int s_client_main()

in lib/openssl/apps/s_client.c [882:3170]


int s_client_main(int argc, char **argv)
{
    BIO *sbio;
    EVP_PKEY *key = NULL;
    SSL *con = NULL;
    SSL_CTX *ctx = NULL;
    STACK_OF(X509) *chain = NULL;
    X509 *cert = NULL;
    X509_VERIFY_PARAM *vpm = NULL;
    SSL_EXCERT *exc = NULL;
    SSL_CONF_CTX *cctx = NULL;
    STACK_OF(OPENSSL_STRING) *ssl_args = NULL;
    char *dane_tlsa_domain = NULL;
    STACK_OF(OPENSSL_STRING) *dane_tlsa_rrset = NULL;
    int dane_ee_no_name = 0;
    STACK_OF(X509_CRL) *crls = NULL;
    const SSL_METHOD *meth = TLS_client_method();
    const char *CApath = NULL, *CAfile = NULL;
    char *cbuf = NULL, *sbuf = NULL;
    char *mbuf = NULL, *proxystr = NULL, *connectstr = NULL, *bindstr = NULL;
    char *cert_file = NULL, *key_file = NULL, *chain_file = NULL;
    char *chCApath = NULL, *chCAfile = NULL, *host = NULL;
    char *port = OPENSSL_strdup(PORT);
    char *bindhost = NULL, *bindport = NULL;
    char *passarg = NULL, *pass = NULL, *vfyCApath = NULL, *vfyCAfile = NULL;
    char *ReqCAfile = NULL;
    char *sess_in = NULL, *crl_file = NULL, *p;
    const char *protohost = NULL;
    struct timeval timeout, *timeoutp;
    fd_set readfds, writefds;
    int noCApath = 0, noCAfile = 0;
    int build_chain = 0, cbuf_len, cbuf_off, cert_format = FORMAT_PEM;
    int key_format = FORMAT_PEM, crlf = 0, full_log = 1, mbuf_len = 0;
    int prexit = 0;
    int sdebug = 0;
    int reconnect = 0, verify = SSL_VERIFY_NONE, vpmtouched = 0;
    int ret = 1, in_init = 1, i, nbio_test = 0, s = -1, k, width, state = 0;
    int sbuf_len, sbuf_off, cmdletters = 1;
    int socket_family = AF_UNSPEC, socket_type = SOCK_STREAM, protocol = 0;
    int starttls_proto = PROTO_OFF, crl_format = FORMAT_PEM, crl_download = 0;
    int write_tty, read_tty, write_ssl, read_ssl, tty_on, ssl_pending;
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
    int at_eof = 0;
#endif
    int read_buf_len = 0;
    int fallback_scsv = 0;
    OPTION_CHOICE o;
#ifndef OPENSSL_NO_DTLS
    int enable_timeouts = 0;
    long socket_mtu = 0;
#endif
#ifndef OPENSSL_NO_ENGINE
    ENGINE *ssl_client_engine = NULL;
#endif
    ENGINE *e = NULL;
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
    struct timeval tv;
#endif
    const char *servername = NULL;
    int noservername = 0;
    const char *alpn_in = NULL;
    tlsextctx tlsextcbp = { NULL, 0 };
    const char *ssl_config = NULL;
#define MAX_SI_TYPES 100
    unsigned short serverinfo_types[MAX_SI_TYPES];
    int serverinfo_count = 0, start = 0, len;
#ifndef OPENSSL_NO_NEXTPROTONEG
    const char *next_proto_neg_in = NULL;
#endif
#ifndef OPENSSL_NO_SRP
    char *srppass = NULL;
    int srp_lateuser = 0;
    SRP_ARG srp_arg = { NULL, NULL, 0, 0, 0, 1024 };
#endif
#ifndef OPENSSL_NO_SRTP
    char *srtp_profiles = NULL;
#endif
#ifndef OPENSSL_NO_CT
    char *ctlog_file = NULL;
    int ct_validation = 0;
#endif
    int min_version = 0, max_version = 0, prot_opt = 0, no_prot_opt = 0;
    int async = 0;
    unsigned int max_send_fragment = 0;
    unsigned int split_send_fragment = 0, max_pipelines = 0;
    enum { use_inet, use_unix, use_unknown } connect_type = use_unknown;
    int count4or6 = 0;
    uint8_t maxfraglen = 0;
    int c_nbio = 0, c_msg = 0, c_ign_eof = 0, c_brief = 0;
    int c_tlsextdebug = 0;
#ifndef OPENSSL_NO_OCSP
    int c_status_req = 0;
#endif
    BIO *bio_c_msg = NULL;
    const char *keylog_file = NULL, *early_data_file = NULL;
#ifndef OPENSSL_NO_DTLS
    int isdtls = 0;
#endif
    char *psksessf = NULL;
    int enable_pha = 0;
#ifndef OPENSSL_NO_SCTP
    int sctp_label_bug = 0;
#endif

    FD_ZERO(&readfds);
    FD_ZERO(&writefds);
/* Known false-positive of MemorySanitizer. */
#if defined(__has_feature)
# if __has_feature(memory_sanitizer)
    __msan_unpoison(&readfds, sizeof(readfds));
    __msan_unpoison(&writefds, sizeof(writefds));
# endif
#endif

    prog = opt_progname(argv[0]);
    c_quiet = 0;
    c_debug = 0;
    c_showcerts = 0;
    c_nbio = 0;
    vpm = X509_VERIFY_PARAM_new();
    cctx = SSL_CONF_CTX_new();

    if (vpm == NULL || cctx == NULL) {
        BIO_printf(bio_err, "%s: out of memory\n", prog);
        goto end;
    }

    cbuf = app_malloc(BUFSIZZ, "cbuf");
    sbuf = app_malloc(BUFSIZZ, "sbuf");
    mbuf = app_malloc(BUFSIZZ, "mbuf");

    SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_CLIENT | SSL_CONF_FLAG_CMDLINE);

    prog = opt_init(argc, argv, s_client_options);
    while ((o = opt_next()) != OPT_EOF) {
        /* Check for intermixing flags. */
        if (connect_type == use_unix && IS_INET_FLAG(o)) {
            BIO_printf(bio_err,
                       "%s: Intermixed protocol flags (unix and internet domains)\n",
                       prog);
            goto end;
        }
        if (connect_type == use_inet && IS_UNIX_FLAG(o)) {
            BIO_printf(bio_err,
                       "%s: Intermixed protocol flags (internet and unix domains)\n",
                       prog);
            goto end;
        }

        if (IS_PROT_FLAG(o) && ++prot_opt > 1) {
            BIO_printf(bio_err, "Cannot supply multiple protocol flags\n");
            goto end;
        }
        if (IS_NO_PROT_FLAG(o))
            no_prot_opt++;
        if (prot_opt == 1 && no_prot_opt) {
            BIO_printf(bio_err,
                       "Cannot supply both a protocol flag and '-no_<prot>'\n");
            goto end;
        }

