in src/uws_frame_encoder.c [14:190]
BUFFER_HANDLE uws_frame_encoder_encode(WS_FRAME_TYPE opcode, const unsigned char* payload, size_t length, bool is_masked, bool is_final, unsigned char reserved)
{
BUFFER_HANDLE result;
if (reserved > 7)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_052: [ If reserved has any bits set except the lowest 3 then uws_frame_encoder_encode shall fail and return NULL. ]*/
LogError("Bad reserved value: 0x%02x", reserved);
result = NULL;
}
else if (opcode > 0x0F)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_006: [ If an unknown opcode is received, the receiving endpoint MUST _Fail the WebSocket Connection_. ]*/
LogError("Invalid opcode: 0x%02x", opcode);
result = NULL;
}
else if ((length > 0) &&
(payload == NULL))
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_054: [ If length is greater than 0 and payload is NULL, then uws_frame_encoder_encode shall fail and return NULL. ]*/
LogError("Invalid arguments: NULL payload and length=%u", (unsigned int)length);
result = NULL;
}
else
{
size_t needed_bytes = 2;
size_t header_bytes;
/* Codes_SRS_UWS_FRAME_ENCODER_01_044: [ On success uws_frame_encoder_encode shall return a non-NULL handle to the result buffer. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_048: [ The newly created buffer shall be created by calling BUFFER_new. ]*/
result = BUFFER_new();
if (result == NULL)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_049: [ If BUFFER_new fails then uws_frame_encoder_encode shall fail and return NULL. ]*/
LogError("Cannot create new buffer");
}
else
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_001: [ uws_frame_encoder_encode shall encode the information given in opcode, payload, length, is_masked, is_final and reserved according to the RFC6455 into a new buffer.]*/
if (length > 65535)
{
needed_bytes += 8;
}
else if (length > 125)
{
needed_bytes += 2;
}
if (is_masked)
{
needed_bytes += 4;
}
header_bytes = needed_bytes;
needed_bytes += length;
/* Codes_SRS_UWS_FRAME_ENCODER_01_046: [ The result buffer shall be resized accordingly using BUFFER_enlarge. ]*/
if (BUFFER_enlarge(result, needed_bytes) != 0)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_047: [ If BUFFER_enlarge fails then uws_frame_encoder_encode shall fail and return NULL. ]*/
LogError("Cannot allocate memory for encoded frame");
BUFFER_delete(result);
result = NULL;
}
else
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_050: [ The allocated memory shall be accessed by calling BUFFER_u_char. ]*/
unsigned char* buffer = BUFFER_u_char(result);
if (buffer == NULL)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_051: [ If BUFFER_u_char fails then uws_frame_encoder_encode shall fail and return a NULL. ]*/
LogError("Cannot get encoded buffer pointer");
BUFFER_delete(result);
result = NULL;
}
else
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_007: [ * %x0 denotes a continuation frame ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_008: [ * %x1 denotes a text frame ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_009: [ * %x2 denotes a binary frame ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_010: [ * %x3-7 are reserved for further non-control frames ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_011: [ * %x8 denotes a connection close ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_012: [ * %x9 denotes a ping ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_013: [ * %xA denotes a pong ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_014: [ * %xB-F are reserved for further control frames ]*/
buffer[0] = (unsigned char)opcode;
/* Codes_SRS_UWS_FRAME_ENCODER_01_002: [ Indicates that this is the final fragment in a message. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_003: [ The first fragment MAY also be the final fragment. ]*/
if (is_final)
{
buffer[0] |= 0x80;
}
/* Codes_SRS_UWS_FRAME_ENCODER_01_004: [ MUST be 0 unless an extension is negotiated that defines meanings for non-zero values. ]*/
buffer[0] |= reserved << 4;
/* Codes_SRS_UWS_FRAME_ENCODER_01_022: [ Note that in all cases, the minimal number of bytes MUST be used to encode the length, for example, the length of a 124-byte-long string can't be encoded as the sequence 126, 0, 124. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_018: [ The length of the "Payload data", in bytes: ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_023: [ The payload length is the length of the "Extension data" + the length of the "Application data". ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_042: [ The payload length, indicated in the framing as frame-payload-length, does NOT include the length of the masking key. ]*/
