in fsl/qe/ucc_slow.c [119:341]
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
{
struct ucc_slow_private *uccs;
u32 i;
struct ucc_slow __iomem *us_regs;
u32 gumr;
struct qe_bd __iomem *bd;
u32 id;
u32 command;
int ret = 0;
if (!us_info)
return -EINVAL;
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
printk(KERN_ERR "%s: illegal UCC number\n", __func__);
return -EINVAL;
}
/*
* Set mrblr
* Check that 'max_rx_buf_length' is properly aligned (4), unless
* rfw is 1, meaning that QE accepts one byte at a time, unlike normal
* case when QE accepts 32 bits at a time.
*/
if ((!us_info->rfw) &&
(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
printk(KERN_ERR "max_rx_buf_length not aligned.\n");
return -EINVAL;
}
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
printk(KERN_ERR "%s: Cannot allocate private data\n",
__func__);
return -ENOMEM;
}
uccs->rx_base_offset = -1;
uccs->tx_base_offset = -1;
uccs->us_pram_offset = -1;
/* Fill slow UCC structure */
uccs->us_info = us_info;
/* Set the PHY base address */
uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
if (uccs->us_regs == NULL) {
printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
kfree(uccs);
return -ENOMEM;
}
us_regs = uccs->us_regs;
uccs->p_ucce = &us_regs->ucce;
uccs->p_uccm = &us_regs->uccm;
/* Get PRAM base */
uccs->us_pram_offset =
qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
if (uccs->us_pram_offset < 0) {
printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
ucc_slow_free(uccs);
return -ENOMEM;
}
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
uccs->us_pram_offset);
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
/* Set UCC to slow type */
ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
if (ret) {
printk(KERN_ERR "%s: cannot set UCC type", __func__);
ucc_slow_free(uccs);
return ret;
}
iowrite16be(us_info->max_rx_buf_length, &uccs->us_pram->mrblr);
INIT_LIST_HEAD(&uccs->confQ);
/* Allocate BDs. */
uccs->rx_base_offset =
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (uccs->rx_base_offset < 0) {
printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
us_info->rx_bd_ring_len);
ucc_slow_free(uccs);
return -ENOMEM;
}
uccs->tx_base_offset =
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (uccs->tx_base_offset < 0) {
printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
ucc_slow_free(uccs);
return -ENOMEM;
}
/* Init Tx bds */
bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
/* clear bd buffer */
iowrite32be(0, &bd->buf);
/* set bd status and length */
iowrite32be(0, (u32 __iomem *)bd);
bd++;
}
/* for last BD set Wrap bit */
iowrite32be(0, &bd->buf);
iowrite32be(T_W, (u32 __iomem *)bd);
/* Init Rx bds */
bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
/* set bd status and length */
iowrite32be(0, (u32 __iomem *)bd);
/* clear bd buffer */
iowrite32be(0, &bd->buf);
bd++;
}
/* for last BD set Wrap bit */
iowrite32be(R_W, (u32 __iomem *)bd);
iowrite32be(0, &bd->buf);
/* Set GUMR (For more details see the hardware spec.). */
/* gumr_h */
gumr = us_info->tcrc;
if (us_info->cdp)
gumr |= UCC_SLOW_GUMR_H_CDP;
if (us_info->ctsp)
gumr |= UCC_SLOW_GUMR_H_CTSP;
if (us_info->cds)
gumr |= UCC_SLOW_GUMR_H_CDS;
if (us_info->ctss)
gumr |= UCC_SLOW_GUMR_H_CTSS;
if (us_info->tfl)
gumr |= UCC_SLOW_GUMR_H_TFL;
if (us_info->rfw)
gumr |= UCC_SLOW_GUMR_H_RFW;
if (us_info->txsy)
gumr |= UCC_SLOW_GUMR_H_TXSY;
if (us_info->rtsm)
gumr |= UCC_SLOW_GUMR_H_RTSM;
iowrite32be(gumr, &us_regs->gumr_h);
/* gumr_l */
gumr = (u32)us_info->tdcr | (u32)us_info->rdcr | (u32)us_info->tenc |
(u32)us_info->renc | (u32)us_info->diag | (u32)us_info->mode;
if (us_info->tci)
gumr |= UCC_SLOW_GUMR_L_TCI;
if (us_info->rinv)
gumr |= UCC_SLOW_GUMR_L_RINV;
if (us_info->tinv)
gumr |= UCC_SLOW_GUMR_L_TINV;
if (us_info->tend)
gumr |= UCC_SLOW_GUMR_L_TEND;
iowrite32be(gumr, &us_regs->gumr_l);
/* Function code registers */
/* if the data is in cachable memory, the 'global' */
/* in the function code should be set. */
iowrite8(UCC_BMR_BO_BE, &uccs->us_pram->tbmr);
iowrite8(UCC_BMR_BO_BE, &uccs->us_pram->rbmr);
/* rbase, tbase are offsets from MURAM base */
iowrite16be(uccs->rx_base_offset, &uccs->us_pram->rbase);
iowrite16be(uccs->tx_base_offset, &uccs->us_pram->tbase);
/* Mux clocking */
/* Grant Support */
ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
/* Breakpoint Support */
ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
/* Set Tsa or NMSI mode. */
ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
/* If NMSI (not Tsa), set Tx and Rx clock. */
if (!us_info->tsa) {
/* Rx clock routing */
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
__func__);
ucc_slow_free(uccs);
return -EINVAL;
}
/* Tx clock routing */
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
__func__);
ucc_slow_free(uccs);
return -EINVAL;
}
}
/* Set interrupt mask register at UCC level. */
iowrite16be(us_info->uccm_mask, &us_regs->uccm);
/* First, clear anything pending at UCC level,
* otherwise, old garbage may come through
* as soon as the dam is opened. */
/* Writing '1' clears */
iowrite16be(0xffff, &us_regs->ucce);
/* Issue QE Init command */
if (us_info->init_tx && us_info->init_rx)
command = QE_INIT_TX_RX;
else if (us_info->init_tx)
command = QE_INIT_TX;
else
command = QE_INIT_RX; /* We know at least one is TRUE */
qe_issue_cmd(command, id, us_info->protocol, 0);
*uccs_ret = uccs;
return 0;
}