        switch (o) {
        case OPT_EOF:
        case OPT_ERR:
 opthelp:
            BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
            goto end;
        case OPT_HELP:
            opt_help(s_client_options);
            ret = 0;
            goto end;
        case OPT_4:
            connect_type = use_inet;
            socket_family = AF_INET;
            count4or6++;
            break;
#ifdef AF_INET6
        case OPT_6:
            connect_type = use_inet;
            socket_family = AF_INET6;
            count4or6++;
            break;
#endif
        case OPT_HOST:
            connect_type = use_inet;
            freeandcopy(&host, opt_arg());
            break;
        case OPT_PORT:
            connect_type = use_inet;
            freeandcopy(&port, opt_arg());
            break;
        case OPT_CONNECT:
            connect_type = use_inet;
            freeandcopy(&connectstr, opt_arg());
            break;
        case OPT_BIND:
            freeandcopy(&bindstr, opt_arg());
            break;
        case OPT_PROXY:
            proxystr = opt_arg();
            starttls_proto = PROTO_CONNECT;
            break;
#ifdef AF_UNIX
        case OPT_UNIX:
            connect_type = use_unix;
            socket_family = AF_UNIX;
            freeandcopy(&host, opt_arg());
            break;
#endif
        case OPT_XMPPHOST:
            /* fall through, since this is an alias */
        case OPT_PROTOHOST:
            protohost = opt_arg();
            break;
        case OPT_VERIFY:
            verify = SSL_VERIFY_PEER;
            verify_args.depth = atoi(opt_arg());
            if (!c_quiet)
                BIO_printf(bio_err, "verify depth is %d\n", verify_args.depth);
            break;
        case OPT_CERT:
            cert_file = opt_arg();
            break;
        case OPT_NAMEOPT:
            if (!set_nameopt(opt_arg()))
                goto end;
            break;
        case OPT_CRL:
            crl_file = opt_arg();
            break;
        case OPT_CRL_DOWNLOAD:
            crl_download = 1;
            break;
        case OPT_SESS_OUT:
            sess_out = opt_arg();
            break;
        case OPT_SESS_IN:
            sess_in = opt_arg();
            break;
        case OPT_CERTFORM:
            if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &cert_format))
                goto opthelp;
            break;
        case OPT_CRLFORM:
            if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &crl_format))
                goto opthelp;
            break;
        case OPT_VERIFY_RET_ERROR:
            verify = SSL_VERIFY_PEER;
            verify_args.return_error = 1;
            break;
        case OPT_VERIFY_QUIET:
            verify_args.quiet = 1;
            break;
        case OPT_BRIEF:
            c_brief = verify_args.quiet = c_quiet = 1;
            break;
        case OPT_S_CASES:
            if (ssl_args == NULL)
                ssl_args = sk_OPENSSL_STRING_new_null();
            if (ssl_args == NULL
                || !sk_OPENSSL_STRING_push(ssl_args, opt_flag())
                || !sk_OPENSSL_STRING_push(ssl_args, opt_arg())) {
                BIO_printf(bio_err, "%s: Memory allocation failure\n", prog);
                goto end;
            }
            break;
        case OPT_V_CASES:
            if (!opt_verify(o, vpm))
                goto end;
            vpmtouched++;
            break;
        case OPT_X_CASES:
            if (!args_excert(o, &exc))
                goto end;
            break;
        case OPT_PREXIT:
            prexit = 1;
            break;
        case OPT_CRLF:
            crlf = 1;
            break;
        case OPT_QUIET:
            c_quiet = c_ign_eof = 1;
            break;
        case OPT_NBIO:
            c_nbio = 1;
            break;
        case OPT_NOCMDS:
            cmdletters = 0;
            break;
        case OPT_ENGINE:
            e = setup_engine(opt_arg(), 1);
            break;
        case OPT_SSL_CLIENT_ENGINE:
#ifndef OPENSSL_NO_ENGINE
            ssl_client_engine = ENGINE_by_id(opt_arg());
            if (ssl_client_engine == NULL) {
                BIO_printf(bio_err, "Error getting client auth engine\n");
                goto opthelp;
            }
#endif
            break;
        case OPT_R_CASES:
            if (!opt_rand(o))
                goto end;
            break;
        case OPT_IGN_EOF:
            c_ign_eof = 1;
            break;
        case OPT_NO_IGN_EOF:
            c_ign_eof = 0;
            break;
        case OPT_DEBUG:
            c_debug = 1;
            break;
        case OPT_TLSEXTDEBUG:
            c_tlsextdebug = 1;
            break;
        case OPT_STATUS:
#ifndef OPENSSL_NO_OCSP
            c_status_req = 1;
#endif
            break;
        case OPT_WDEBUG:
#ifdef WATT32
            dbug_init();
#endif
            break;
        case OPT_MSG:
            c_msg = 1;
            break;
        case OPT_MSGFILE:
            bio_c_msg = BIO_new_file(opt_arg(), "w");
            break;
        case OPT_TRACE:
#ifndef OPENSSL_NO_SSL_TRACE
            c_msg = 2;
#endif
            break;
        case OPT_SECURITY_DEBUG:
            sdebug = 1;
            break;
        case OPT_SECURITY_DEBUG_VERBOSE:
            sdebug = 2;
            break;
        case OPT_SHOWCERTS:
            c_showcerts = 1;
            break;
        case OPT_NBIO_TEST:
            nbio_test = 1;
            break;
        case OPT_STATE:
            state = 1;
            break;
        case OPT_PSK_IDENTITY:
            psk_identity = opt_arg();
            break;
        case OPT_PSK:
            for (p = psk_key = opt_arg(); *p; p++) {
                if (isxdigit(_UC(*p)))
                    continue;
                BIO_printf(bio_err, "Not a hex number '%s'\n", psk_key);
                goto end;
            }
            break;
        case OPT_PSK_SESS:
            psksessf = opt_arg();
            break;
#ifndef OPENSSL_NO_SRP
        case OPT_SRPUSER:
            srp_arg.srplogin = opt_arg();
            if (min_version < TLS1_VERSION)
                min_version = TLS1_VERSION;
            break;
        case OPT_SRPPASS:
            srppass = opt_arg();
            if (min_version < TLS1_VERSION)
                min_version = TLS1_VERSION;
            break;
        case OPT_SRP_STRENGTH:
            srp_arg.strength = atoi(opt_arg());
            BIO_printf(bio_err, "SRP minimal length for N is %d\n",
                       srp_arg.strength);
            if (min_version < TLS1_VERSION)
                min_version = TLS1_VERSION;
            break;
        case OPT_SRP_LATEUSER:
            srp_lateuser = 1;
            if (min_version < TLS1_VERSION)
                min_version = TLS1_VERSION;
            break;
        case OPT_SRP_MOREGROUPS:
            srp_arg.amp = 1;
            if (min_version < TLS1_VERSION)
                min_version = TLS1_VERSION;
            break;
#endif
        case OPT_SSL_CONFIG:
            ssl_config = opt_arg();
            break;
        case OPT_SSL3:
            min_version = SSL3_VERSION;
            max_version = SSL3_VERSION;
            socket_type = SOCK_STREAM;
#ifndef OPENSSL_NO_DTLS
            isdtls = 0;
#endif
            break;
        case OPT_TLS1_3:
            min_version = TLS1_3_VERSION;
            max_version = TLS1_3_VERSION;
            socket_type = SOCK_STREAM;
#ifndef OPENSSL_NO_DTLS
            isdtls = 0;
#endif
            break;
        case OPT_TLS1_2:
            min_version = TLS1_2_VERSION;
            max_version = TLS1_2_VERSION;
            socket_type = SOCK_STREAM;
#ifndef OPENSSL_NO_DTLS
            isdtls = 0;
#endif
            break;
        case OPT_TLS1_1:
            min_version = TLS1_1_VERSION;
            max_version = TLS1_1_VERSION;
            socket_type = SOCK_STREAM;
#ifndef OPENSSL_NO_DTLS
            isdtls = 0;
#endif
            break;
        case OPT_TLS1:
            min_version = TLS1_VERSION;
            max_version = TLS1_VERSION;
            socket_type = SOCK_STREAM;
#ifndef OPENSSL_NO_DTLS
            isdtls = 0;
#endif
            break;
        case OPT_DTLS:
#ifndef OPENSSL_NO_DTLS
            meth = DTLS_client_method();
            socket_type = SOCK_DGRAM;
            isdtls = 1;
#endif
            break;
        case OPT_DTLS1:
#ifndef OPENSSL_NO_DTLS1
            meth = DTLS_client_method();
            min_version = DTLS1_VERSION;
            max_version = DTLS1_VERSION;
            socket_type = SOCK_DGRAM;
            isdtls = 1;
#endif
            break;
        case OPT_DTLS1_2:
#ifndef OPENSSL_NO_DTLS1_2
            meth = DTLS_client_method();
            min_version = DTLS1_2_VERSION;
            max_version = DTLS1_2_VERSION;
            socket_type = SOCK_DGRAM;
            isdtls = 1;
#endif
            break;
        case OPT_SCTP:
#ifndef OPENSSL_NO_SCTP
            protocol = IPPROTO_SCTP;
#endif
            break;
        case OPT_SCTP_LABEL_BUG:
#ifndef OPENSSL_NO_SCTP
            sctp_label_bug = 1;
#endif
            break;
        case OPT_TIMEOUT:
#ifndef OPENSSL_NO_DTLS
            enable_timeouts = 1;
#endif
            break;
        case OPT_MTU:
#ifndef OPENSSL_NO_DTLS
            socket_mtu = atol(opt_arg());
#endif
            break;
        case OPT_FALLBACKSCSV:
            fallback_scsv = 1;
            break;
        case OPT_KEYFORM:
            if (!opt_format(opt_arg(), OPT_FMT_PDE, &key_format))
                goto opthelp;
            break;
        case OPT_PASS:
            passarg = opt_arg();
            break;
        case OPT_CERT_CHAIN:
            chain_file = opt_arg();
            break;
        case OPT_KEY:
            key_file = opt_arg();
            break;
        case OPT_RECONNECT:
            reconnect = 5;
            break;
        case OPT_CAPATH:
            CApath = opt_arg();
            break;
        case OPT_NOCAPATH:
            noCApath = 1;
            break;
        case OPT_CHAINCAPATH:
            chCApath = opt_arg();
            break;
        case OPT_VERIFYCAPATH:
            vfyCApath = opt_arg();
            break;
        case OPT_BUILD_CHAIN:
            build_chain = 1;
            break;
        case OPT_REQCAFILE:
            ReqCAfile = opt_arg();
            break;
        case OPT_CAFILE:
            CAfile = opt_arg();
            break;
        case OPT_NOCAFILE:
            noCAfile = 1;
            break;
#ifndef OPENSSL_NO_CT
        case OPT_NOCT:
            ct_validation = 0;
            break;
        case OPT_CT:
            ct_validation = 1;
            break;
        case OPT_CTLOG_FILE:
            ctlog_file = opt_arg();
            break;
#endif
        case OPT_CHAINCAFILE:
            chCAfile = opt_arg();
            break;
        case OPT_VERIFYCAFILE:
            vfyCAfile = opt_arg();
            break;
        case OPT_DANE_TLSA_DOMAIN:
            dane_tlsa_domain = opt_arg();
            break;
        case OPT_DANE_TLSA_RRDATA:
            if (dane_tlsa_rrset == NULL)
                dane_tlsa_rrset = sk_OPENSSL_STRING_new_null();
            if (dane_tlsa_rrset == NULL ||
                !sk_OPENSSL_STRING_push(dane_tlsa_rrset, opt_arg())) {
                BIO_printf(bio_err, "%s: Memory allocation failure\n", prog);
                goto end;
            }
            break;
        case OPT_DANE_EE_NO_NAME:
            dane_ee_no_name = 1;
            break;
        case OPT_NEXTPROTONEG:
#ifndef OPENSSL_NO_NEXTPROTONEG
            next_proto_neg_in = opt_arg();
#endif
            break;
        case OPT_ALPN:
            alpn_in = opt_arg();
            break;
        case OPT_SERVERINFO:
            p = opt_arg();
            len = strlen(p);
            for (start = 0, i = 0; i <= len; ++i) {
                if (i == len || p[i] == ',') {
                    serverinfo_types[serverinfo_count] = atoi(p + start);
                    if (++serverinfo_count == MAX_SI_TYPES)
                        break;
                    start = i + 1;
                }
            }
            break;
        case OPT_STARTTLS:
            if (!opt_pair(opt_arg(), services, &starttls_proto))
                goto end;
            break;
        case OPT_SERVERNAME:
            servername = opt_arg();
            break;
        case OPT_NOSERVERNAME:
            noservername = 1;
            break;
        case OPT_USE_SRTP:
#ifndef OPENSSL_NO_SRTP
            srtp_profiles = opt_arg();
#endif
            break;
        case OPT_KEYMATEXPORT:
            keymatexportlabel = opt_arg();
            break;
        case OPT_KEYMATEXPORTLEN:
            keymatexportlen = atoi(opt_arg());
            break;
        case OPT_ASYNC:
            async = 1;
            break;
        case OPT_MAXFRAGLEN:
            len = atoi(opt_arg());
            switch (len) {
            case 512:
                maxfraglen = TLSEXT_max_fragment_length_512;
                break;
            case 1024:
                maxfraglen = TLSEXT_max_fragment_length_1024;
                break;
            case 2048:
                maxfraglen = TLSEXT_max_fragment_length_2048;
                break;
            case 4096:
                maxfraglen = TLSEXT_max_fragment_length_4096;
                break;
            default:
                BIO_printf(bio_err,
                           "%s: Max Fragment Len %u is out of permitted values",
                           prog, len);
                goto opthelp;
            }
            break;
        case OPT_MAX_SEND_FRAG:
            max_send_fragment = atoi(opt_arg());
            break;
        case OPT_SPLIT_SEND_FRAG:
            split_send_fragment = atoi(opt_arg());
            break;
        case OPT_MAX_PIPELINES:
            max_pipelines = atoi(opt_arg());
            break;
        case OPT_READ_BUF:
            read_buf_len = atoi(opt_arg());
            break;
        case OPT_KEYLOG_FILE:
            keylog_file = opt_arg();
            break;
        case OPT_EARLY_DATA:
            early_data_file = opt_arg();
            break;
        case OPT_ENABLE_PHA:
            enable_pha = 1;
            break;
        }
    }
    if (count4or6 >= 2) {
        BIO_printf(bio_err, "%s: Can't use both -4 and -6\n", prog);
        goto opthelp;
    }
    if (noservername) {
        if (servername != NULL) {
            BIO_printf(bio_err,
                       "%s: Can't use -servername and -noservername together\n",
                       prog);
            goto opthelp;
        }
        if (dane_tlsa_domain != NULL) {
            BIO_printf(bio_err,
               "%s: Can't use -dane_tlsa_domain and -noservername together\n",
               prog);
            goto opthelp;
        }
    }
    argc = opt_num_rest();
    if (argc == 1) {
        /* If there's a positional argument, it's the equivalent of
         * OPT_CONNECT.
         * Don't allow -connect and a separate argument.
         */
        if (connectstr != NULL) {
            BIO_printf(bio_err,
                       "%s: must not provide both -connect option and target parameter\n",
                       prog);
            goto opthelp;
        }
        connect_type = use_inet;
        freeandcopy(&connectstr, *opt_rest());
    } else if (argc != 0) {
        goto opthelp;
    }