if (length > 65535)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_020: [ If 127, the following 8 bytes interpreted as a 64-bit unsigned integer (the most significant bit MUST be 0) are the payload length. ]*/
buffer[1] = 127;
/* Codes_SRS_UWS_FRAME_ENCODER_01_021: [ Multibyte length quantities are expressed in network byte order. ]*/
buffer[2] = (unsigned char)((uint64_t)length >> 56) & 0xFF;
buffer[3] = (unsigned char)((uint64_t)length >> 48) & 0xFF;
buffer[4] = (unsigned char)((uint64_t)length >> 40) & 0xFF;
buffer[5] = (unsigned char)((uint64_t)length >> 32) & 0xFF;
buffer[6] = (unsigned char)((uint64_t)length >> 24) & 0xFF;
buffer[7] = (unsigned char)((uint64_t)length >> 16) & 0xFF;
buffer[8] = (unsigned char)((uint64_t)length >> 8) & 0xFF;
buffer[9] = (unsigned char)(length & 0xFF);
}
else if (length > 125)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_019: [ If 126, the following 2 bytes interpreted as a 16-bit unsigned integer are the payload length. ]*/
buffer[1] = 126;
/* Codes_SRS_UWS_FRAME_ENCODER_01_021: [ Multibyte length quantities are expressed in network byte order. ]*/
buffer[2] = (unsigned char)(length >> 8);
buffer[3] = (unsigned char)(length & 0xFF);
}
else
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_043: [ if 0-125, that is the payload length. ]*/
buffer[1] = (unsigned char)length;
}
if (is_masked)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_015: [ Defines whether the "Payload data" is masked. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_033: [ A masked frame MUST have the field frame-masked set to 1, as defined in Section 5.2. ]*/
buffer[1] |= 0x80;
/* Codes_SRS_UWS_FRAME_ENCODER_01_053: [ In order to obtain a 32 bit value for masking, RANDOM_generate shall be used 4 times (for each byte). ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_016: [ If set to 1, a masking key is present in masking-key, and this is used to unmask the "Payload data" as per Section 5.3. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_026: [ This field is present if the mask bit is set to 1 and is absent if the mask bit is set to 0. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_034: [ The masking key is contained completely within the frame, as defined in Section 5.2 as frame-masking-key. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_036: [ The masking key is a 32-bit value chosen at random by the client. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_037: [ When preparing a masked frame, the client MUST pick a fresh masking key from the set of allowed 32-bit values. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_038: [ The masking key needs to be unpredictable; thus, the masking key MUST be derived from a strong source of entropy, and the masking key for a given frame MUST NOT make it simple for a server/proxy to predict the masking key for a subsequent frame. ]*/
buffer[header_bytes - 4] = (unsigned char)RANDOM_generate();
buffer[header_bytes - 3] = (unsigned char)RANDOM_generate();
buffer[header_bytes - 2] = (unsigned char)RANDOM_generate();
buffer[header_bytes - 1] = (unsigned char)RANDOM_generate();
}
if (length > 0)
{
if (is_masked)
{
size_t i;
/* Codes_SRS_UWS_FRAME_ENCODER_01_035: [ It is used to mask the "Payload data" defined in the same section as frame-payload-data, which includes "Extension data" and "Application data". ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_039: [ To convert masked data into unmasked data, or vice versa, the following algorithm is applied. ]*/
/* Codes_SRS_UWS_FRAME_ENCODER_01_040: [ The same algorithm applies regardless of the direction of the translation, e.g., the same steps are applied to mask the data as to unmask the data. ]*/
for (i = 0; i < length; i++)
{
/* Codes_SRS_UWS_FRAME_ENCODER_01_041: [ Octet i of the transformed data ("transformed-octet-i") is the XOR of octet i of the original data ("original-octet-i") with octet at index i modulo 4 of the masking key ("masking-key-octet-j"): ]*/
buffer[header_bytes + i] = ((unsigned char*)payload)[i] ^ buffer[header_bytes - 4 + (i % 4)];
}
}
else
{
(void)memcpy(buffer + header_bytes, payload, length);
}
}
}
}
}
}
return result;
}