set; } public System.Int32? ScalingConfiguration_MaxCapacity { get; set; } public System.Int32? ScalingConfiguration_MinCapacity { get; set; } public System.Int32? ScalingConfiguration_SecondsBeforeTimeout { get; set; } public System.Int32? ScalingConfiguration_SecondsUntilAutoPause { get; set; } public System.String ScalingConfiguration_TimeoutAction { get; set; } public System.Double? ServerlessV2ScalingConfiguration_MaxCapacity { get; set; } public System.Double? ServerlessV2ScalingConfiguration_MinCapacity { get; set; } public System.Int32? ServerlessV2ScalingConfiguration_SecondsUntilAutoPause { get; set; } public System.String SnapshotIdentifier { get; set; } public System.String StorageType { get; set; } public List<Amazon.RDS.Model.Tag> Tag { get; set; } public List<System.String> VpcSecurityGroupId { get; set; } public System.Func<Amazon.RDS.Model.RestoreDBClusterFromSnapshotResponse, RestoreRDSDBClusterFromSnapshotCmdlet, object> Select { get; set; } = (response, cmdlet) => response.DBCluster; } } }

modules/AWSPowerShell/Cmdlets/RDS/Basic/Restore-RDSDBClusterFromSnapshot-Cmdlet.cs (712 lines of code) (raw):