#ifndef OPENSSL_NO_NEXTPROTONEG
    if (min_version == TLS1_3_VERSION && next_proto_neg_in != NULL) {
        BIO_printf(bio_err, "Cannot supply -nextprotoneg with TLSv1.3\n");
        goto opthelp;
    }
#endif
    if (proxystr != NULL) {
        int res;
        char *tmp_host = host, *tmp_port = port;
        if (connectstr == NULL) {
            BIO_printf(bio_err, "%s: -proxy requires use of -connect or target parameter\n", prog);
            goto opthelp;
        }
        res = BIO_parse_hostserv(proxystr, &host, &port, BIO_PARSE_PRIO_HOST);
        if (tmp_host != host)
            OPENSSL_free(tmp_host);
        if (tmp_port != port)
            OPENSSL_free(tmp_port);
        if (!res) {
            BIO_printf(bio_err,
                       "%s: -proxy argument malformed or ambiguous\n", prog);
            goto end;
        }
    } else {
        int res = 1;
        char *tmp_host = host, *tmp_port = port;
        if (connectstr != NULL)
            res = BIO_parse_hostserv(connectstr, &host, &port,
                                     BIO_PARSE_PRIO_HOST);
        if (tmp_host != host)
            OPENSSL_free(tmp_host);
        if (tmp_port != port)
            OPENSSL_free(tmp_port);
        if (!res) {
            BIO_printf(bio_err,
                       "%s: -connect argument or target parameter malformed or ambiguous\n",
                       prog);
            goto end;
        }
    }

    if (bindstr != NULL) {
        int res;
        res = BIO_parse_hostserv(bindstr, &bindhost, &bindport,
                                 BIO_PARSE_PRIO_HOST);
        if (!res) {
            BIO_printf(bio_err,
                       "%s: -bind argument parameter malformed or ambiguous\n",
                       prog);
            goto end;
        }
    }

#ifdef AF_UNIX
    if (socket_family == AF_UNIX && socket_type != SOCK_STREAM) {
        BIO_printf(bio_err,
                   "Can't use unix sockets and datagrams together\n");
        goto end;
    }
#endif

#ifndef OPENSSL_NO_SCTP
    if (protocol == IPPROTO_SCTP) {
        if (socket_type != SOCK_DGRAM) {
            BIO_printf(bio_err, "Can't use -sctp without DTLS\n");
            goto end;
        }
        /* SCTP is unusual. It uses DTLS over a SOCK_STREAM protocol */
        socket_type = SOCK_STREAM;
    }
#endif

#if !defined(OPENSSL_NO_NEXTPROTONEG)
    next_proto.status = -1;
    if (next_proto_neg_in) {
        next_proto.data =
            next_protos_parse(&next_proto.len, next_proto_neg_in);
        if (next_proto.data == NULL) {
            BIO_printf(bio_err, "Error parsing -nextprotoneg argument\n");
            goto end;
        }
    } else
        next_proto.data = NULL;
#endif

    if (!app_passwd(passarg, NULL, &pass, NULL)) {
        BIO_printf(bio_err, "Error getting password\n");
        goto end;
    }

    if (key_file == NULL)
        key_file = cert_file;

    if (key_file != NULL) {
        key = load_key(key_file, key_format, 0, pass, e,
                       "client certificate private key file");
        if (key == NULL) {
            ERR_print_errors(bio_err);
            goto end;
        }
    }

    if (cert_file != NULL) {
        cert = load_cert(cert_file, cert_format, "client certificate file");
        if (cert == NULL) {
            ERR_print_errors(bio_err);
            goto end;
        }
    }

    if (chain_file != NULL) {
        if (!load_certs(chain_file, &chain, FORMAT_PEM, NULL,
                        "client certificate chain"))
            goto end;
    }

    if (crl_file != NULL) {
        X509_CRL *crl;
        crl = load_crl(crl_file, crl_format);
        if (crl == NULL) {
            BIO_puts(bio_err, "Error loading CRL\n");
            ERR_print_errors(bio_err);
            goto end;
        }
        crls = sk_X509_CRL_new_null();
        if (crls == NULL || !sk_X509_CRL_push(crls, crl)) {
            BIO_puts(bio_err, "Error adding CRL\n");
            ERR_print_errors(bio_err);
            X509_CRL_free(crl);
            goto end;
        }
    }

    if (!load_excert(&exc))
        goto end;

    if (bio_c_out == NULL) {
        if (c_quiet && !c_debug) {
            bio_c_out = BIO_new(BIO_s_null());
            if (c_msg && bio_c_msg == NULL)
                bio_c_msg = dup_bio_out(FORMAT_TEXT);
        } else if (bio_c_out == NULL)
            bio_c_out = dup_bio_out(FORMAT_TEXT);
    }
#ifndef OPENSSL_NO_SRP
    if (!app_passwd(srppass, NULL, &srp_arg.srppassin, NULL)) {
        BIO_printf(bio_err, "Error getting password\n");
        goto end;
    }
#endif

    ctx = SSL_CTX_new(meth);
    if (ctx == NULL) {
        ERR_print_errors(bio_err);
        goto end;
    }

    SSL_CTX_clear_mode(ctx, SSL_MODE_AUTO_RETRY);

    if (sdebug)
        ssl_ctx_security_debug(ctx, sdebug);

    if (!config_ctx(cctx, ssl_args, ctx))
        goto end;

    if (ssl_config != NULL) {
        if (SSL_CTX_config(ctx, ssl_config) == 0) {
            BIO_printf(bio_err, "Error using configuration \"%s\"\n",
                       ssl_config);
            ERR_print_errors(bio_err);
            goto end;
        }
    }

#ifndef OPENSSL_NO_SCTP
    if (protocol == IPPROTO_SCTP && sctp_label_bug == 1)
        SSL_CTX_set_mode(ctx, SSL_MODE_DTLS_SCTP_LABEL_LENGTH_BUG);
#endif

    if (min_version != 0
        && SSL_CTX_set_min_proto_version(ctx, min_version) == 0)
        goto end;
    if (max_version != 0
        && SSL_CTX_set_max_proto_version(ctx, max_version) == 0)
        goto end;

    if (vpmtouched && !SSL_CTX_set1_param(ctx, vpm)) {
        BIO_printf(bio_err, "Error setting verify params\n");
        ERR_print_errors(bio_err);
        goto end;
    }

    if (async) {
        SSL_CTX_set_mode(ctx, SSL_MODE_ASYNC);
    }

    if (max_send_fragment > 0
        && !SSL_CTX_set_max_send_fragment(ctx, max_send_fragment)) {
        BIO_printf(bio_err, "%s: Max send fragment size %u is out of permitted range\n",
                   prog, max_send_fragment);
        goto end;
    }

    if (split_send_fragment > 0
        && !SSL_CTX_set_split_send_fragment(ctx, split_send_fragment)) {
        BIO_printf(bio_err, "%s: Split send fragment size %u is out of permitted range\n",
                   prog, split_send_fragment);
        goto end;
    }

    if (max_pipelines > 0
        && !SSL_CTX_set_max_pipelines(ctx, max_pipelines)) {
        BIO_printf(bio_err, "%s: Max pipelines %u is out of permitted range\n",
                   prog, max_pipelines);
        goto end;
    }

    if (read_buf_len > 0) {
        SSL_CTX_set_default_read_buffer_len(ctx, read_buf_len);
    }

    if (maxfraglen > 0
            && !SSL_CTX_set_tlsext_max_fragment_length(ctx, maxfraglen)) {
        BIO_printf(bio_err,
                   "%s: Max Fragment Length code %u is out of permitted values"
                   "\n", prog, maxfraglen);
        goto end;
    }

    if (!ssl_load_stores(ctx, vfyCApath, vfyCAfile, chCApath, chCAfile,
                         crls, crl_download)) {
        BIO_printf(bio_err, "Error loading store locations\n");
        ERR_print_errors(bio_err);
        goto end;
    }
    if (ReqCAfile != NULL) {
        STACK_OF(X509_NAME) *nm = sk_X509_NAME_new_null();

        if (nm == NULL || !SSL_add_file_cert_subjects_to_stack(nm, ReqCAfile)) {
            sk_X509_NAME_pop_free(nm, X509_NAME_free);
            BIO_printf(bio_err, "Error loading CA names\n");
            ERR_print_errors(bio_err);
            goto end;
        }
        SSL_CTX_set0_CA_list(ctx, nm);
    }
#ifndef OPENSSL_NO_ENGINE
    if (ssl_client_engine) {
        if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine)) {
            BIO_puts(bio_err, "Error setting client auth engine\n");
            ERR_print_errors(bio_err);
            ENGINE_free(ssl_client_engine);
            goto end;
        }
        ENGINE_free(ssl_client_engine);
    }
#endif

#ifndef OPENSSL_NO_PSK
    if (psk_key != NULL) {
        if (c_debug)
            BIO_printf(bio_c_out, "PSK key given, setting client callback\n");
        SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
    }
#endif
    if (psksessf != NULL) {
        BIO *stmp = BIO_new_file(psksessf, "r");

        if (stmp == NULL) {
            BIO_printf(bio_err, "Can't open PSK session file %s\n", psksessf);
            ERR_print_errors(bio_err);
            goto end;
        }
        psksess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
        BIO_free(stmp);
        if (psksess == NULL) {
            BIO_printf(bio_err, "Can't read PSK session file %s\n", psksessf);
            ERR_print_errors(bio_err);
            goto end;
        }
    }
    if (psk_key != NULL || psksess != NULL)
        SSL_CTX_set_psk_use_session_callback(ctx, psk_use_session_cb);

#ifndef OPENSSL_NO_SRTP
    if (srtp_profiles != NULL) {
        /* Returns 0 on success! */
        if (SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles) != 0) {
            BIO_printf(bio_err, "Error setting SRTP profile\n");
            ERR_print_errors(bio_err);
            goto end;
        }
    }
#endif

    if (exc != NULL)
        ssl_ctx_set_excert(ctx, exc);

#if !defined(OPENSSL_NO_NEXTPROTONEG)
    if (next_proto.data != NULL)
        SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto);
#endif
    if (alpn_in) {
        size_t alpn_len;
        unsigned char *alpn = next_protos_parse(&alpn_len, alpn_in);

        if (alpn == NULL) {
            BIO_printf(bio_err, "Error parsing -alpn argument\n");
            goto end;
        }
        /* Returns 0 on success! */
        if (SSL_CTX_set_alpn_protos(ctx, alpn, alpn_len) != 0) {
            BIO_printf(bio_err, "Error setting ALPN\n");
            goto end;
        }
        OPENSSL_free(alpn);
    }

    for (i = 0; i < serverinfo_count; i++) {
        if (!SSL_CTX_add_client_custom_ext(ctx,
                                           serverinfo_types[i],
                                           NULL, NULL, NULL,
                                           serverinfo_cli_parse_cb, NULL)) {
            BIO_printf(bio_err,
                       "Warning: Unable to add custom extension %u, skipping\n",
                       serverinfo_types[i]);
        }
    }

    if (state)
        SSL_CTX_set_info_callback(ctx, apps_ssl_info_callback);

#ifndef OPENSSL_NO_CT
    /* Enable SCT processing, without early connection termination */
    if (ct_validation &&
        !SSL_CTX_enable_ct(ctx, SSL_CT_VALIDATION_PERMISSIVE)) {
        ERR_print_errors(bio_err);
        goto end;
    }

    if (!ctx_set_ctlog_list_file(ctx, ctlog_file)) {
        if (ct_validation) {
            ERR_print_errors(bio_err);
            goto end;
        }

        /*
         * If CT validation is not enabled, the log list isn't needed so don't
         * show errors or abort. We try to load it regardless because then we
         * can show the names of the logs any SCTs came from (SCTs may be seen
         * even with validation disabled).
         */
        ERR_clear_error();
    }
#endif

    SSL_CTX_set_verify(ctx, verify, verify_callback);

    if (!ctx_set_verify_locations(ctx, CAfile, CApath, noCAfile, noCApath)) {
        ERR_print_errors(bio_err);
        goto end;
    }

    ssl_ctx_add_crls(ctx, crls, crl_download);

    if (!set_cert_key_stuff(ctx, cert, key, chain, build_chain))
        goto end;

    if (!noservername) {
        tlsextcbp.biodebug = bio_err;
        SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
        SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
    }
# ifndef OPENSSL_NO_SRP
    if (srp_arg.srplogin) {
        if (!srp_lateuser && !SSL_CTX_set_srp_username(ctx, srp_arg.srplogin)) {
            BIO_printf(bio_err, "Unable to set SRP username\n");
            goto end;
        }
        srp_arg.msg = c_msg;
        srp_arg.debug = c_debug;
        SSL_CTX_set_srp_cb_arg(ctx, &srp_arg);
        SSL_CTX_set_srp_client_pwd_callback(ctx, ssl_give_srp_client_pwd_cb);
        SSL_CTX_set_srp_strength(ctx, srp_arg.strength);
        if (c_msg || c_debug || srp_arg.amp == 0)
            SSL_CTX_set_srp_verify_param_callback(ctx,
                                                  ssl_srp_verify_param_cb);
    }
# endif

    if (dane_tlsa_domain != NULL) {
        if (SSL_CTX_dane_enable(ctx) <= 0) {
            BIO_printf(bio_err,
                       "%s: Error enabling DANE TLSA authentication.\n",
                       prog);
            ERR_print_errors(bio_err);
            goto end;
        }
    }

    /*
     * In TLSv1.3 NewSessionTicket messages arrive after the handshake and can
     * come at any time. Therefore we use a callback to write out the session
     * when we know about it. This approach works for < TLSv1.3 as well.
     */
    SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_CLIENT
                                        | SSL_SESS_CACHE_NO_INTERNAL_STORE);
    SSL_CTX_sess_set_new_cb(ctx, new_session_cb);

    if (set_keylog_file(ctx, keylog_file))
        goto end;

    con = SSL_new(ctx);
    if (con == NULL)
        goto end;

    if (enable_pha)
        SSL_set_post_handshake_auth(con, 1);

    if (sess_in != NULL) {
        SSL_SESSION *sess;
        BIO *stmp = BIO_new_file(sess_in, "r");
        if (stmp == NULL) {
            BIO_printf(bio_err, "Can't open session file %s\n", sess_in);
            ERR_print_errors(bio_err);
            goto end;
        }
        sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
        BIO_free(stmp);
        if (sess == NULL) {
            BIO_printf(bio_err, "Can't open session file %s\n", sess_in);
            ERR_print_errors(bio_err);
            goto end;
        }
        if (!SSL_set_session(con, sess)) {
            BIO_printf(bio_err, "Can't set session\n");
            ERR_print_errors(bio_err);
            goto end;
        }

        SSL_SESSION_free(sess);
    }

    if (fallback_scsv)
        SSL_set_mode(con, SSL_MODE_SEND_FALLBACK_SCSV);

    if (!noservername && (servername != NULL || dane_tlsa_domain == NULL)) {
        if (servername == NULL) {
            if(host == NULL || is_dNS_name(host)) 
                servername = (host == NULL) ? "localhost" : host;
        }
        if (servername != NULL && !SSL_set_tlsext_host_name(con, servername)) {
            BIO_printf(bio_err, "Unable to set TLS servername extension.\n");
            ERR_print_errors(bio_err);
            goto end;
        }
    }

    if (dane_tlsa_domain != NULL) {
        if (SSL_dane_enable(con, dane_tlsa_domain) <= 0) {
            BIO_printf(bio_err, "%s: Error enabling DANE TLSA "
                       "authentication.\n", prog);
            ERR_print_errors(bio_err);
            goto end;
        }
        if (dane_tlsa_rrset == NULL) {
            BIO_printf(bio_err, "%s: DANE TLSA authentication requires at "
                       "least one -dane_tlsa_rrdata option.\n", prog);
            goto end;
        }
        if (tlsa_import_rrset(con, dane_tlsa_rrset) <= 0) {
            BIO_printf(bio_err, "%s: Failed to import any TLSA "
                       "records.\n", prog);
            goto end;
        }
        if (dane_ee_no_name)
            SSL_dane_set_flags(con, DANE_FLAG_NO_DANE_EE_NAMECHECKS);
    } else if (dane_tlsa_rrset != NULL) {
        BIO_printf(bio_err, "%s: DANE TLSA authentication requires the "
                   "-dane_tlsa_domain option.\n", prog);
        goto end;
    }

 re_start:
    if (init_client(&s, host, port, bindhost, bindport, socket_family,
                    socket_type, protocol) == 0) {
        BIO_printf(bio_err, "connect:errno=%d\n", get_last_socket_error());
        BIO_closesocket(s);
        goto end;
    }
    BIO_printf(bio_c_out, "CONNECTED(%08X)\n", s);

    if (c_nbio) {
        if (!BIO_socket_nbio(s, 1)) {
            ERR_print_errors(bio_err);
            goto end;
        }
        BIO_printf(bio_c_out, "Turned on non blocking io\n");
    }
#ifndef OPENSSL_NO_DTLS
    if (isdtls) {
        union BIO_sock_info_u peer_info;

#ifndef OPENSSL_NO_SCTP
        if (protocol == IPPROTO_SCTP)
            sbio = BIO_new_dgram_sctp(s, BIO_NOCLOSE);
        else
#endif
            sbio = BIO_new_dgram(s, BIO_NOCLOSE);

        if ((peer_info.addr = BIO_ADDR_new()) == NULL) {
            BIO_printf(bio_err, "memory allocation failure\n");
            BIO_closesocket(s);
            goto end;
        }
        if (!BIO_sock_info(s, BIO_SOCK_INFO_ADDRESS, &peer_info)) {
            BIO_printf(bio_err, "getsockname:errno=%d\n",
                       get_last_socket_error());
            BIO_ADDR_free(peer_info.addr);
            BIO_closesocket(s);
            goto end;
        }

        (void)BIO_ctrl_set_connected(sbio, peer_info.addr);
        BIO_ADDR_free(peer_info.addr);
        peer_info.addr = NULL;

        if (enable_timeouts) {
            timeout.tv_sec = 0;
            timeout.tv_usec = DGRAM_RCV_TIMEOUT;
            BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);

            timeout.tv_sec = 0;
            timeout.tv_usec = DGRAM_SND_TIMEOUT;
            BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
        }

        if (socket_mtu) {
            if (socket_mtu < DTLS_get_link_min_mtu(con)) {
                BIO_printf(bio_err, "MTU too small. Must be at least %ld\n",
                           DTLS_get_link_min_mtu(con));
                BIO_free(sbio);
                goto shut;
            }
            SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
            if (!DTLS_set_link_mtu(con, socket_mtu)) {
                BIO_printf(bio_err, "Failed to set MTU\n");
                BIO_free(sbio);
                goto shut;
            }
        } else {
            /* want to do MTU discovery */
            BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
        }
    } else
#endif /* OPENSSL_NO_DTLS */
        sbio = BIO_new_socket(s, BIO_NOCLOSE);

    if (nbio_test) {
        BIO *test;

        test = BIO_new(BIO_f_nbio_test());
        sbio = BIO_push(test, sbio);
    }

    if (c_debug) {
        BIO_set_callback(sbio, bio_dump_callback);
        BIO_set_callback_arg(sbio, (char *)bio_c_out);
    }
    if (c_msg) {
#ifndef OPENSSL_NO_SSL_TRACE
        if (c_msg == 2)
            SSL_set_msg_callback(con, SSL_trace);
        else
#endif
            SSL_set_msg_callback(con, msg_cb);
        SSL_set_msg_callback_arg(con, bio_c_msg ? bio_c_msg : bio_c_out);
    }

    if (c_tlsextdebug) {
        SSL_set_tlsext_debug_callback(con, tlsext_cb);
        SSL_set_tlsext_debug_arg(con, bio_c_out);
    }
#ifndef OPENSSL_NO_OCSP
    if (c_status_req) {
        SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
        SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
        SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
    }
#endif

    SSL_set_bio(con, sbio, sbio);
    SSL_set_connect_state(con);

    /* ok, lets connect */
    if (fileno_stdin() > SSL_get_fd(con))
        width = fileno_stdin() + 1;
    else
        width = SSL_get_fd(con) + 1;

    read_tty = 1;
    write_tty = 0;
    tty_on = 0;
    read_ssl = 1;
    write_ssl = 1;

    cbuf_len = 0;
    cbuf_off = 0;
    sbuf_len = 0;
    sbuf_off = 0;

    switch ((PROTOCOL_CHOICE) starttls_proto) {
    case PROTO_OFF:
        break;
    case PROTO_LMTP:
    case PROTO_SMTP:
        {
            /*
             * This is an ugly hack that does a lot of assumptions. We do
             * have to handle multi-line responses which may come in a single
             * packet or not. We therefore have to use BIO_gets() which does
             * need a buffering BIO. So during the initial chitchat we do
             * push a buffering BIO into the chain that is removed again
             * later on to not disturb the rest of the s_client operation.
             */
            int foundit = 0;
            BIO *fbio = BIO_new(BIO_f_buffer());

            BIO_push(fbio, sbio);
            /* Wait for multi-line response to end from LMTP or SMTP */
            do {
                mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
            } while (mbuf_len > 3 && mbuf[3] == '-');
            if (protohost == NULL)
                protohost = "mail.example.com";
            if (starttls_proto == (int)PROTO_LMTP)
                BIO_printf(fbio, "LHLO %s\r\n", protohost);
            else
                BIO_printf(fbio, "EHLO %s\r\n", protohost);
            (void)BIO_flush(fbio);
            /*
             * Wait for multi-line response to end LHLO LMTP or EHLO SMTP
             * response.
             */
            do {
                mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
                if (strstr(mbuf, "STARTTLS"))
                    foundit = 1;
            } while (mbuf_len > 3 && mbuf[3] == '-');
            (void)BIO_flush(fbio);
            BIO_pop(fbio);
            BIO_free(fbio);
            if (!foundit)
                BIO_printf(bio_err,
                           "Didn't find STARTTLS in server response,"
                           " trying anyway...\n");
            BIO_printf(sbio, "STARTTLS\r\n");
            BIO_read(sbio, sbuf, BUFSIZZ);
        }
        break;
    case PROTO_POP3:
        {
            BIO_read(sbio, mbuf, BUFSIZZ);
            BIO_printf(sbio, "STLS\r\n");
            mbuf_len = BIO_read(sbio, sbuf, BUFSIZZ);
            if (mbuf_len < 0) {
                BIO_printf(bio_err, "BIO_read failed\n");
                goto end;
            }
        }
        break;
    case PROTO_IMAP:
        {
            int foundit = 0;
            BIO *fbio = BIO_new(BIO_f_buffer());

            BIO_push(fbio, sbio);
            BIO_gets(fbio, mbuf, BUFSIZZ);
            /* STARTTLS command requires CAPABILITY... */
            BIO_printf(fbio, ". CAPABILITY\r\n");
            (void)BIO_flush(fbio);
            /* wait for multi-line CAPABILITY response */
            do {
                mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
                if (strstr(mbuf, "STARTTLS"))
                    foundit = 1;
            }
            while (mbuf_len > 3 && mbuf[0] != '.');
            (void)BIO_flush(fbio);
            BIO_pop(fbio);
            BIO_free(fbio);
            if (!foundit)
                BIO_printf(bio_err,
                           "Didn't find STARTTLS in server response,"
                           " trying anyway...\n");
            BIO_printf(sbio, ". STARTTLS\r\n");
            BIO_read(sbio, sbuf, BUFSIZZ);
        }
        break;
    case PROTO_FTP:
        {
            BIO *fbio = BIO_new(BIO_f_buffer());

            BIO_push(fbio, sbio);
            /* wait for multi-line response to end from FTP */
            do {
                mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
            }
            while (mbuf_len > 3 && (!isdigit(mbuf[0]) || !isdigit(mbuf[1]) || !isdigit(mbuf[2]) || mbuf[3] != ' '));
            (void)BIO_flush(fbio);
            BIO_pop(fbio);
            BIO_free(fbio);
            BIO_printf(sbio, "AUTH TLS\r\n");
            BIO_read(sbio, sbuf, BUFSIZZ);
        }
        break;
    case PROTO_XMPP:
    case PROTO_XMPP_SERVER:
        {
            int seen = 0;
            BIO_printf(sbio, "<stream:stream "
                       "xmlns:stream='http://etherx.jabber.org/streams' "
                       "xmlns='jabber:%s' to='%s' version='1.0'>",
                       starttls_proto == PROTO_XMPP ? "client" : "server",
                       protohost ? protohost : host);
            seen = BIO_read(sbio, mbuf, BUFSIZZ);
            if (seen < 0) {
                BIO_printf(bio_err, "BIO_read failed\n");
                goto end;
            }
            mbuf[seen] = '\0';
            while (!strstr
                   (mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'")
                   && !strstr(mbuf,
                              "<starttls xmlns=\"urn:ietf:params:xml:ns:xmpp-tls\""))
            {
                seen = BIO_read(sbio, mbuf, BUFSIZZ);

                if (seen <= 0)
                    goto shut;

                mbuf[seen] = '\0';
            }
            BIO_printf(sbio,
                       "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
            seen = BIO_read(sbio, sbuf, BUFSIZZ);
            if (seen < 0) {
                BIO_printf(bio_err, "BIO_read failed\n");
                goto shut;
            }
            sbuf[seen] = '\0';
            if (!strstr(sbuf, "<proceed"))
                goto shut;
            mbuf[0] = '\0';
        }
        break;
    case PROTO_TELNET:
        {
            static const unsigned char tls_do[] = {
                /* IAC    DO   START_TLS */
                   255,   253, 46
            };
            static const unsigned char tls_will[] = {
                /* IAC  WILL START_TLS */
                   255, 251, 46
            };
            static const unsigned char tls_follows[] = {
                /* IAC  SB   START_TLS FOLLOWS IAC  SE */
                   255, 250, 46,       1,      255, 240
            };
            int bytes;

            /* Telnet server should demand we issue START_TLS */
            bytes = BIO_read(sbio, mbuf, BUFSIZZ);
            if (bytes != 3 || memcmp(mbuf, tls_do, 3) != 0)
                goto shut;
            /* Agree to issue START_TLS and send the FOLLOWS sub-command */
            BIO_write(sbio, tls_will, 3);
            BIO_write(sbio, tls_follows, 6);
            (void)BIO_flush(sbio);
            /* Telnet server also sent the FOLLOWS sub-command */
            bytes = BIO_read(sbio, mbuf, BUFSIZZ);
            if (bytes != 6 || memcmp(mbuf, tls_follows, 6) != 0)
                goto shut;
        }
        break;
    case PROTO_CONNECT:
        {
            enum {
                error_proto,     /* Wrong protocol, not even HTTP */
                error_connect,   /* CONNECT failed */
                success
            } foundit = error_connect;
            BIO *fbio = BIO_new(BIO_f_buffer());

            BIO_push(fbio, sbio);
            BIO_printf(fbio, "CONNECT %s HTTP/1.0\r\n\r\n", connectstr);
            (void)BIO_flush(fbio);
            /*
             * The first line is the HTTP response.  According to RFC 7230,
             * it's formatted exactly like this:
             *
             * HTTP/d.d ddd Reason text\r\n
             */
            mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
            if (mbuf_len < (int)strlen("HTTP/1.0 200")) {
                BIO_printf(bio_err,
                           "%s: HTTP CONNECT failed, insufficient response "
                           "from proxy (got %d octets)\n", prog, mbuf_len);
                (void)BIO_flush(fbio);
                BIO_pop(fbio);
                BIO_free(fbio);
                goto shut;
            }
            if (mbuf[8] != ' ') {
                BIO_printf(bio_err,
                           "%s: HTTP CONNECT failed, incorrect response "
                           "from proxy\n", prog);
                foundit = error_proto;
            } else if (mbuf[9] != '2') {
                BIO_printf(bio_err, "%s: HTTP CONNECT failed: %s ", prog,
                           &mbuf[9]);
            } else {
                foundit = success;
            }
            if (foundit != error_proto) {
                /* Read past all following headers */
                do {
                    mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
                } while (mbuf_len > 2);
            }
            (void)BIO_flush(fbio);
            BIO_pop(fbio);
            BIO_free(fbio);
            if (foundit != success) {
                goto shut;
            }
        }
        break;
    case PROTO_IRC:
        {
            int numeric;
            BIO *fbio = BIO_new(BIO_f_buffer());

            BIO_push(fbio, sbio);
            BIO_printf(fbio, "STARTTLS\r\n");
            (void)BIO_flush(fbio);
            width = SSL_get_fd(con) + 1;

            do {
                numeric = 0;

                FD_ZERO(&readfds);
                openssl_fdset(SSL_get_fd(con), &readfds);
                timeout.tv_sec = S_CLIENT_IRC_READ_TIMEOUT;
                timeout.tv_usec = 0;
                /*
                 * If the IRCd doesn't respond within
                 * S_CLIENT_IRC_READ_TIMEOUT seconds, assume
                 * it doesn't support STARTTLS. Many IRCds
                 * will not give _any_ sort of response to a
                 * STARTTLS command when it's not supported.
                 */
                if (!BIO_get_buffer_num_lines(fbio)
                    && !BIO_pending(fbio)
                    && !BIO_pending(sbio)
                    && select(width, (void *)&readfds, NULL, NULL,
                              &timeout) < 1) {
                    BIO_printf(bio_err,
                               "Timeout waiting for response (%d seconds).\n",
                               S_CLIENT_IRC_READ_TIMEOUT);
                    break;
                }

                mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
                if (mbuf_len < 1 || sscanf(mbuf, "%*s %d", &numeric) != 1)
                    break;
                /* :example.net 451 STARTTLS :You have not registered */
                /* :example.net 421 STARTTLS :Unknown command */
                if ((numeric == 451 || numeric == 421)
                    && strstr(mbuf, "STARTTLS") != NULL) {
                    BIO_printf(bio_err, "STARTTLS not supported: %s", mbuf);
                    break;
                }
                if (numeric == 691) {
                    BIO_printf(bio_err, "STARTTLS negotiation failed: ");
                    ERR_print_errors(bio_err);
                    break;
                }
            } while (numeric != 670);

            (void)BIO_flush(fbio);
            BIO_pop(fbio);
            BIO_free(fbio);
            if (numeric != 670) {
                BIO_printf(bio_err, "Server does not support STARTTLS.\n");
                ret = 1;
                goto shut;
            }
        }
        break;
    case PROTO_MYSQL:
        {
            /* SSL request packet */
            static const unsigned char ssl_req[] = {
                /* payload_length,   sequence_id */
                   0x20, 0x00, 0x00, 0x01,
                /* payload */
                /* capability flags, CLIENT_SSL always set */
                   0x85, 0xae, 0x7f, 0x00,
                /* max-packet size */
                   0x00, 0x00, 0x00, 0x01,
                /* character set */
                   0x21,
                /* string[23] reserved (all [0]) */
                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
            };
            int bytes = 0;
            int ssl_flg = 0x800;
            int pos;
            const unsigned char *packet = (const unsigned char *)sbuf;

            /* Receiving Initial Handshake packet. */
            bytes = BIO_read(sbio, (void *)packet, BUFSIZZ);
            if (bytes < 0) {
                BIO_printf(bio_err, "BIO_read failed\n");
                goto shut;
            /* Packet length[3], Packet number[1] + minimum payload[17] */
            } else if (bytes < 21) {
                BIO_printf(bio_err, "MySQL packet too short.\n");
                goto shut;
            } else if (bytes != (4 + packet[0] +
                                 (packet[1] << 8) +
                                 (packet[2] << 16))) {
                BIO_printf(bio_err, "MySQL packet length does not match.\n");
                goto shut;
            /* protocol version[1] */
            } else if (packet[4] != 0xA) {
                BIO_printf(bio_err,
                           "Only MySQL protocol version 10 is supported.\n");
                goto shut;
            }

            pos = 5;
            /* server version[string+NULL] */
            for (;;) {
                if (pos >= bytes) {
                    BIO_printf(bio_err, "Cannot confirm server version. ");
                    goto shut;
                } else if (packet[pos++] == '\0') {
                    break;
                }
            }

            /* make sure we have at least 15 bytes left in the packet */
            if (pos + 15 > bytes) {
                BIO_printf(bio_err,
                           "MySQL server handshake packet is broken.\n");
                goto shut;
            }

            pos += 12; /* skip over conn id[4] + SALT[8] */
            if (packet[pos++] != '\0') { /* verify filler */
                BIO_printf(bio_err,
                           "MySQL packet is broken.\n");
                goto shut;
            }

            /* capability flags[2] */
            if (!((packet[pos] + (packet[pos + 1] << 8)) & ssl_flg)) {
                BIO_printf(bio_err, "MySQL server does not support SSL.\n");
                goto shut;
            }

            /* Sending SSL Handshake packet. */
            BIO_write(sbio, ssl_req, sizeof(ssl_req));
            (void)BIO_flush(sbio);
        }
        break;
    case PROTO_POSTGRES:
        {
            static const unsigned char ssl_request[] = {
                /* Length        SSLRequest */
                   0, 0, 0, 8,   4, 210, 22, 47
            };
            int bytes;

            /* Send SSLRequest packet */
            BIO_write(sbio, ssl_request, 8);
            (void)BIO_flush(sbio);

            /* Reply will be a single S if SSL is enabled */
            bytes = BIO_read(sbio, sbuf, BUFSIZZ);
            if (bytes != 1 || sbuf[0] != 'S')
                goto shut;
        }
        break;
    case PROTO_NNTP:
        {
            int foundit = 0;
            BIO *fbio = BIO_new(BIO_f_buffer());

            BIO_push(fbio, sbio);
            BIO_gets(fbio, mbuf, BUFSIZZ);
            /* STARTTLS command requires CAPABILITIES... */
            BIO_printf(fbio, "CAPABILITIES\r\n");
            (void)BIO_flush(fbio);
            /* wait for multi-line CAPABILITIES response */
            do {
                mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
                if (strstr(mbuf, "STARTTLS"))
                    foundit = 1;
            } while (mbuf_len > 1 && mbuf[0] != '.');
            (void)BIO_flush(fbio);
            BIO_pop(fbio);
            BIO_free(fbio);
            if (!foundit)
                BIO_printf(bio_err,
                           "Didn't find STARTTLS in server response,"
                           " trying anyway...\n");
            BIO_printf(sbio, "STARTTLS\r\n");
            mbuf_len = BIO_read(sbio, mbuf, BUFSIZZ);
            if (mbuf_len < 0) {
                BIO_printf(bio_err, "BIO_read failed\n");
                goto end;
            }
            mbuf[mbuf_len] = '\0';
            if (strstr(mbuf, "382") == NULL) {
                BIO_printf(bio_err, "STARTTLS failed: %s", mbuf);
                goto shut;
            }
        }
        break;
    case PROTO_SIEVE:
        {
            int foundit = 0;
            BIO *fbio = BIO_new(BIO_f_buffer());

            BIO_push(fbio, sbio);
            /* wait for multi-line response to end from Sieve */
            do {
                mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
                /*
                 * According to RFC 5804 § 1.7, capability
                 * is case-insensitive, make it uppercase
                 */
                if (mbuf_len > 1 && mbuf[0] == '"') {
                    make_uppercase(mbuf);
                    if (strncmp(mbuf, "\"STARTTLS\"", 10) == 0)
                        foundit = 1;
                }
            } while (mbuf_len > 1 && mbuf[0] == '"');
            (void)BIO_flush(fbio);
            BIO_pop(fbio);
            BIO_free(fbio);
            if (!foundit)
                BIO_printf(bio_err,
                           "Didn't find STARTTLS in server response,"
                           " trying anyway...\n");
            BIO_printf(sbio, "STARTTLS\r\n");
            mbuf_len = BIO_read(sbio, mbuf, BUFSIZZ);
            if (mbuf_len < 0) {
                BIO_printf(bio_err, "BIO_read failed\n");
                goto end;
            }
            mbuf[mbuf_len] = '\0';
            if (mbuf_len < 2) {
                BIO_printf(bio_err, "STARTTLS failed: %s", mbuf);
                goto shut;
            }
            /*
             * According to RFC 5804 § 2.2, response codes are case-
             * insensitive, make it uppercase but preserve the response.
             */
            strncpy(sbuf, mbuf, 2);
            make_uppercase(sbuf);
            if (strncmp(sbuf, "OK", 2) != 0) {
                BIO_printf(bio_err, "STARTTLS not supported: %s", mbuf);
                goto shut;
            }
        }
        break;
    case PROTO_LDAP:
        {
            /* StartTLS Operation according to RFC 4511 */
            static char ldap_tls_genconf[] = "asn1=SEQUENCE:LDAPMessage\n"
                "[LDAPMessage]\n"
                "messageID=INTEGER:1\n"
                "extendedReq=EXPLICIT:23A,IMPLICIT:0C,"
                "FORMAT:ASCII,OCT:1.3.6.1.4.1.1466.20037\n";
            long errline = -1;
            char *genstr = NULL;
            int result = -1;
            ASN1_TYPE *atyp = NULL;
            BIO *ldapbio = BIO_new(BIO_s_mem());
            CONF *cnf = NCONF_new(NULL);

            if (cnf == NULL) {
                BIO_free(ldapbio);
                goto end;
            }
            BIO_puts(ldapbio, ldap_tls_genconf);
            if (NCONF_load_bio(cnf, ldapbio, &errline) <= 0) {
                BIO_free(ldapbio);
                NCONF_free(cnf);
                if (errline <= 0) {
                    BIO_printf(bio_err, "NCONF_load_bio failed\n");
                    goto end;
                } else {
                    BIO_printf(bio_err, "Error on line %ld\n", errline);
                    goto end;
                }
            }
            BIO_free(ldapbio);
            genstr = NCONF_get_string(cnf, "default", "asn1");
            if (genstr == NULL) {
                NCONF_free(cnf);
                BIO_printf(bio_err, "NCONF_get_string failed\n");
                goto end;
            }
            atyp = ASN1_generate_nconf(genstr, cnf);
            if (atyp == NULL) {
                NCONF_free(cnf);
                BIO_printf(bio_err, "ASN1_generate_nconf failed\n");
                goto end;
            }
            NCONF_free(cnf);

            /* Send SSLRequest packet */
            BIO_write(sbio, atyp->value.sequence->data,
                      atyp->value.sequence->length);
            (void)BIO_flush(sbio);
            ASN1_TYPE_free(atyp);

            mbuf_len = BIO_read(sbio, mbuf, BUFSIZZ);
            if (mbuf_len < 0) {
                BIO_printf(bio_err, "BIO_read failed\n");
                goto end;
            }
            result = ldap_ExtendedResponse_parse(mbuf, mbuf_len);
            if (result < 0) {
                BIO_printf(bio_err, "ldap_ExtendedResponse_parse failed\n");
                goto shut;
            } else if (result > 0) {
                BIO_printf(bio_err, "STARTTLS failed, LDAP Result Code: %i\n",
                           result);
                goto shut;
            }
            mbuf_len = 0;
        }
        break;
    }

    if (early_data_file != NULL
            && ((SSL_get0_session(con) != NULL
                 && SSL_SESSION_get_max_early_data(SSL_get0_session(con)) > 0)
                || (psksess != NULL
                    && SSL_SESSION_get_max_early_data(psksess) > 0))) {
        BIO *edfile = BIO_new_file(early_data_file, "r");
        size_t readbytes, writtenbytes;
        int finish = 0;

        if (edfile == NULL) {
            BIO_printf(bio_err, "Cannot open early data file\n");
            goto shut;
        }

        while (!finish) {
            if (!BIO_read_ex(edfile, cbuf, BUFSIZZ, &readbytes))
                finish = 1;

            while (!SSL_write_early_data(con, cbuf, readbytes, &writtenbytes)) {
                switch (SSL_get_error(con, 0)) {
                case SSL_ERROR_WANT_WRITE:
                case SSL_ERROR_WANT_ASYNC:
                case SSL_ERROR_WANT_READ:
                    /* Just keep trying - busy waiting */
                    continue;
                default:
                    BIO_printf(bio_err, "Error writing early data\n");
                    BIO_free(edfile);
                    ERR_print_errors(bio_err);
                    goto shut;
                }
            }
        }

        BIO_free(edfile);
    }

    for (;;) {
        FD_ZERO(&readfds);
        FD_ZERO(&writefds);

        if (SSL_is_dtls(con) && DTLSv1_get_timeout(con, &timeout))
            timeoutp = &timeout;
        else
            timeoutp = NULL;

        if (!SSL_is_init_finished(con) && SSL_total_renegotiations(con) == 0
                && SSL_get_key_update_type(con) == SSL_KEY_UPDATE_NONE) {
            in_init = 1;
            tty_on = 0;
        } else {
            tty_on = 1;
            if (in_init) {
                in_init = 0;

                if (c_brief) {
                    BIO_puts(bio_err, "CONNECTION ESTABLISHED\n");
                    print_ssl_summary(con);
                }

                print_stuff(bio_c_out, con, full_log);
                if (full_log > 0)
                    full_log--;

                if (starttls_proto) {
                    BIO_write(bio_err, mbuf, mbuf_len);
                    /* We don't need to know any more */
                    if (!reconnect)
                        starttls_proto = PROTO_OFF;
                }

                if (reconnect) {
                    reconnect--;
                    BIO_printf(bio_c_out,
                               "drop connection and then reconnect\n");
                    do_ssl_shutdown(con);
                    SSL_set_connect_state(con);
                    BIO_closesocket(SSL_get_fd(con));
                    goto re_start;
                }
            }
        }

        ssl_pending = read_ssl && SSL_has_pending(con);

        if (!ssl_pending) {
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
            if (tty_on) {
                /*
                 * Note that select() returns when read _would not block_,
                 * and EOF satisfies that.  To avoid a CPU-hogging loop,
                 * set the flag so we exit.
                 */
                if (read_tty && !at_eof)
                    openssl_fdset(fileno_stdin(), &readfds);
#if !defined(OPENSSL_SYS_VMS)
                if (write_tty)
                    openssl_fdset(fileno_stdout(), &writefds);
#endif
            }
            if (read_ssl)
                openssl_fdset(SSL_get_fd(con), &readfds);
            if (write_ssl)
                openssl_fdset(SSL_get_fd(con), &writefds);
#else
            if (!tty_on || !write_tty) {
                if (read_ssl)
                    openssl_fdset(SSL_get_fd(con), &readfds);
                if (write_ssl)
                    openssl_fdset(SSL_get_fd(con), &writefds);
            }
#endif

            /*
             * Note: under VMS with SOCKETSHR the second parameter is
             * currently of type (int *) whereas under other systems it is
             * (void *) if you don't have a cast it will choke the compiler:
             * if you do have a cast then you can either go for (int *) or
             * (void *).
             */
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
            /*
             * Under Windows/DOS we make the assumption that we can always
             * write to the tty: therefore if we need to write to the tty we
             * just fall through. Otherwise we timeout the select every
             * second and see if there are any keypresses. Note: this is a
             * hack, in a proper Windows application we wouldn't do this.
             */
            i = 0;
            if (!write_tty) {
                if (read_tty) {
                    tv.tv_sec = 1;
                    tv.tv_usec = 0;
                    i = select(width, (void *)&readfds, (void *)&writefds,
                               NULL, &tv);
                    if (!i && (!has_stdin_waiting() || !read_tty))
                        continue;
                } else
                    i = select(width, (void *)&readfds, (void *)&writefds,
                               NULL, timeoutp);
            }
#else
            i = select(width, (void *)&readfds, (void *)&writefds,
                       NULL, timeoutp);
#endif
            if (i < 0) {
                BIO_printf(bio_err, "bad select %d\n",
                           get_last_socket_error());
                goto shut;
            }
        }

        if (SSL_is_dtls(con) && DTLSv1_handle_timeout(con) > 0)
            BIO_printf(bio_err, "TIMEOUT occurred\n");

        if (!ssl_pending && FD_ISSET(SSL_get_fd(con), &writefds)) {
            k = SSL_write(con, &(cbuf[cbuf_off]), (unsigned int)cbuf_len);
            switch (SSL_get_error(con, k)) {
            case SSL_ERROR_NONE:
                cbuf_off += k;
                cbuf_len -= k;
                if (k <= 0)
                    goto end;
                /* we have done a  write(con,NULL,0); */
                if (cbuf_len <= 0) {
                    read_tty = 1;
                    write_ssl = 0;
                } else {        /* if (cbuf_len > 0) */

                    read_tty = 0;
                    write_ssl = 1;
                }
                break;
            case SSL_ERROR_WANT_WRITE:
                BIO_printf(bio_c_out, "write W BLOCK\n");
                write_ssl = 1;
                read_tty = 0;
                break;
            case SSL_ERROR_WANT_ASYNC:
                BIO_printf(bio_c_out, "write A BLOCK\n");
                wait_for_async(con);
                write_ssl = 1;
                read_tty = 0;
                break;
            case SSL_ERROR_WANT_READ:
                BIO_printf(bio_c_out, "write R BLOCK\n");
                write_tty = 0;
                read_ssl = 1;
                write_ssl = 0;
                break;
            case SSL_ERROR_WANT_X509_LOOKUP:
                BIO_printf(bio_c_out, "write X BLOCK\n");
                break;
            case SSL_ERROR_ZERO_RETURN:
                if (cbuf_len != 0) {
                    BIO_printf(bio_c_out, "shutdown\n");
                    ret = 0;
                    goto shut;
                } else {
                    read_tty = 1;
                    write_ssl = 0;
                    break;
                }

            case SSL_ERROR_SYSCALL:
                if ((k != 0) || (cbuf_len != 0)) {
                    BIO_printf(bio_err, "write:errno=%d\n",
                               get_last_socket_error());
                    goto shut;
                } else {
                    read_tty = 1;
                    write_ssl = 0;
                }
                break;
            case SSL_ERROR_WANT_ASYNC_JOB:
                /* This shouldn't ever happen in s_client - treat as an error */
            case SSL_ERROR_SSL:
                ERR_print_errors(bio_err);
                goto shut;
            }
        }
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_VMS)
        /* Assume Windows/DOS/BeOS can always write */
        else if (!ssl_pending && write_tty)
#else
        else if (!ssl_pending && FD_ISSET(fileno_stdout(), &writefds))
#endif
        {
#ifdef CHARSET_EBCDIC
            ascii2ebcdic(&(sbuf[sbuf_off]), &(sbuf[sbuf_off]), sbuf_len);
#endif
            i = raw_write_stdout(&(sbuf[sbuf_off]), sbuf_len);

            if (i <= 0) {
                BIO_printf(bio_c_out, "DONE\n");
                ret = 0;
                goto shut;
            }

            sbuf_len -= i;
            sbuf_off += i;
            if (sbuf_len <= 0) {
                read_ssl = 1;
                write_tty = 0;
            }
        } else if (ssl_pending || FD_ISSET(SSL_get_fd(con), &readfds)) {
#ifdef RENEG
            {
                static int iiii;
                if (++iiii == 52) {
                    SSL_renegotiate(con);
                    iiii = 0;
                }
            }
#endif
            k = SSL_read(con, sbuf, 1024 /* BUFSIZZ */ );

            switch (SSL_get_error(con, k)) {
            case SSL_ERROR_NONE:
                if (k <= 0)
                    goto end;
                sbuf_off = 0;
                sbuf_len = k;

                read_ssl = 0;
                write_tty = 1;
                break;
            case SSL_ERROR_WANT_ASYNC:
                BIO_printf(bio_c_out, "read A BLOCK\n");
                wait_for_async(con);
                write_tty = 0;
                read_ssl = 1;
                if ((read_tty == 0) && (write_ssl == 0))
                    write_ssl = 1;
                break;
            case SSL_ERROR_WANT_WRITE:
                BIO_printf(bio_c_out, "read W BLOCK\n");
                write_ssl = 1;
                read_tty = 0;
                break;
            case SSL_ERROR_WANT_READ:
                BIO_printf(bio_c_out, "read R BLOCK\n");
                write_tty = 0;
                read_ssl = 1;
                if ((read_tty == 0) && (write_ssl == 0))
                    write_ssl = 1;
                break;
            case SSL_ERROR_WANT_X509_LOOKUP:
                BIO_printf(bio_c_out, "read X BLOCK\n");
                break;
            case SSL_ERROR_SYSCALL:
                ret = get_last_socket_error();
                if (c_brief)
                    BIO_puts(bio_err, "CONNECTION CLOSED BY SERVER\n");
                else
                    BIO_printf(bio_err, "read:errno=%d\n", ret);
                goto shut;
            case SSL_ERROR_ZERO_RETURN:
                BIO_printf(bio_c_out, "closed\n");
                ret = 0;
                goto shut;
            case SSL_ERROR_WANT_ASYNC_JOB:
                /* This shouldn't ever happen in s_client. Treat as an error */
            case SSL_ERROR_SSL:
                ERR_print_errors(bio_err);
                goto shut;
            }
        }
/* OPENSSL_SYS_MSDOS includes OPENSSL_SYS_WINDOWS */
#if defined(OPENSSL_SYS_MSDOS)
        else if (has_stdin_waiting())
#else
        else if (FD_ISSET(fileno_stdin(), &readfds))
#endif
        {
            if (crlf) {
                int j, lf_num;

                i = raw_read_stdin(cbuf, BUFSIZZ / 2);
                lf_num = 0;
                /* both loops are skipped when i <= 0 */
                for (j = 0; j < i; j++)
                    if (cbuf[j] == '\n')
                        lf_num++;
                for (j = i - 1; j >= 0; j--) {
                    cbuf[j + lf_num] = cbuf[j];
                    if (cbuf[j] == '\n') {
                        lf_num--;
                        i++;
                        cbuf[j + lf_num] = '\r';
                    }
                }
                assert(lf_num == 0);
            } else
                i = raw_read_stdin(cbuf, BUFSIZZ);
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
            if (i == 0)
                at_eof = 1;
#endif

            if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q' && cmdletters))) {
                BIO_printf(bio_err, "DONE\n");
                ret = 0;
                goto shut;
            }

            if ((!c_ign_eof) && (cbuf[0] == 'R' && cmdletters)) {
                BIO_printf(bio_err, "RENEGOTIATING\n");
                SSL_renegotiate(con);
                cbuf_len = 0;
	    } else if (!c_ign_eof && (cbuf[0] == 'K' || cbuf[0] == 'k' )
                    && cmdletters) {
                BIO_printf(bio_err, "KEYUPDATE\n");
                SSL_key_update(con,
                               cbuf[0] == 'K' ? SSL_KEY_UPDATE_REQUESTED
                                              : SSL_KEY_UPDATE_NOT_REQUESTED);
                cbuf_len = 0;
            }
#ifndef OPENSSL_NO_HEARTBEATS
            else if ((!c_ign_eof) && (cbuf[0] == 'B' && cmdletters)) {
                BIO_printf(bio_err, "HEARTBEATING\n");
                SSL_heartbeat(con);
                cbuf_len = 0;
            }
#endif
            else {
                cbuf_len = i;
                cbuf_off = 0;
#ifdef CHARSET_EBCDIC
                ebcdic2ascii(cbuf, cbuf, i);
#endif
            }

            write_ssl = 1;
            read_tty = 0;
        }
    }

    ret = 0;
 shut:
    if (in_init)
        print_stuff(bio_c_out, con, full_log);
    do_ssl_shutdown(con);

    /*
     * If we ended with an alert being sent, but still with data in the
     * network buffer to be read, then calling BIO_closesocket() will
     * result in a TCP-RST being sent. On some platforms (notably
     * Windows) then this will result in the peer immediately abandoning
     * the connection including any buffered alert data before it has
     * had a chance to be read. Shutting down the sending side first,
     * and then closing the socket sends TCP-FIN first followed by
     * TCP-RST. This seems to allow the peer to read the alert data.
     */
    shutdown(SSL_get_fd(con), 1); /* SHUT_WR */
    /*
     * We just said we have nothing else to say, but it doesn't mean that
     * the other side has nothing. It's even recommended to consume incoming
     * data. [In testing context this ensures that alerts are passed on...]
     */
    timeout.tv_sec = 0;
    timeout.tv_usec = 500000;  /* some extreme round-trip */
    do {
        FD_ZERO(&readfds);
        openssl_fdset(s, &readfds);
    } while (select(s + 1, &readfds, NULL, NULL, &timeout) > 0
             && BIO_read(sbio, sbuf, BUFSIZZ) > 0);

    BIO_closesocket(SSL_get_fd(con));
 end:
    if (con != NULL) {
        if (prexit != 0)
            print_stuff(bio_c_out, con, 1);
        SSL_free(con);
    }
    SSL_SESSION_free(psksess);
#if !defined(OPENSSL_NO_NEXTPROTONEG)
    OPENSSL_free(next_proto.data);
#endif
    SSL_CTX_free(ctx);
    set_keylog_file(NULL, NULL);
    X509_free(cert);
    sk_X509_CRL_pop_free(crls, X509_CRL_free);
    EVP_PKEY_free(key);
    sk_X509_pop_free(chain, X509_free);
    OPENSSL_free(pass);
#ifndef OPENSSL_NO_SRP
    OPENSSL_free(srp_arg.srppassin);
#endif
    OPENSSL_free(connectstr);
    OPENSSL_free(bindstr);
    OPENSSL_free(host);
    OPENSSL_free(port);
    X509_VERIFY_PARAM_free(vpm);
    ssl_excert_free(exc);
    sk_OPENSSL_STRING_free(ssl_args);
    sk_OPENSSL_STRING_free(dane_tlsa_rrset);
    SSL_CONF_CTX_free(cctx);
    OPENSSL_clear_free(cbuf, BUFSIZZ);
    OPENSSL_clear_free(sbuf, BUFSIZZ);
    OPENSSL_clear_free(mbuf, BUFSIZZ);
    release_engine(e);
    BIO_free(bio_c_out);
    bio_c_out = NULL;
    BIO_free(bio_c_msg);
    bio_c_msg = NULL;
    return ret;
}